2 layers81 × 127 mm
RPNCalcProject
aydenschmidtnd/RPNCalcProject
Due to the cost of reverse polish notation (RPN) calculators, I wanted to make the attempt at creating one myself.
103 parts1
2 layers69.9 × 47 mm
ModbusMSP430
penoud/ModbusMSP4302A PCB kicad project to try to setup MSP430 as slave Modbus device using MAX481 as RS232 - RS485 converter, freemodbus on sourceforge
- Size
- 69.9 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 26
- Pads
- 111
- Tracks, vias
- 227, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 12 Jun 2015
- Updated
- 12 Jun 2015
Overview
ModbusMSP430 is an open-source printed circuit board by penoud, from the penoud/ModbusMSP430 repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.9 × 47 mm with 26 parts on 26 nets, routed with 227 tracks and 37 vias.
It is built around the MSP430G2553IPW20, MAX481EPA+ and RJ45, with the BSS138 among its other parts. Its parts include 9 connectors, 8 capacitors, 4 ICs, 3 resistors and 1 transistor. It belongs with the interfaces and adapters boards and the MSP430 boards of this library.
Main components
4
MSP430G2553IPW20
TSSOP-20-40℃~+85℃ 1.8V~3.6V 10bit 16 16 Bit 16KB 16MHz 512Byte Built-in FLASH MSP430 CPU16 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
MAX481EPA+
PDIP-8-40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver ±15kV PDIP-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | SIL-1 | P16, P17, P18, P19 |
| 2 | 100nF | c_0805 | C5, C6 |
| 2 | 10K | SM0805 | R2, R3 |
| 2 | 10pF | c_0805 | C7, C8 |
| 2 | 10uF | c_0805 | C1, C2 |
| 2 | 22uF | c_0805 | C3, C4 |
| 2 | CONN_01X10 | SIL-10 | P1, P2 |
| 2 | RJ45 | RJ45_8 | J1, J2 |
| 1 | 100K | SM0805 | R1 |
| 1 | AZ1117C-3.3 | SOT223 | U1 |
| 1 | AZ1117C-5.0 | SOT223 | U2 |
| 1 | BSS138 | SOT23 | Q1 |
| 1 | CONN_01X04 | SIL-4 | P15 |
| 1 | CRYSTAL | SIL-2 | Y1 |
| 1 | MAX481 | DIP-8__300 | U4 |
| 1 | MSP430G2553IPW20 | DIP-20__300 | U3 |
Questions
How big is the ModbusMSP430 PCB?
It measures 69.9 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ModbusMSP430 use?
26 parts, built around the MSP430G2553IPW20, MAX481EPA+, RJ45 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ModbusMSP430 KiCad files?
From the penoud/ModbusMSP430 repository on GitHub, at the commit this page was made from: the board is ModbusMSP430.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ModbusMSP430 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
Msp430 remote
jotaemesousa/msp430_remote_kicad
Kicad files for a remote using a msp430 and a nrf24 from Nordic
22 parts1 - 2 layers24 × 24 mm
Remote temp msp430-rs422
peteEH/remote-temp-msp430-rs422
Remote Temperature Sensor Node - TMP10 - RS-422 or RS-485 based - MSP430G2553
29 parts1MIT - 2 layers
Jmotes dongle kicad
jotaemesousa/-MSP-dongle-RF24-kicad
Kicad files for a dongle to receive info from remote controller using a msp430g2553 and a nrf24l01 (nordic),
25 parts - 2 layers
- 2 layers155 × 108 mm
- 4 layers174 × 29 mm
- 4 layers149.5 × 113 mm
1. PDU
SshgurkiratSingh/CCMS_PORTAL
A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.
111 parts2