Skip to the content
2 layers52.7 × 53.3 mmShield, the printed circuit board in 3D

3rd generation moba control

Size
52.7 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
48
Pads
222
Tracks, vias
462, 48
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 May 2021
Updated
5 Mar 2024

Overview

Shield is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/moba3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 52.7 × 53.3 mm with 57 parts on 48 nets, routed with 462 tracks and 48 vias.

It is built around the ATMEGA328P-AU, ST485EBDR and EL817, with the BAT54CW among its other parts. Its parts include 26 resistors, 10 diodes, 7 connectors, 6 ICs and 4 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

moba3

3rd generation moba control

Parts

57
QtyValueFootprintReferences
10RResistor_SMD:R_0603_1608MetricR17, R18, R19, R20, R21, R22, R23, R24, R25, R26
910kResistor_SMD:R_0603_1608MetricR1, R2, R5, R7, R8, R9, R10, R12, R15
8LEDLED_SMD:LED_0603_1608MetricD3, D4, D5, D6, D7, D8, D9, D10
71kResistor_SMD:R_0603_1608MetricR3, R4, R6, R11, R13, R14, R16
4ST485EBDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3, U4, U5, U6
2100nFCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC3, C4
210pFCapacitor_SMD:C_0603_1608MetricC1, C2
22N7002Package_TO_SOT_SMD:SOT-23Q1, Q2
2AVR-ISP-6Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ1, J2
2BAT54CWPackage_TO_SOT_SMD:SOT-23D1, D2
116MHzCrystal:Crystal_HC49-4H_VerticalY1
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1AnalogSocket_Arduino_Uno:Socket_Strip_Arduino_1x06P2
1DigitalSocket_Arduino_Uno:Socket_Strip_Arduino_1x08P4
1DigitalSocket_Arduino_Uno:Socket_Strip_Arduino_1x10P3
1EL817Package_DIP:DIP-4_W7.62mmU2
1PowerSocket_Arduino_Uno:Socket_Strip_Arduino_1x08P1
1RJ45_LEDcustoms:RND_RJ45_LEDJ3
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

More from ksmonkey123/moba3

6
  • 2 layers97.5 × 67.1 mmDecoder, the printed circuit board in 3D

    Decoder

    ksmonkey123/moba3

    3rd generation moba control

    68 parts1MIT
  • 2 layers85.1 × 62.9 mmInterface, the printed circuit board in 3D

    Interface

    ksmonkey123/moba3

    3rd generation moba control

    32 parts1MIT
  • 2 layers77.7 × 45.7 mmDecoder, the printed circuit board in 3D

    Decoder

    ksmonkey123/moba3

    3rd generation moba control

    27 parts1MIT
  • 2 layers44.4 × 33.7 mmServo driver, the printed circuit board in 3D

    Servo driver

    ksmonkey123/moba3

    3rd generation moba control

    23 parts1MIT
  • 2 layers68.8 × 45.7 mmController, the printed circuit board in 3D

    Controller

    ksmonkey123/moba3

    3rd generation moba control

    21 parts1MIT

Similar boards

  • 2 layers100 × 90 mmNano5, the printed circuit board in 3D

    Nano5

    RJLABS/flatcracker

    tempalate board

    187 partsAGPL-3.0
  • 2 layers92.5 × 21 mmWindow sensor, the printed circuit board in 3D

    Window sensor

    judos/pcb_window_sensor

    22 parts
  • 2 layers60 × 92 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    83 parts23MIT
  • 2 layers30 × 54 mmUsb to rs485 over rj45, the printed circuit board in 3D

    Usb to rs485 over rj45

    aruna-rov/usb_to_rs485_over_rj45

    usb to rs485 over rj45

    24 parts4GPL-3.0
  • 4 layers136.1 × 70.6 mmMppt, the printed circuit board in 3D

    Mppt

    seandepagnier/mppt

    free software/hardware mppt solar controller

    152 parts4
  • 2 layers99.1 × 99.1 mmCnc, the printed circuit board in 3D

    Cnc

    romanchom/cnc-pcb

    PCB designed for use with GRBL ESP32 as a CNC controller.

    54 parts1
  • 2 layers290 × 221 mmHub module, the printed circuit board in 3D

    Hub module

    tmolteno/TART-3

    The TART radio telescope, Version 3.

    280 parts1GPL-3.0

Questions

How big is the Shield PCB?

It measures 52.7 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shield use?

57 parts, built around the ATMEGA328P-AU, ST485EBDR, EL817 and BAT54CW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shield KiCad files?

From the ksmonkey123/moba3 repository on GitHub, at the commit this page was made from: the board is pcbs/programming_shield/shield/shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shield design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).