
Esp32p4 extreme
Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.

Coffee scale project for ECET 430
Coffee scale is an open-source printed circuit board by BTrujillo816, from the BTrujillo816/coffee-scale repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 71.5 × 43.3 mm with 56 parts on 72 nets, routed with 384 tracks and 64 vias.
It is built around the ESP32-S3-WROOM-1-N16, HX711 and AP2112R5-3.3TRG1, with the BSS138, DMG2301L-7(ES) and S8550 among its other parts. Its parts include 13 resistors, 11 capacitors, 4 ICs, 4 connectors and 3 diodes. It belongs with the ESP32 boards of this library.
This is a project for NJIT's ECET 430 - Electronics Manufacturing class.
This digital coffee scale will display weight measurements, flow rate, and include a built-in timer. It will also be able to send brew parameters through WiFi or Bluetooth to an App or other interface.
hardware KiCad project with schematic, pcb layout, plots, drawingssoftware ESP32 firmware and Arduino IDE setupdocumentation Technical documentation and user manuallogbook Markdown files for progress updatesSee the user documentation.
See the design decision document.
This project was made possible by borrowing from great designs, including:
Written by Brandon Trujillo and Miguel Takinan, 2024
This work is available under the Creative Commons Attribution-ShareAlike License 4.0. A local copy is available at LICENSE.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 5 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8 |
| 4 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R9, R10 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2, SW3 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C9 |
| 2 | 20p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 10uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | AP2112/RT9080-3.3 | Package_TO_SOT_SMD:SOT-89-5_Handsoldering | U4 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | DMG3415U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D_Schottky_Filled | Diode_SMD:D_SOD-128 | D4 |
| 1 | ESP32-S3 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | MCP73832-5-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | S8550 | Package_TO_SOT_SMD:SOT-23-3 | Q2 |
| 1 | Speaker | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | LS1 |
| 1 | TestPoint_Small | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6 |
| 1 | USB C | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | ~ | Diode_SMD:D_SOD-128 | D1 |

Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.


szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,


EhlOps/mini-dyno
The mini dyno (dynamometer) is a tool created to measure the torque and power output of an engine or motor. The mechanical portion of the dyno functions as a water brake.



It measures 71.5 × 43.3 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the ESP32-S3-WROOM-1-N16, HX711, AP2112R5-3.3TRG1 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BTrujillo816/coffee-scale repository on GitHub, at the commit this page was made from: the board is hardware/kicad/coffee-scale/coffee-scale.kicad_pcb and its schematic hardware/kicad/coffee-scale/coffee-scale.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).