

SolarEnergyManager v1.0
PCBs from Bachelor Thesis
- Size
- 102 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 229
- Nets
- 181
- Pads
- 728
- Tracks, vias
- 2,041, 185
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Jul 2024
- Updated
- 26 Jul 2024
Overview
SolarEnergyManager v1.0 is an open-source printed circuit board by JasonFJ9, from the JasonFJ9/BachelorThesisPCBs repository on GitHub. It is a 4-layer board of 102 × 70 mm with 229 parts on 181 nets, routed with 2,041 tracks and 185 vias.
It is built around the RP2040, TMP1075DSGR and VEML7700-TT, with the AP2112K-3.3TRG1, TL3365AF180QG and BSS138 among its other parts. Its parts include 85 resistors, 29 capacitors, 10 ICs, 10 transistors and 7 diodes. It belongs with the RP2040 boards of this library.
Main components
10RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TMP1075DSGR
WSON-8-EP(2x2)-55℃~+125℃ 1.7V~5.5V 12bit 4uA 7ms Factory temperature calibration、Temperature threshold monitoring I2C、SMBus ±1℃ WSON-8-EP(2x2) Temperature Sensors ROHSTexas InstrumentsTemperature SensorsVEML7700-TT
SMD-4P-25℃~+85℃ 120klx 16bit 2.35mm 2.5V~3.6V 3mm 6.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTL3365AF180QG
SMD-4P,4.2x3.2mm-20℃~+70℃ 1.8N 100,000 cycles 12V 2.5mm 3.2mm 4.2mm 50mA J-Lead Oval Button SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.2mm Tactile Switches ROHSE-SwitchTactile SwitchesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsB5817W-TP
SOD-123-65℃~+125℃ 1 Independent 10A 1A 1mA@20V 20V 750mV@3A SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky DiodesS2B-PH-SM4-TB
2A 100V, Pitch 2.0mm, 2 Positions Disconnectable Crimp Style, SMD Male Header, Side EntryJSTUncategorisedABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdBachelorThesisPCBs
PCBs from Bachelor Thesis
Parts
229| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 10kR | Resistor_SMD:R_0402_1005Metric | R1L1, R1L2, R1L3, R1L4, R1L5, R1L6, R209, R210, R211, R212, R301, R302, R305, R306, R403, R404 +22 |
| 15 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C203, C204, C205, C206, C207, C208, C211, C212, C215, C302, C304, C401, C403, C404, C406 |
| 15 | 01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | C_Load1, J_RST1, J_RST2, P26, P30, PrbA_AEM1, PrbA1, PrbA2, PrbA3, PrbV_AEM1, PrbV1, PrbV2, PrbV3, R_Load1, USB_SRC1 |
| 13 | 1kR | Resistor_SMD:R_0402_1005Metric | R203, R601, R602, R603, R604, R605, R606, R613, R614, R615, R616, R617, R618 |
| 12 | 01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J_AEM_OUT1, J_AEM_OUT2, LDO1, P_CFG0, P_CFG1, P_CFG2, P_ENHV1, P_ENLV1, P_SELMPP0, P_SELMPP1, VRegT1, VRegT2 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, Ha1, Ha2, Ha3, Ha4 |
| 7 | SI4204DY-T1-GE3 | SI4204DY-T1-GE3:SOIC127P600X175-8N | Q6S12, Q601, Q602, Q603, Q604, Q605, Q606 |
| 6 | 0R | Resistor_SMD:R_0603_1608Metric | R2, R3, R25, R26, R29, R30 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C209, C210, C501, C502, C503, C504 |
| 6 | TBD | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R6, R7, R8 |
| 5 | 0.5R | Resistor_SMD:R_0805_2012Metric | RsA1, RsA2, RsA3, RsA4, RsA5 |
| 5 | 0R | Resistor_SMD:R_0402_1005Metric | R303, R304, R307, R308, R401 |
| 5 | 1.5kR | Resistor_SMD:R_0402_1005Metric | R204, R205, R206, R504, R506 |
| 5 | 691137710002 | 691137710002:CONN2_710002_WRE | J_BATT2, J_PRIM2, J_SC1, J_SC2, J_SRC1 |
| 5 | LED | LED_SMD:LED_0402_1005Metric | D201, D202, D203, USB_LED1, VReg_LED1 |
| 5 | TL3365AF180QG | TL3365AF180QG:TL3365AF180QG | S201, S202, S203, S204, S205 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | CBUCK1, CHV1, CLV1, CSRC1 |
| 3 | 150kR | Resistor_SMD:R_0402_1005Metric | RVd1, RVd2, RVd3 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C214, C301, C303 |
| 3 | BSS138 | BSS138:SOT95P240X120-3N | Q1, Q2, Q3 |
| 3 | JP | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | AH0, AH1, AH2 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R27, R28 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C402, C405 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C201, C202 |
