
Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
Texas InstrumentsExtended
-55℃~+125℃ 1.7V~5.5V 12bit 4uA 7ms Factory temperature calibration、Temperature threshold monitoring I2C、SMBus ±1℃ WSON-8-EP(2x2) Temperature Sensors ROHS
The TMP1075DSGR is a temperature Sensor made by Texas Instruments in a WSON-8-EP(2x2) package with 9 pins. -55℃~+125℃ 1.7V~5.5V 12bit 4uA 7ms Factory temperature calibration、Temperature threshold monitoring I2C、SMBus ±1℃ WSON-8-EP(2x2) Temperature Sensors ROHS.
PCBKit's library has its KiCad symbol (Sensor_Temperature:TMP1075DSG, from KiCad's library) and its footprint (Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, from KiCad's library), ready for a KiCad board. 34,639 are in stock at JLCPCB (part C2870250). 4 open-source boards in 3 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Power supply, V+ | TMP1075 | max 6.5 V | 5 |
| Input voltage SCL, SDA, A1, A0 | TMP1075 | min -0.3 · max 6.5 V | 5 |
| Input voltage A2 pin | TMP1075; maximum is (V+) + 0.3 V | min -0.3 V | 5 |
| Operating temperature | min -55 · max 150 °C | 5 | |
| Junction temperature, TJ TJ | max 150 °C | 5 | |
| Storage temperature, Tstg Tstg | min -60 · max 130 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; table VALUE column | typ 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101; table VALUE column | typ 1000 V | 5 |
| Supply voltage | TMP1075 | min 1.7 · max 5.5 V | 5 |
| Operating free-air temperature, TA TA | TMP1075 | min -55 · max 125 °C | 5 |
| Junction-to-ambient thermal resistance RθJA | TMP1075, DSG (WSON), 8 PINS | typ 87.4 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | TMP1075, DSG (WSON), 8 PINS | typ 111.1 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | TMP1075, DSG (WSON), 8 PINS | typ 54 °C/W | 6 |
| Junction-to-top characterization parameter ΨJT | TMP1075, DSG (WSON), 8 PINS | typ 9.8 °C/W | 6 |
| Junction-to-board characterization parameter ΨJB | TMP1075, DSG (WSON), 8 PINS | typ 54.4 °C/W | 6 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | TMP1075, DSG (WSON), 8 PINS | typ 28.1 °C/W | 6 |
| Thermal mass MT | TMP1075, DSG (WSON), 8 PINS | typ 5 mJ/°C | 6 |
| Range | Temperature input | min -55 · max 125 °C | 6 |
| Accuracy (temperature error) | DSG; –40°C to 75°C; typical and maximum are ± values | typ 0.25 · max 1 °C | 6 |
| Accuracy (temperature error) | DSG; –55°C to 125°C; typical and maximum are ± values | typ 0.25 · max 2 °C | 6 |
| Accuracy (temperature error) vs supply | PSRR; maximum is ± value | max 0.03 °C/V | 6 |
| Resolution | 1 LSB (12 bit) | typ 0.0625 °C | 6 |
| Repeatability | 25°C, V+= 3.3 V; one-shot mode setup, 1 sample per minute for 24 hours | typ 0.0625 °C | 6 |
| Long-term drift | 500 hours at 150°C, 5.5 V | typ 0.0625 °C | 6 |
| Input capacitance | typ 5 pF | 6 | |
| Leakage input current IIN | min -0.25 · typ 0 · max 0.25 uA | 6 | |
| Input voltage hysteresis | SCL and SDA pins | typ 600 mV | 6 |
| Low-level output logic VOL | IOL = -3 mA, SDA and ALERT pins | min 0 · typ 0.15 · max 0.4 V | 6 |
| ADC Conversion time | one-shot mode | min 4.5 · typ 5.5 · max 7 ms | 6 |
| Conversion Time TC | R1 = 0, R0 = 0 (default) | typ 27.5 ms | 6 |
| Conversion Time TC | R1 = 0, R0 = 1 | typ 55 ms | 6 |
| Conversion Time TC | R1 = 1, R0 = 0 | typ 110 ms | 6 |
| Conversion Time TC | R1 = 1, R0 = 1 | typ 220 ms | 6 |
| Reset time | The time between reset until ADC conversion start | typ 0.3 ms | 6 |
| Conversion Rate Variation | min -10 · typ 0 · max 10 % | 6 | |
| Operating voltage range | min 1.7 · typ 3.3 · max 5.5 V | 6 | |
