Boards by jenschr

11 boards

Open-source boards designed in KiCad by jenschr on GitHub, from 8 repositories. A board’s address here is its repository’s there.

2 layers33 × 20 mm
USB C Power tester
jenschr/USB-C-Connectors
Various cheap USB-C connectors from LCSC for KiCad
11 parts147Unlicense
2 layers50.8 × 22.9 mm
FeatherWing
jenschr/FeatherWing
A bare Feather Wing project for Kicad
6 parts8MIT
4 layers22.9 × 50.8 mm
ESP32 S2 MINI 1
jenschr/LectureFeather
A Feather dev board based on ESP32-S2
50 parts7
2 layers45 × 34 mm
TeensyTest
jenschr/Teensy3.2-example
A verified example PCB based on the Teensy 3.2 schematics
32 parts5MIT
2 layers39.4 × 16.2 mm
X14 dev
jenschr/ATTinyX14-development-board
Tiny breadboard compatible development board based on either ATTiny414, ATTiny814 or ATTiny1614
23 parts2MIT
2 layers49.8 × 68.5 mm
Dumper001
jenschr/WifiRc
Can run off USB (no motor) or 7.4 or 11.1V batteries (depending on what your motors need). Set your power source using the VS jumper. The 5V outputs are intended to dirve Servo's, but the wiring isn't exactly ideal.
46 parts2
2 layers30.5 × 48.3 mm
ESP32 CP2102
jenschr/ESP32-workshop-files
Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.
32 parts1MIT
2 layers50.8 × 22.9 mm
FeatherShifter
jenschr/NeoPixelWing
Simple FeatherWing for controlling two strands of NeoPixels
19 parts
2 layers33 × 23 mm
USB C USB-2.0
jenschr/USB-C-Connectors
Various cheap USB-C connectors from LCSC for KiCad
11 parts147Unlicense
2 layers45 × 26 mm
USB C USB-3.2
jenschr/USB-C-Connectors
Various cheap USB-C connectors from LCSC for KiCad
7 parts147Unlicense
2 layers28 × 28 mm
ESP32 S2 MINI 1
jenschr/ESP32-workshop-files
Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.
23 parts1MIT