

Glider mcu
Glider using NRF24L01
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 21
- Pads
- 61
- Tracks, vias
- 239, 18
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Sep 2016
- Updated
- 28 May 2019
Overview
Glider mcu is an open-source printed circuit board by house4hack, from the house4hack/nrf-glider repository on GitHub. It is a 2-layer board with 11 parts on 21 nets, routed with 239 tracks and 18 vias.
It is built around the MSP430G2553IPW20 and 25LC640-E/P. Its parts include 3 ICs, 3 connectors and 2 resistors. It belongs with the MSP430 boards of this library.
Main components
2Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R1 |
| 1 | 25LC640 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | MSP430G2553IPW20 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
The 8 most common of 11 parts.
More from house4hack/nrf-glider
2- 2 layers45.7 × 31.8 mm

- 2 layers

Similar boards
- 2 layers85 × 94.5 mm

Digital voltages ps
zachrjt/digital-voltages-ps
Fixed 3.3V and 5V voltage power supply with voltage and current readout
79 parts2 - 2 layers94 × 55 mm

Avr basic sbc
bazsimarkus/avr-basic-sbc
An ATmega1284P-based single board computer with composite video output, PS/2 keyboard input, running Tiny BASIC.
38 parts - 2 layers130 × 105 mm

- 2 layers151 × 131 mm

- 2 layers69.9 × 47 mm

ModbusMSP430
penoud/ModbusMSP430
A PCB kicad project to try to setup MSP430 as slave Modbus device using MAX481 as RS232 - RS485 converter, freemodbus on sourceforge
26 parts2MIT - 2 layers81 × 127 mm

RPNCalcProject
aydenschmidtnd/RPNCalcProject
Due to the cost of reverse polish notation (RPN) calculators, I wanted to make the attempt at creating one myself.
103 parts1 - 2 layers

Msp430 remote
jotaemesousa/msp430_remote_kicad
Kicad files for a remote using a msp430 and a nrf24 from Nordic
22 parts1 - 2 layers24 × 24 mm

Remote temp msp430-rs422
peteEH/remote-temp-msp430-rs422
Remote Temperature Sensor Node - TMP10 - RS-422 or RS-485 based - MSP430G2553
29 parts1MIT
Questions
What parts does the Glider mcu use?
11 parts, built around the MSP430G2553IPW20 and 25LC640-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glider mcu KiCad files?
From the house4hack/nrf-glider repository on GitHub, at the commit this page was made from: the board is docs/nrf_glider/glider_mcu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glider mcu design in my own project?
Its repository states no licence, so its author keeps all rights: ask house4hack before reusing the design.