| Quiescent current (serial bus inactive) IQ | R1 = 0, R0 = 0 (default) | typ 10 · max 20 uA | 7 |
| Quiescent current (serial bus inactive) IQ | R1 = 0, R0 = 1 | typ 5.5 · max 9 uA | 7 |
| Quiescent current (serial bus inactive) IQ | R1 = 1, R0 = 0 | typ 4 · max 6 uA | 7 |
| Quiescent current (serial bus inactive) IQ | R1 = 1, R0 = 1 | typ 2.7 · max 4 uA | 7 |
| Quiescent current (serial bus inactive) IQ | During 5.5 ms active conversion | typ 52 · max 85 uA | 7 |
| Shutdown current ISD | Serial bus active, SCL frequency = 400 kHz, A0=A1=A2=GND | typ 13 uA | 7 |
| Shutdown current ISD | Serial bus inactive, A0=A1=A2=SCL=SDA=V+, 25°C | typ 0.37 · max 0.65 uA | 7 |
| Shutdown current ISD | Serial bus inactive, A0=A1=A2=SCL=SDA=V+ | typ 0.37 · max 3.5 uA | 7 |
| Power supply thresholds | Supply rising, Power-on Reset | typ 1.22 V | 7 |
| Power supply thresholds | Supply failing, Brown-out Detect | typ 1.1 V | 7 |
| SCL operating frequency f(SCL) | FAST MODE | min 0.001 · max 0.4 MHz | 8 |
| SCL operating frequency f(SCL) | HIGH-SPEED MODE | min 0.001 · max 2.56 MHz | 8 |
| Bus-free time between STOP and START conditions t(BUF) | FAST MODE | min 1300 ns | 8 |
| Bus-free time between STOP and START conditions t(BUF) | HIGH-SPEED MODE | min 160 ns | 8 |
| Hold time after repeated START condition. After this period, the first clock is generated. t(HDSTA) | FAST MODE | min 600 ns | 8 |
| Hold time after repeated START condition. After this period, the first clock is generated. t(HDSTA) | HIGH-SPEED MODE | min 160 ns | 8 |
| Repeated START condition setup time t(SUSTA) | FAST MODE | min 600 ns | 8 |
| Repeated START condition setup time t(SUSTA) | HIGH-SPEED MODE | min 160 ns | 8 |
| STOP condition setup time t(SUSTO) | FAST MODE | min 600 ns | 8 |
| STOP condition setup time t(SUSTO) | HIGH-SPEED MODE | min 160 ns | 8 |
| Data hold time t(HDDAT) | FAST MODE | min 0 ns | 8 |
| Data hold time t(HDDAT) | HIGH-SPEED MODE | min 0 · max 130 ns | 8 |
| Data setup time t(SUDAT) | FAST MODE | min 100 ns | 8 |
| Data setup time t(SUDAT) | HIGH-SPEED MODE | min 20 ns | 8 |
| SCL clock low period t(LOW) | FAST MODE | min 1300 ns | 8 |
| SCL clock low period t(LOW) | HIGH-SPEED MODE | min 250 ns | 8 |
| SCL clock high period t(HIGH) | FAST MODE | min 600 ns | 8 |
| SCL clock high period t(HIGH) | HIGH-SPEED MODE | min 60 ns | 8 |
| Data valid time (data response time) t(VDAT) | FAST MODE | max 900 ns | 8 |
| Data valid time (data response time) t(VDAT) | HIGH-SPEED MODE | max 130 ns | 8 |
| Data fall time tFDA | FAST MODE | max 300 ns | 8 |
| Data fall time tFDA | HIGH-SPEED MODE | max 100 ns | 8 |
| Clock rise time tR | FAST MODE | max 300 ns | 8 |
| Clock rise time tR | HIGH-SPEED MODE | max 40 ns | 8 |
| Clock fall time tF | FAST MODE | max 300 ns | 8 |
| Clock fall time tF | HIGH-SPEED MODE | max 40 ns | 8 |
| Timeout (SCL = SDA = GND) ttimeout | FAST MODE | min 20 · max 30 ms | 8 |
| Timeout (SCL = SDA = GND) ttimeout | HIGH-SPEED MODE | min 20 · max 30 ms | 8 |
| Clock/ data rise time for SCL = 100 kHz tRC | FAST MODE | max 1000 ns | 8 |
| Spike filter for I3C compatibility tLPF | SCL= 12.5 MHz | typ 50 ns | 9 |

DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock



Yes. The symbol is Sensor_Temperature:TMP1075DSG and the footprint Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
WSON-8-EP(2x2), with 9 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2870250, with 34,639 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the TMP1075DSGT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.