| 2 | 220uF | Capacitor_SMD:C_1206_3216Metric | CBATT1, CLP5 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R201, R202 |
| 2 | 4.7KR | KiCad_Resistor_SMD:R_0402_1005Metric | R213, R214 |
| 2 | 499R | Resistor_SMD:R_0402_1005Metric | R207, RA1 |
| 2 | 5kR | Resistor_SMD:R_0402_1005Metric | R501, R502 |
| 2 | AP2112K-3.3TRG1 | AP2112K-3.3TRG1:SOT95P282X130-5N | IC501, IC502 |
| 2 | B5817W-TP | B5817W-TP:SOD3716X135N | D1, D501 |
| 2 | PAC1934T-I_JQ | PAC1934T-I_JQ:QFN65P400X400X55-17N-D | IC301, IC302 |
| 2 | S2B-PH-SM4-TB | S2B_PH_SM4_TB:CONN_S2B-PH-SM4-TB_JST | J_BATT1, J_PRIM1 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C213 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | CLP3 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | RLS3 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | CLP1 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | LBUCK1 |
| 1 | 10uH | Inductor_SMD:L_Vishay_IFSC-1515AH_4x4x1.8mm | LBOOST1 |
| 1 | 150uF | Capacitor_SMD:C_1206_3216Metric | CLP4 |
| 1 | 1R | Resistor_SMD:R_0805_2012Metric | RLS0 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | CLP0 |
| 1 | 2.2R | Resistor_SMD:R_0805_2012Metric | RLS1 |
| 1 | 22R | Resistor_SMD:R_0805_2012Metric | RLS4 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | CBOOST1 |
| 1 | 2kR | Resistor_SMD:R_0402_1005Metric | R208 |
| 1 | 33R | Resistor_SMD:R_0805_2012Metric | RLS5 |
| 1 | 4.7R | Resistor_SMD:R_0805_2012Metric | RLS2 |
| 1 | 4.7kR | Resistor_SMD:R_0402_1005Metric | R402 |
| 1 | 47R | Resistor_SMD:R_0805_2012Metric | RLS6 |
| 1 | 47mF | Custom_Footprints_Lib:Capacitor_Radial_D12mm_P6.8mm | SC1 |
| 1 | 47uF | Capacitor_SMD:C_1206_3216Metric | CLP2 |
| 1 | 806R | Resistor_SMD:R_0402_1005Metric | RA2 |
| 1 | ABM8-272-T3 | ABM8-272-T3:ABM8272T3 | Y201 |
| 1 | AEM10941-QFN | AEM10941-QFN:QFN50P500X500X90-29N-D | IC1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J201 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J202 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J203 |
| 1 | Conn_02x02 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | SC_T_1 |
| 1 | MCP23017-E_ML | MCP23017-E_ML:QFN65P600X600X100-29N-D | IC403 |
| 1 | MEM2052-00-195-00-A_REVA | MEM2052-00-195-00-A_REVA:GCT_MEM2052-00-195-00-A_REVA | J401 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | IC201 |
| 1 | TMP1075DSGR | TMP1075DSGR:SON50P200X200X80-9N | IC402 |
| 1 | USB4105-GF-A | USB4105_GF_A:GCT_USB4105-GF-A | J501 |
| 1 | VEML7700-TT | VEML7700-TT:VEML7700 | IC401 |
| 1 | W25Q16JVUXIQ_TR | W25Q16JVUXIQ_TR:SON50P300X200X60-9N | IC202 |
More from JasonFJ9/BachelorThesisPCBs
1- 4 layers70 × 40 mm

Similar boards
- 4 layers50.8 × 22.9 mm

Eos feather rp2040
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
56 parts8MIT - 2 layers131.2 × 132.5 mm

- 2 layers65 × 30 mm

Golden rp2040 usb hid
mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.
35 parts2Apache-2.0 - 2 layers100 × 75 mm

Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 4 layers140.8 × 28.5 mm

- 4 layers85.6 × 54 mm

SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
92 parts39 - 2 layers60 × 43 mm

Desktop
dyu134/ESP-HI-PLUS
The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.
62 parts - 2 layers50.8 × 44.5 mm

Questions
How big is the SolarEnergyManager v1.0 PCB?
It measures 102 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SolarEnergyManager v1.0 use?
229 parts, built around the RP2040, TMP1075DSGR, VEML7700-TT and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolarEnergyManager v1.0 KiCad files?
From the JasonFJ9/BachelorThesisPCBs repository on GitHub, at the commit this page was made from: the board is SolarEnergyManager_v1.0/SolarEnergyManager_v1.0.kicad_pcb and its schematic SolarCurveTracer_v1.0/LoadCircuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolarEnergyManager v1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask JasonFJ9 before reusing the design.