Skip to the content

Boards by jspark311

12 boards

Open-source boards designed in KiCad by jspark311 on GitHub, from 11 repositories. A board’s address here is its repository’s there.

  • 4 layers42.7 × 32.5 mmSX8634-Breakout, the printed circuit board in 3D

    SX8634-Breakout

    jspark311/SX8634-Breakout

    The repository for the SX8634 breakout board

    9 parts11MIT
  • 2 layers21.8 × 27.2 mmMCP3564-Breakout, the printed circuit board in 3D

    MCP3564-Breakout

    jspark311/MCP356x-Breakout

    A breakout board for Microchip's 24-bit SPI ADC. The MCP3564 is a 24-bit sigma-delta ADC with support for up to eight single-ended, or four differential channels.

    29 parts5
  • 2 layers16.5 × 31.8 mmSX1503-Breakout, the printed circuit board in 3D

    SX1503-Breakout

    jspark311/SX1503-Breakout

    A breakout board for the Semtech i2c GPIO expander. The SX1503 is an i2c GPIO expander with support for 16 extra pins, 2 voltage translation banks, and a simple PLD capability.

    6 parts3
  • 4 layers97.5 × 70.6 mmBasic Connector Board, the printed circuit board in 3D

    Basic Connector Board

    jspark311/ViamSonus-2.0

    An audio router board with integrated volume control and buffered output.

    88 parts3
  • 2 layers18.8 × 36.6 mmADG2128-Breakout, the printed circuit board in 3D

    ADG2128-Breakout

    jspark311/ADG2128-Breakout

    A breakout board for Analog Devices' 8x12 analog cross-point switch

    10 parts1
  • 2 layers19.1 × 27.3 mmADP8866-Breakout, the printed circuit board in 3D

    ADP8866-Breakout

    jspark311/ADP8866-Breakout

    A breakout board for the ADP8866 LED PMIC.

    7 parts1Apache-2.0
  • 2 layersAudioSwitch, the printed circuit board in 3D

    AudioSwitch

    jspark311/ViamSonus-1.1

    This is the integration of the r0 ViamSonus PCB into a finished unit.

    14 parts1GPL-2.0
  • 2 layers18.8 × 16.3 mmDS1881-Breakout, the printed circuit board in 3D

    DS1881-Breakout

    jspark311/DS1881-Breakout

    A breakout board for the Dallas/Maxim i2c logarithmic potentiometer

    8 parts
  • 4 layers21.6 × 31.8 mmDeadband Sequencer, the printed circuit board in 3D

    Deadband Sequencer

    jspark311/H-bridge-deadband-sequencer

    22 partsApache-2.0
  • 2 layers50.8 × 24.6 mmRadioRelay, the printed circuit board in 3D

    RadioRelay

    jspark311/Lux-Turpis

    An ISM radio relay built on top of the Olimex ESP32 Gateway board

    8 partsApache-2.0
  • 2 layers13.7 × 16.3 mmMCP4728-Breakout, the printed circuit board in 3D

    MCP4728-Breakout

    jspark311/MCP4728-Breakout

    A breakout for the Microchip i2c 4-channel DAC

    5 parts
  • 4 layers39.1 × 36.6 mmRouter Board, the printed circuit board in 3D

    Router Board

    jspark311/ViamSonus-2.0

    An audio router board with integrated volume control and buffered output.

    41 parts3