Skip to the content
4 layers120 × 22 mmAcoustic phantom, the printed circuit board in 3D

Acoustic phantom

jayis1/hacker-devices2

Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

Size
120 × 22 mm
Copper layers
4
Thickness
1.6 mm
Parts
20
Nets
82
Pads
107
Tracks, vias
7, 6
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20240101)
Created
12 Jun 2026
Updated
6 Nov 2026

Overview

Acoustic phantom is an open-source printed circuit board by jayis1, from the jayis1/hacker-devices repository on GitHub. It is a 4-layer board of 120 × 22 mm with 20 parts on 82 nets, routed with 7 tracks and 6 vias.

It is built around the STM32H743VIT6, W25Q128JVSIQ and WM8904CGEFL/V, with the BQ25895RTW, TPS63031DSK and SPH0641LU4H-1 among its other parts. Its parts include 8 ICs, 4 connectors, 3 switches and 1 diode. It belongs with the STM32 boards of this library.

Main components

7

README

README.md

Hacker Devices — Open Hardware for Security Research

A collection of fully open-source hardware designs for legitimate security research and pentesting. Every device is complete end-to-end: engineering docs, KiCad schematics & PCB layouts, production C/Python firmware, and React Native companion apps. Build it, flash it, run the app, start researching.

What's Inside Every Device

No half-finished reference designs. Each device folder contains the full stack:

CategoryFilesDescription
Engineering Docsphase1_conceptual_architecture.md → phase4_software_stack.md4-phase design process: requirements, BOM & netlists, PCB layout rules, software stack
KiCad Schematicskicad/*.kicad_pro, *.kicad_sch, *.kicad_pcbFull schematic with real component symbols, net labels, power flags, and board outline with placed footprints
C/Python Firmwarefirmware/main.c, registers.h, board.h, drivers/, MakefileProduction-quality MCU firmware — init code, drivers with DMA, USB descriptors, wire protocol
React Native Appapp/App.js, screens/, components/, utils/protocol.js, package.jsonCompanion mobile app for device control, configuration, real-time status, and data capture

Design Methodology

Every device follows a rigorous 4-phase process:

PhaseDocumentContents
Phase 1phase1_conceptual_architecture.mdPurpose, performance targets, constraints, block diagram, bus topology, power domains
Phase 2phase2_component_selection_schematics.mdBOM with real part numbers, pinouts/MUX tables, decoupling networks, netlists, impedance matching
Phase 3phase3_pcb_blueprints_layout.mdPCB stackup, routing rules, length matching, via strategy, thermal management, DFM notes
Phase 4phase4_software_stack.mdMMIO/register defs, clock & GPIO init (production C), critical device driver, device tree, bootloader

Devices

#DeviceStatusDescription
1wifi-pentest-dongle/✅ Complete802.11ax monitor/inject, deauth, PMKID capture
2rf-transceiver-tool/✅ CompleteSub-GHz + 2.4GHz multi-protocol (CC1101 + nRF24)
3badusb-injector⏳ QueuedHID emulation payload injector, multi-profile
4nfc-rfid-cloner⏳ Queued13.56MHz + 125kHz, Mifare/EM4100
5network-tap-mitm⏳ Queued2× GbE transparent bridge, packet capture
6can-bus-analyzer⏳ QueuedOBD-II + CAN-FD, automotive pentest
7sdr-keyfob-replay⏳ Queued433/315MHz keyfob capture & replay
8ble-sniffer-spoofer⏳ QueuednRF52, advertisement inject, GATT fuzz
9imsi-catcher-detector⏳ QueuedLTE/4G SDR analysis
10biometric-bypass-toolkit⏳ QueuedFingerprint emulation, RFID clone for access control

Constraints

  • BOM target: Under $100 per device
  • Form factor: Portable, USB-powered or battery-operated
  • All designs use real, purchasable components with exact part numbers
  • KiCad schematics are valid KiCad 7+ format — open them directly
  • Firmware is production-quality C — not stubs or pseudocode
  • React Native apps have working UI with proper state management and wire protocol matching the firmware

License

ComponentLicense
Hardware design (KiCad)CERN-OHL-S v2
C firmware & driversGPL-2.0
Python tools & scriptsMIT
React Native companion appsMIT

