
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

A breakout board for Microchip's 24-bit SPI ADC. The MCP3564 is a 24-bit sigma-delta ADC with support for up to eight single-ended, or four differential channels.
MCP3564-Breakout is an open-source printed circuit board by jspark311, from the jspark311/MCP356x-Breakout repository on GitHub. It is a 2-layer board of 21.8 × 27.2 mm with 29 parts on 31 nets, routed with 226 tracks and 23 vias.
Its parts include 15 capacitors, 10 resistors, 2 ICs and 2 connectors. It belongs with the interfaces and adapters boards of this library.
A breakout board for Microchip's 24-bit SPI ADC. The MCP3564 is a 24-bit sigma-delta ADC with support for up to eight single-ended, or four differential channels. It supports extensive oversampling depths, flexible MUX front-end, circuit burnout detection, adjustable gain, Vref from [0v - 3.6v], and optional internal oscillator.
./doc: Location for documentation
./KiCAD: Hardware design files
./Arduino: Arduino driver
| Front (With OSC) | Back (With OSC) |
|---|---|
![]() | ![]() |
| Front (No OSC) | Back (No OSC) |
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C0, C1, C2, C3, C4, C5, C6, C7, C11, C12 |
| 10 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R0, R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10, C13, C14 |
| 2 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J3 |
| 1 | 19.6608MHz OSC | Oscillator:Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm | U2 |
| 1 | MCP3964 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm_ThermalVias | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 21.8 × 27.2 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jspark311/MCP356x-Breakout repository on GitHub, at the commit this page was made from: the board is KiCAD/WithOSC/MCP3564-Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jspark311 before reusing the design.