
ESP32 S2 MINI 1
jenschr/ESP32-workshop-files
Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.

Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.
ESP32 CP2102 is an open-source printed circuit board by jenschr, from the jenschr/ESP32-workshop-files repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.5 × 48.3 mm with 32 parts on 71 nets, routed with 373 tracks and 37 vias.
It is built around the AMS1117-3.3, RMCF0603JG10K0 and BC817, with the KMR241GLFS among its other parts. Its parts include 14 resistors, 7 capacitors, 3 ICs, 3 connectors and 2 transistors. It belongs with the ESP32 boards of this library.
Kicad files from my two-day workshop at Bitraf on creating an ESP32 based IoT device from scratch. In the Workshop, attendees will be making an IoT device from scratch using the Open Source EDA software Kicad. Slides from the workshop can be found at my Slideshare account.
In the workshop, we'll create our own boards from scratch, but we found that it's convenient to have a project to compare and check things against. In the workshop, the attendees can choose to use either the ESP32 S2/S3 Mini or the ESP32 Wroom 32E modules. The latter requires the use of a serial chip such as the CP2102/04 and this tested design has the required auto-program circuitry.
Having a devboard is fun, but having some builtin input and output is even better, so for the attendees that don't have a plan, I've suggested to add an APA102 Dotstar pixel as well as a simple NTC-based temperature sensor. The circuit for these two are in the files for the S2/S3 Mini.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C102, C103, C104, C105, C107 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R103, R109, R110 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R107, R108 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R113, R114 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C101, C106 |
| 2 | 33R | Resistor_SMD:R_0603_1608Metric | R104, R105 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R101, R102 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q101, Q102 |
| 2 | Conn_01x14 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J102, J103 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric | R111, R112 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R106 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U101 |
| 1 | BOOT | ToyTronics:KMR241GLFS | BOOT101 |
| 1 | CP2102N-A01-GQFN24_mod | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U103 |
| 1 | EN | ToyTronics:KMR241GLFS | EN101 |
| 1 | ESP32-WROOM-E | Espressif:ESP32-WROOM-32E | U102 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | USB_C_Receptacle_USB2.0 | USB-C-Power-tester:TYPE-C-31-M-12 | J101 |

jenschr/ESP32-workshop-files
Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.



hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

fubiniricci/NOVA-S3
A 40 × 30 mm, two-layer ESP32-S3 development board, designed and generated programmatically from the official KiCad libraries with a custom grid-based auto-router.

Wierdwizard2587/Custom-Teensy-4.1-PCB-Design
Custom Designed MCU design based upon Teensy 4.1



It measures 30.5 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the AMS1117-3.3, RMCF0603JG10K0, BC817 and KMR241GLFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jenschr/ESP32-workshop-files repository on GitHub, at the commit this page was made from: the board is ESP32_CP2102/ESP32_CP2102.kicad_pcb and its schematic ESP32_CP2102/ESP32_CP2102.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).