4 layers85 × 55 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
29 parts2
52 × 18 mm
Device
jayis1/hacker-devices2Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
- Size
- 52 × 18 mm
- Copper layers
- 0
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 68
- Pads
- 110
- Tracks, vias
- 0, 0
- Pours
- 3
- Routed
- Not yet
- KiCad
- KiCad 7.0 (file 20230121)
- Created
- 12 Jun 2026
- Updated
- 6 Nov 2026
Overview
Device is an open-source printed circuit board by jayis1, from the jayis1/hacker-devices repository on GitHub. It is a board of 52 × 18 mm with 17 parts on 68 nets.
It is built around the STM32G474CEU6, FUSB302BMPX and ISO1540D. Its parts include 9 ICs, 3 connectors, 1 diode, 1 transistor and 1 switch. It belongs with the STM32 boards of this library.
Main components
3
STM32G474CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 38 512KB ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
FUSB302BMPX
WFQFN-14(2.5x2.5)-40℃~+125℃ 2.8V~5.5V 25uA Controller USB 3.1 WFQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB Converters
ISO1540D
SOIC-8-40℃~+125℃ 2500 50kV/us Bidirectional Bidirectional automatic direction、Open-drain buffer output SOIC-8 I2C Isolators ROHSTexas InstrumentsI2C Isolators
README
README.mdHacker Devices — Open Hardware for Security Research
A collection of fully open-source hardware designs for legitimate security research and pentesting. Every device is complete end-to-end: engineering docs, KiCad schematics & PCB layouts, production C/Python firmware, and React Native companion apps. Build it, flash it, run the app, start researching.
What's Inside Every Device
No half-finished reference designs. Each device folder contains the full stack:
| Category | Files | Description |
|---|---|---|
| Engineering Docs | phase1_conceptual_architecture.md → phase4_software_stack.md | 4-phase design process: requirements, BOM & netlists, PCB layout rules, software stack |
| KiCad Schematics | kicad/*.kicad_pro, *.kicad_sch, *.kicad_pcb | Full schematic with real component symbols, net labels, power flags, and board outline with placed footprints |
| C/Python Firmware | firmware/main.c, registers.h, board.h, drivers/, Makefile | Production-quality MCU firmware — init code, drivers with DMA, USB descriptors, wire protocol |
| React Native App | app/App.js, screens/, components/, utils/protocol.js, package.json | Companion mobile app for device control, configuration, real-time status, and data capture |
Design Methodology
Every device follows a rigorous 4-phase process:
| Phase | Document | Contents |
|---|---|---|
| Phase 1 | phase1_conceptual_architecture.md | Purpose, performance targets, constraints, block diagram, bus topology, power domains |
| Phase 2 | phase2_component_selection_schematics.md | BOM with real part numbers, pinouts/MUX tables, decoupling networks, netlists, impedance matching |
| Phase 3 | phase3_pcb_blueprints_layout.md | PCB stackup, routing rules, length matching, via strategy, thermal management, DFM notes |
| Phase 4 | phase4_software_stack.md | MMIO/register defs, clock & GPIO init (production C), critical device driver, device tree, bootloader |
Devices
| # | Device | Status | Description |
|---|---|---|---|
| 1 | wifi-pentest-dongle/ | ✅ Complete | 802.11ax monitor/inject, deauth, PMKID capture |
| 2 | rf-transceiver-tool/ | ✅ Complete | Sub-GHz + 2.4GHz multi-protocol (CC1101 + nRF24) |
| 3 | badusb-injector | ⏳ Queued | HID emulation payload injector, multi-profile |
| 4 | nfc-rfid-cloner | ⏳ Queued | 13.56MHz + 125kHz, Mifare/EM4100 |
| 5 | network-tap-mitm | ⏳ Queued | 2× GbE transparent bridge, packet capture |
| 6 | can-bus-analyzer | ⏳ Queued | OBD-II + CAN-FD, automotive pentest |
| 7 | sdr-keyfob-replay | ⏳ Queued | 433/315MHz keyfob capture & replay |
| 8 | ble-sniffer-spoofer | ⏳ Queued | nRF52, advertisement inject, GATT fuzz |
| 9 | imsi-catcher-detector | ⏳ Queued | LTE/4G SDR analysis |
| 10 | biometric-bypass-toolkit | ⏳ Queued | Fingerprint emulation, RFID clone for access control |
Constraints
- BOM target: Under $100 per device
- Form factor: Portable, USB-powered or battery-operated
- All designs use real, purchasable components with exact part numbers
- KiCad schematics are valid KiCad 7+ format — open them directly
- Firmware is production-quality C — not stubs or pseudocode
- React Native apps have working UI with proper state management and wire protocol matching the firmware
License
| Component | License |
|---|---|
| Hardware design (KiCad) | CERN-OHL-S v2 |
| C firmware & drivers | GPL-2.0 |
| Python tools & scripts | MIT |
| React Native companion apps | MIT |
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | FUSB302BMPX | Package_DFN_QFN:QFN-14-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U2, U3 |
| 2 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U7, U8 |
| 1 | 100uF 50V | Capacitor_SMD:CP_Elec_6.3x7.7 | C_BULK |
| 1 | 5mR 1% 3W | Resistor_SMD:R_2512_6332Metric | R_SHUNT1 |
| 1 | IPK95N04L | Package_TO_SOT_SMD:TO-263-3_TabPin2 | Q1 |
| 1 | ISO1540 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | LM5180-1W | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | MAX5370 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | Mode/Hard-Reset button | Button_Switch_SMD:SW_SPST_B3SN-6x6 | SW1 |
| 1 | Pogo SWD debug | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J3 |
| 1 | STM32G474CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U1 |
| 1 | Status RGB LED | LED_SMD:LED_RGB_1210 | D1 |
| 1 | TPS25940 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm | U5 |
| 1 | USB-C Plug (victim/DUT) | Connector_USB:USB_C_Plug_Molex_105444 | J1 |
| 1 | USB-C Receptacle (source/host) | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J2 |
Questions
How big is the Device PCB?
It measures 52 × 18 mm, 1.6 mm thick.
What parts does the Device use?
17 parts, built around the STM32G474CEU6, FUSB302BMPX and ISO1540D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Device KiCad files?
From the jayis1/hacker-devices repository on GitHub, at the commit this page was made from: the board is cc-stiletto/kicad/device.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Device design in my own project?
Its repository states no licence, so its author keeps all rights: ask jayis1 before reusing the design.
More from jayis1/hacker-devices
12- 70 × 40 mm
Silent symphony
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
27 parts2 - 4 layers65 × 30 mm
Chronos phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
26 parts2 - 4 layers70 × 45 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
25 parts2 - 4 layers85 × 24 mm
Trace reaper
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
24 parts2 - 4 layers86 × 55 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
22 parts2 - 4 layers120 × 22 mm
Acoustic phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 4 layers80 × 40 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 4 layers85 × 54 mm
Rf transceiver tool
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 2 layers118 × 68 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
19 parts2 - 4 layers50 × 24 mm
Ghostbus
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
18 parts2 - 4 layers22 × 18 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
18 parts2
Similar boards
- 6 layers56 × 56 mm
- 4 layers30 × 18 mm
- 4 layers90 × 50 mm
- 6 layers56.7 × 54.7 mm
Better md80
darshp848/bldc-controller-60v
60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.
144 parts1 - 4 layers67.4 × 67.4 mm
SCLF Gripper
Tknika-SCLF/sclf-gripper
Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.
78 parts1 - 4 layers
- 4 layers
- 4 layers100 × 56 mm
