
LoRa
eugeniobaglieri/LoRa1276-breakout-board
KiCad schematics and pcb of a breakout board adapter for Nicerf Lora1276 V2.0 - module.

An ISM radio relay built on top of the Olimex ESP32 Gateway board
RadioRelay is an open-source printed circuit board by jspark311, from the jspark311/Lux-Turpis repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50.8 × 24.6 mm with 8 parts on 30 nets, routed with 74 tracks and 7 vias.
It is built around the LORA1276-915. Its parts include 4 connectors, 1 capacitor and 1 IC. It belongs with the radio and wireless and home automation and IoT boards of this library.
Lux Turpis is an ISM radio relay. The hardware is a one-off multi-platform system that is mounted to an antenna mast. You can try to replicate it if you like, but it is being posted more as a demonstration and documentation piece, rather than as a usable body of code and hardware plans.
./doc: Documentation related to this project.
./lib: External dependencies.
./src: Original (unless otherwise specified) source code.
Original code is Apache 2.0.
Code adapted from others' work inherits their license terms, which were preserved in the commentary where it applies.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | r2Parts:CapArray_CKCL44 | CARY1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | CONN_01X01 | r2Parts:ManuvrLogo | P1 |
| 1 | Conn_01x20 | OLIMEX_Connectors-FP:HN1x20 | CON1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | LORA1276 | RadioRelay:LORA1276-Module | U1 |
| 1 | Mounting_hole_Shield_3.3mm | OLIMEX_Other-FP:Mounting_hole_Shield_3.3mm | MH1 |

eugeniobaglieri/LoRa1276-breakout-board
KiCad schematics and pcb of a breakout board adapter for Nicerf Lora1276 V2.0 - module.


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
It measures 50.8 × 24.6 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the LORA1276-915. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jspark311/Lux-Turpis repository on GitHub, at the commit this page was made from: the board is KiCAD/RadioRelay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).