2 layers100 × 100 mm
2 layers155 × 108 mm
OpenPlc Rpi
FOSSEE/openplc_v25- Size
- 155 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 103
- Pads
- 419
- Tracks, vias
- 877, 44
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 May 2020
- Updated
- 1 Jun 2020
Overview
OpenPlc Rpi is an open-source printed circuit board by FOSSEE, from the FOSSEE/openplc_v2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 155 × 108 mm with 115 parts on 103 nets, routed with 877 tracks and 44 vias.
It is built around the MAX481EPA+, ADS1018IDGS and LTV-847, with the AMS1117-3.3, ULN2803A and B340 among its other parts. Its parts include 48 resistors, 22 diodes, 16 connectors, 9 capacitors and 8 ICs.
Main components
9
MAX481EPA+
PDIP-8-40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver ±15kV PDIP-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
ADS1018IDGS
MSOP10Ultrasmall, Low-Power, SPI™-Compatible, 12-Bit, Analog-to-Digital Converter with Internal Reference and Temperature SensorTexas InstrumentsUncategorised
LTV-847
DIP-16-30℃~+110℃ 1.2V 100mV@20mA,1mA 200mW 35V 3us 4 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor DIP-16 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
B340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
NTS245SFT1G
SOD-123FL-65℃~+150℃ 1 Independent 120uA@45V 2A 45V 50A 630mV@2A SOD-123FL Schottky Diodes ROHSonsemiSchottky Diodes
S1BB
SMB(DO-214AA)-65℃~+150℃ 1 Independent 1.1V@1A 100V 1A 30A 5uA@100V SMB(DO-214AA) Diodes - General Purpose ROHSDiodes IncorporatedDiodes - General Purpose
README
README.mdParts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 10k | fossee_openplc:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R10, R11, R12, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 +12 |
| 8 | 220R | fossee_openplc:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R33, R34, R35, R36, R37, R38, R39, R40 |
| 8 | D_Zener | fossee_openplc:D_1206_3216Metric | D1, D2, D3, D4, D7, D8, D9, D10 |
| 8 | G5LE-1 | fossee_openplc:Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 8 | LED | fossee_openplc:LED_0805_2012Metric | D11, D12, D13, D14, D15, D16, D17, D18 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R41, R42, R43, R45 |
| 4 | 5k | fossee_openplc:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R14, R15, R16 |
| 4 | Conn_01x04 | fossee_openplc:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10, J11, J12, J13 |
| 2 | 22uf | fossee_openplc:C_0805_2012Metric | C5, C6 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | 510R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R47, R48 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D21, D22 |
| 2 | LTV-847 | fossee_openplc:DIP-16_W8.89mm_SMDSocket_LongPads | U2, U3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8, J9 |
| 2 | Screw_Terminal_01x12 | fossee_openplc:TerminalBlock_Phoenix_MKDS-1,5-12-5.08_1x12_P5.08mm_Horizontal | J5, J7 |
| 2 | bergStrip_01x04_Male | fossee_openplc:bergStrip_1x04_P2.54mm_Vertical | J15, J16 |
| 2 | bergStrip_01x06_Male | fossee_openplc:bergStrip_male_1x06_P2.54mm_Vertical | J4, J6 |
| 1 | .1uf | fossee_openplc:C_0805_2012Metric | C8 |
| 1 | .33uf | fossee_openplc:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C7 |
| 1 | 1000uf | fossee_openplc:CP_Elec_10x10 | C3 |
| 1 | 100n | fossee_openplc:C_0805_2012Metric | C4 |
| 1 | 100nf | fossee_openplc:C_0805_2012Metric | C1 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R44 |
| 1 | 150uf | fossee_openplc:CP_Elec_8x10 | C2 |
| 1 | 1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 220 | fossee_openplc:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R46 |
| 1 | 680uh | fossee_openplc:L_12x12mm_H6mm | L1 |
| 1 | ADS1018IDGS | fossee_openplc:TSSOP-10_3x3mm_P0.5mm | U6 |
| 1 | AMS1117-3.3 | fossee_openplc:SOT-223-3_TabPin2 | U7 |
| 1 | B340 | fossee_openplc:D_SMC | D6 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LED_ALT | fossee_openplc:LED_0805_2012Metric | D20 |
| 1 | MAX481E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | NTS245SF | fossee_openplc:D_SMA_Handsoldering | D5 |
| 1 | Raspberry_Pi_2_3 | fossee_openplc:Raspberry_Pi_Zero_FaceUp_SingleMountingHole | J1 |
| 1 | S1BB | fossee_openplc:D_SMB | D19 |
| 1 | Screw_Terminal_01x02 | fossee_openplc:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x04 | fossee_openplc:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x10 | fossee_openplc:TerminalBlock_Phoenix_MKDS-1,5-10-5.08_1x10_P5.08mm_Horizontal | J14 |
| 1 | ULN2803A | fossee_openplc:SOIC-18W_7.5x11.6mm_P1.27mm | U8 |
| 1 | power_L7812_smd | fossee_openplc:TO-263-2 | U4 |
| 1 | power_LM2576 | fossee_openplc:TO-263-5_TabPin3 | U1 |
Questions
How big is the OpenPlc Rpi PCB?
It measures 155 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenPlc Rpi use?
115 parts, built around the MAX481EPA+, ADS1018IDGS, LTV-847 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenPlc Rpi KiCad files?
From the FOSSEE/openplc_v2 repository on GitHub, at the commit this page was made from: the board is openPlc_Rpi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenPlc Rpi design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers65 × 56 mm
- 2 layers65 × 100 mm
- 2 layers65 × 106.5 mm
- 4 layers240 × 117 mm
- 2 layers148 × 110 mm
- 2 layers57.3 × 105 mm
- 2 layers100 × 119 mm
