2 layers97.5 × 67.1 mm
2 layers68.8 × 45.7 mm
Controller
ksmonkey123/moba313rd generation moba control
- Size
- 68.8 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 24
- Pads
- 131
- Tracks, vias
- 198, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 May 2021
- Updated
- 5 Mar 2024
Overview
Controller is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/moba3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.8 × 45.7 mm with 21 parts on 24 nets, routed with 198 tracks and 10 vias.
It is built around the ATMEGA328P-AU, MAX481EPA+ and MAX488ESA+. Its parts include 7 resistors, 3 capacitors, 3 ICs, 3 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX481EPA+
PDIP-8-40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver ±15kV PDIP-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
MAX488ESA+
SO-8-40℃~+85℃ 1 1 250Kbps 32 4.75V~5.25V Transceiver SO-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
README
README.mdmoba3
3rd generation moba control
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2 |
| 2 | RJ45_LED_Shielded | customs:RND_RJ45_LED | J4, J5 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 220uF | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C3 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | MAX481E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MAX488E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | POWER | Connector_Wago:Wago_734-133_1x03_P3.50mm_Vertical | POWER1 |
Questions
How big is the Controller PCB?
It measures 68.8 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
21 parts, built around the ATMEGA328P-AU, MAX481EPA+ and MAX488ESA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the ksmonkey123/moba3 repository on GitHub, at the commit this page was made from: the board is pcbs/controller/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ksmonkey123/moba3
6- 2 layers52.7 × 53.3 mm
- 2 layers85.1 × 62.9 mm
- 2 layers77.7 × 45.7 mm
- 2 layers44.4 × 33.7 mm
- 2 layers54 × 53.3 mm
Similar boards
- 2 layers88.9 × 63.5 mm
- 2 layers67.3 × 20.3 mm
- 2 layers40 × 51 mm
- 2 layers129.5 × 83.5 mm
Colordance brain
ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
131 parts4Apache-2.0 - 2 layers155 × 108 mm
- 4 layers174 × 29 mm
- 2 layers69.9 × 47 mm
ModbusMSP430
penoud/ModbusMSP430
A PCB kicad project to try to setup MSP430 as slave Modbus device using MAX481 as RS232 - RS485 converter, freemodbus on sourceforge
26 parts2MIT - 4 layers149.5 × 113 mm
1. PDU
SshgurkiratSingh/CCMS_PORTAL
A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.
111 parts2