2 layers67.3 × 20.3 mm
2 layers88.9 × 63.5 mm
Teleimperium
visgence/teleimperium- Size
- 88.9 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 71
- Pads
- 217
- Tracks, vias
- 702, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Feb 2014
- Updated
- 22 Aug 2026
Overview
Teleimperium is an open-source printed circuit board by visgence, from the visgence/teleimperium repository on GitHub. It is a 2-layer board of 88.9 × 63.5 mm with 58 parts on 71 nets, routed with 702 tracks and 36 vias.
It is built around the ATMEGA328P-AU, MAX488ESA+ and REF5040ID, with the JS202011SCQN and RJ45 among its other parts. Its parts include 14 resistors, 14 connectors, 6 capacitors, 6 ICs and 6 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX488ESA+
SO-8-40℃~+85℃ 1 1 250Kbps 32 4.75V~5.25V Transceiver SO-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICsREF5040ID
SOIC-8-40℃~+125℃@(Ta) 1.2mA 10mA 3ppm/℃ 4.096V 4.296V~18V Fixed Series ±0.05% SOIC-8 Voltage Reference ROHSTexas InstrumentsVoltage Reference
JS202011SCQN
SMD-40℃~+85℃ 300mA 5,000 cycles 5.5mm 6V DPDT Rectangular Columnar SMD(SMT) Tab Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide Switches
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.md#Teleimperium An ATmega 328 based data acquisition controller
2014 Visgence Inc.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | visgence_parts:SM0603_VIS | R2, R5, R6, R7, R8, R9, R10, R11, R13, R14, R17, R18 |
| 4 | pin | visgence_parts:1pin_C | h1, h2, h3, h4 |
| 3 | MOS_N_VIS | SMD_Packages:SOT23 | Q1, Q2, Q3 |
| 2 | 1u | visgence_parts:SM0603_Capa_VIS | C5, C6 |
| 2 | 220u | Capacitors_SMD:c_elec_6.3x7.7 | C2, C3 |
| 1 | 0.1u | visgence_parts:SM0603_Capa_VIS | C1 |
| 1 | 100 | visgence_parts:SM0603_VIS | R12 |
| 1 | 10k | visgence_parts:SM0603_VIS | R1 |
| 1 | 3.3V | LEDs:LED-0603 | D7 |
| 1 | 3.3V Reg | SMD_Packages:SOT23-5 | U3 |
| 1 | 47u | visgence_parts:SM1210L_VIS | C4 |
| 1 | 7805 | Discret:LM78XXV | U1 |
| 1 | AREF | visgence_parts:Term3.5-2 | P10 |
| 1 | ATMEGA328P-A | SMD_Packages:TQFP32 | IC1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03 | CON1 |
| 1 | Aref Jumper | Pin_Headers:Pin_Header_Straight_1x03 | J1 |
| 1 | CH1 | visgence_parts:Term3.5-4 | P1 |
| 1 | CH2 | visgence_parts:Term3.5-4 | P2 |
| 1 | CH3 | visgence_parts:Term3.5-4 | P3 |
| 1 | CH4 | visgence_parts:Term3.5-4 | P4 |
| 1 | CH5 | visgence_parts:Term3.5-4 | P5 |
| 1 | CH6 | visgence_parts:Term3.5-4 | P6 |
| 1 | FTDI | Pin_Headers:Pin_Header_Straight_1x06 | P7 |
| 1 | I2C | visgence_parts:Term3.5-4 | P8 |
| 1 | JS202011SCQN | visgence_parts:JS202011SCQN | SW1 |
| 1 | LOGO | visgence_parts:LOGO | G2 |
| 1 | LOGO | visgence_parts:LOGOMIRROR | G1 |
| 1 | MAX488 | SMD_Packages:SO8E | U4 |
| 1 | PWR | visgence_parts:Term3.5-2 | P9 |
| 1 | Power | LEDs:LED-0603 | D1 |
| 1 | REF5040 | SMD_Packages:SO8E | U5 |
| 1 | RESONATORSMD | visgence_parts:RESONATOR-SMD | Y1 |
| 1 | RJ45 | visgence_parts:RJ45_8_ASSMAN | J2 |
| 1 | RSSI | LEDs:LED-0603 | D4 |
| 1 | RX | LEDs:LED-0603 | D3 |
| 1 | SPI | visgence_parts:Term3.5-4 | P11 |
| 1 | STATUS | LEDs:LED-0603 | D6 |
| 1 | SW_PUSH | visgence_parts:TACTILE_SWITCH_SMD | SW2 |
| 1 | TX | LEDs:LED-0603 | D2 |
| 1 | XBEE | visgence_parts:XBEE-SMD | U2 |
Questions
How big is the Teleimperium PCB?
It measures 88.9 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Teleimperium use?
58 parts, built around the ATMEGA328P-AU, MAX488ESA+, REF5040ID and JS202011SCQN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teleimperium KiCad files?
From the visgence/teleimperium repository on GitHub, at the commit this page was made from: the board is teleimperium.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teleimperium design in my own project?
Its repository states no licence, so its author keeps all rights: ask visgence before reusing the design.
Similar boards
- 2 layers68.8 × 45.7 mm
- 2 layers40 × 51 mm
- 2 layers87 × 97.2 mm
HotWireRev2
AlistairCheeseman/WindTunnelApparatus
MENG Data Acquisition + motion control for Wind Tunnel Apparatus
51 partsGPL-3.0 - 2 layers129.5 × 83.5 mm
Colordance brain
ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
131 parts4Apache-2.0 - 4 layers70 × 70 mm
- 6 layers73 × 100 mm
- 4 layers49.8 × 69.1 mm