Parts

20
QtyValueFootprintReferences
4SPH0641LU4H-1jayis1:SPH0641LU4H-1MK1, MK2, MK3, MK4
1AD8233ACPZPackage_CSP:LFCSP-20-1EP_4x4mm_P0.5mmU3
1ARMButton_Switch_SMD:SW_SPST_TL3305ASW3
1BQ25895RTWPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mmU6
1CYW20819jayis1:CYW20819-XXBZU4
1JST-PH-2Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ4
1LIS2DH12TRPackage_LGA:LGA-12_2x2mm_P0.5mmU9
1MicroSDConnector_Card:microSD_HC_Hirose_DM3D-SFJ3
1POWERButton_Switch_SMD:SW_SPST_TL3305ASW1
1PROFILEButton_Switch_SMD:SW_SPST_TL3305ASW2
1PZT-5H-20mmjayis1:Piezo-Jack-3.5mmJ2
1STM32H743VIT6Package_QFP:LQFP-100_14x14mm_P0.5mmU1
1TPS63031Package_SON:VSON-10-1EP_3x3mm_P0.5mmU7
1USB-C-16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1W25Q128JVSIQPackage_SO:SOIC-8_5.27x5.24mm_P1.27mmU5
1WM8904CGEFLPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mmU2
1WS2812BLED_SMD:LED_WS2812B-PLCC4D1

More from jayis1/hacker-devices

12
  • 4 layers85 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    29 parts2
  • 70 × 40 mmSilent symphony, the printed circuit board in 3D

    Silent symphony

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    27 parts2
  • 4 layers65 × 30 mmChronos phantom, the printed circuit board in 3D

    Chronos phantom

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    26 parts2
  • 4 layers70 × 45 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    25 parts2
  • 4 layers85 × 24 mmTrace reaper, the printed circuit board in 3D

    Trace reaper

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    24 parts2
  • 4 layers86 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    22 parts2
  • 4 layers80 × 40 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    20 parts2
  • 4 layers85 × 54 mmRf transceiver tool, the printed circuit board in 3D

    Rf transceiver tool

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    20 parts2
  • 2 layers118 × 68 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    19 parts2
  • 4 layers50 × 24 mmGhostbus, the printed circuit board in 3D

    Ghostbus

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    18 parts2
  • 4 layers22 × 18 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    18 parts2
  • 35 × 20 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    18 parts2

Similar boards

  • 2 layers90 × 60 mmStridophone, the printed circuit board in 3D

    Stridophone

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    18 parts
  • 4 layers45.2 × 41.2 mmMCU Board 0.3, the printed circuit board in 3D

    MCU Board 0.3

    thejamesrhodes/Hyades-Flight-Computer

    Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket

    120 parts1Apache-2.0
  • 4 layers60 × 60 mmWeek1, the printed circuit board in 3D

    Week1

    DVeldhurthi/halflifeweek1

    Half Life Week 1: Design PCB

    77 parts
  • 6 layers40 × 40 mmKestrel fc, the printed circuit board in 3D

    Kestrel fc

    HeyPCB/kestrel-fc

    Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.

    114 partsCERN-OHL-S-2.0
  • 4 layers46 × 186 mmM3 assy r1, the printed circuit board in 3D

    M3 assy r1

    OAK-WJR/rocket-flight-computer

    Amateur rocket flight computer: single-board KiCad PCB (STM32H743), firmware and diagnostics

    135 parts
  • 2 layers100 × 70 mmHipbadge, the printed circuit board in 3D

    Hipbadge

    sneurlax/hip-badge

    And join our matrix discussion channel: https://matrix.to/#/#hipbadge:matrix.org

    199 parts1
  • 2 layers21 × 31.5 mmESP32Camera, the printed circuit board in 3D

    ESP32Camera

    wasa-rockoon/WOBC

    WASAロケットプロジェクト 共通電装基盤

    40 parts1MIT
  • 4 layers54.7 × 78.5 mmDisplayModule PONSv71, the printed circuit board in 3D

    DisplayModule PONSv71

    MasaoC/GPS-TFT-Map_PONS

    鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。

    151 parts14MIT

Questions

How big is the Acoustic phantom PCB?

It measures 120 × 22 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Acoustic phantom use?

20 parts, built around the STM32H743VIT6, W25Q128JVSIQ, WM8904CGEFL/V and BQ25895RTW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Acoustic phantom KiCad files?

From the jayis1/hacker-devices repository on GitHub, at the commit this page was made from: the board is acoustic-phantom/kicad/acoustic-phantom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Acoustic phantom design in my own project?

Its repository states no licence, so its author keeps all rights: ask jayis1 before reusing the design.