4 layers101 × 175 mm
2 layers120 × 93 mm
DRILLTEAMYMchanges
ICRS/IPRL-Electronics-Hardware1- Size
- 120 × 93 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 76
- Pads
- 265
- Tracks, vias
- 633, 34
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Dec 2024
- Updated
- 5 Feb 2026
Overview
DRILLTEAMYMchanges is an open-source printed circuit board by ICRS, from the ICRS/IPRL-Electronics-Hardware repository on GitHub. It is a 2-layer board of 120 × 93 mm with 67 parts on 76 nets, routed with 633 tracks and 34 vias.
It is built around the HX711, S8550 and XT60-M. Its parts include 24 resistors, 21 capacitors, 11 connectors, 4 ICs and 3 transistors.
Main components
3
HX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)
S8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)XT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorised
README
README.mdIPRL-Electronics-Hardware
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C17, C19, C20, C23, C24, C25, C27, C35, C37 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric | R16, R17, R20, R21, R28, R29 |
| 6 | Conn_01x04 | 430450400:MOLEX_430450400 | J1, J2, J6, J9, J12, J14 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6, R26, R27 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10, C11 |
| 4 | 1K7 | Resistor_SMD:R_0805_2012Metric | R7, R9, R11, R13 |
| 4 | 3K3 | Resistor_SMD:R_0805_2012Metric | R8, R10, R12, R14 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C6, C28, C38 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C16, C26, C36 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric | R19, R22, R30 |
| 3 | 470 | Resistor_SMD:R_0805_2012Metric | R18, R23, R31 |
| 3 | HX711 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U4, U6, U7 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 3 | S8550 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 2 | Conn_01x08 | 430450800:MOLEX_430450800 | J11, J15 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J10 |
| 1 | Conn_01x03 | 430450400:MOLEX_430450400 | J3 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | XT60-M | XT60-M:AMASS_XT60-M | J5 |
| 1 | ~ | Z:Z_ESP32_DevKitC_38pin_socket | U1 |
Questions
How big is the DRILLTEAMYMchanges PCB?
It measures 120 × 93 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRILLTEAMYMchanges use?
67 parts, built around the HX711, S8550 and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRILLTEAMYMchanges KiCad files?
From the ICRS/IPRL-Electronics-Hardware repository on GitHub, at the commit this page was made from: the board is PCBs/DRILLTEAM/DRILLTEAMYMchanges.kicad_pcb and its schematic PCBs/Arm Schematic V2/Arm Schematic V2/Arm Schematic V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRILLTEAMYMchanges design in my own project?
Its repository states no licence, so its author keeps all rights: ask ICRS before reusing the design.
More from ICRS/IPRL-Electronics-Hardware
12- 2 layers100 × 80 mm
- 2 layers100 × 100 mm
- 4 layers90 × 70 mm
- 2 layers100 × 72 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers100 × 80.1 mm
- 2 layers80 × 80 mm
- 2 layers48.5 × 99.8 mm
- 2 layers100 × 60 mm
- 2 layers23 × 23 mm
Similar boards
- 2 layers128 × 77 mm
- 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers47 × 47 mm
- 2 layers101.5 × 61.6 mm
- 4 layers101 × 101 mm
Esp32
jenna2004jna/ESP32-S3-WROOM-1-Custom-PCB-Design
This project presents a custom-designed PCB based on the ESP32-S3-WROOM-1 module, developed for embedded and IoT applications requiring reliable wireless communication, compact layout, and efficient power management.
124 parts1 - 2 layers71.5 × 43.3 mm
- 2 layers100.3 × 75.5 mm
- 2 layers65 × 41.5 mm
Pi HAT
Montso/Pi-HAT
KiCAD files of a RPi HAT built for weight data acquistion and actuation of the specimen lift platform.
92 parts