Skip to the content
2 layers54 × 53.3 mmController uno shield, the printed circuit board in 3D

Controller uno shield

ksmonkey123/moba31

3rd generation moba control

Size
54 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
24
Pads
116
Tracks, vias
157, 15
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 May 2021
Updated
5 Mar 2024

Overview

Controller uno shield is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/moba3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 54 × 53.3 mm with 22 parts on 24 nets, routed with 157 tracks and 15 vias.

It is built around the MAX481EPA+ and MAX489EPD+. Its parts include 9 resistors, 7 connectors, 2 ICs, 2 diodes and 1 capacitor.

Main components

2

README

README.md

moba3

3rd generation moba control

Parts

22
QtyValueFootprintReferences
410kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4
41kResistor_SMD:R_0603_1608MetricR6, R7, R8, R9
2RJ45_LED_Shieldedcustoms:RND_RJ45_LEDJ1, J2
12N7002Package_TO_SOT_SMD:SOT-23Q1
12kResistor_SMD:R_0603_1608MetricR5
1AnalogSocket_Arduino_Uno:Socket_Strip_Arduino_1x06P2
1CPCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1
1D_SchottkyDiode_SMD:D_SMAD2
1DigitalSocket_Arduino_Uno:Socket_Strip_Arduino_1x08P4
1DigitalSocket_Arduino_Uno:Socket_Strip_Arduino_1x10P3
1LEDLED_SMD:LED_0603_1608MetricD1
1MAX481EPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1MAX489EPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1PowerSocket_Arduino_Uno:Socket_Strip_Arduino_1x08P1
1Screw_Terminal_01x03Connector_Wago:Wago_734-133_1x03_P3.50mm_VerticalJ3

More from ksmonkey123/moba3

6
  • 2 layers97.5 × 67.1 mmDecoder, the printed circuit board in 3D

    Decoder

    ksmonkey123/moba3

    3rd generation moba control

    68 parts1MIT
  • 2 layers52.7 × 53.3 mmShield, the printed circuit board in 3D

    Shield

    ksmonkey123/moba3

    3rd generation moba control

    57 parts1MIT
  • 2 layers85.1 × 62.9 mmInterface, the printed circuit board in 3D

    Interface

    ksmonkey123/moba3

    3rd generation moba control

    32 parts1MIT
  • 2 layers77.7 × 45.7 mmDecoder, the printed circuit board in 3D

    Decoder

    ksmonkey123/moba3

    3rd generation moba control

    27 parts1MIT
  • 2 layers44.4 × 33.7 mmServo driver, the printed circuit board in 3D

    Servo driver

    ksmonkey123/moba3

    3rd generation moba control

    23 parts1MIT
  • 2 layers68.8 × 45.7 mmController, the printed circuit board in 3D

    Controller

    ksmonkey123/moba3

    3rd generation moba control

    21 parts1MIT

Similar boards

  • 2 layers202.3 × 150 mmNabu pizero adapter, the printed circuit board in 3D

    Nabu pizero adapter

    brijohn/nabupc

    My collection of nabu pc projects

    40 parts5
  • 2 layers155 × 108 mmOpenPlc Rpi, the printed circuit board in 3D

    OpenPlc Rpi

    FOSSEE/openplc_v2

    115 parts5MIT
  • 4 layers174 × 29 mmOneWheelBMS, the printed circuit board in 3D

    OneWheelBMS

    ocornu/OneWheelBMS

    Open source BMS for OneWheel v1/plus

    98 parts3MIT
  • 2 layers69.9 × 47 mmModbusMSP430, the printed circuit board in 3D

    ModbusMSP430

    penoud/ModbusMSP430

    A PCB kicad project to try to setup MSP430 as slave Modbus device using MAX481 as RS232 - RS485 converter, freemodbus on sourceforge

    26 parts2MIT
  • 4 layers149.5 × 113 mm1. PDU, the printed circuit board in 3D

    1. PDU

    SshgurkiratSingh/CCMS_PORTAL

    A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.

    111 parts2
  • 2 layers65 × 30 mmPool, the printed circuit board in 3D

    Pool

    jorikdima/pool

    59 parts
  • 2 layers106 × 65 mmBldc drive, the printed circuit board in 3D

    Bldc drive

    koson/BLDC-1

    BLDC motor control

    117 parts
  • 2 layers65 × 56 mmPi Hat, the printed circuit board in 3D

    Pi Hat

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    28 parts12

Questions

How big is the Controller uno shield PCB?

It measures 54 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller uno shield use?

22 parts, built around the MAX481EPA+ and MAX489EPD+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller uno shield KiCad files?

From the ksmonkey123/moba3 repository on GitHub, at the commit this page was made from: the board is pcbs/controller_uno_shield/controller_uno_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller uno shield design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).