

Arm Schematic V2
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 74
- Pads
- 333
- Tracks, vias
- 600, 34
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Dec 2024
- Updated
- 5 Feb 2026
Overview
Arm Schematic V2 is an open-source printed circuit board by ICRS, from the ICRS/IPRL-Electronics-Hardware repository on GitHub. It is a 2-layer board of 100 × 80 mm with 94 parts on 74 nets, routed with 600 tracks and 34 vias.
It is built around the ADS1115IDGS, AMS1117-3.3 and BSS138. Its parts include 48 resistors, 19 connectors, 12 transistors, 4 capacitors and 4 ICs.
Main components
3ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorisedAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdIPRL-Electronics-Hardware
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 10k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +29 |
| 12 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 11 | Conn_01x04 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J2, J3, J4, J6, J7, J8, J9, J10, J11, J13, J20 |
| 4 | Conn_01x02 | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J16, J17, J18, J19 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | Conn_01x03 | Connector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical | J1, J14, J15 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C18 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D2, D3 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R50 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J5 |
| 1 | LOGO | IPRL Footprints:IPRL_31mm | G*** |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U8 |
| 1 | ~ | ESP32_DevKit_38pin:Z_ESP32_DevKitC_38pin_socket | U2 |
More from ICRS/IPRL-Electronics-Hardware
12- 4 layers101 × 175 mm

- 2 layers100 × 100 mm

- 4 layers90 × 70 mm

- 2 layers100 × 72 mm

- 2 layers100 × 100 mm

- 2 layers120 × 93 mm

- 2 layers100 × 100 mm

- 2 layers100 × 80.1 mm

- 2 layers80 × 80 mm

- 2 layers48.5 × 99.8 mm

- 2 layers100 × 60 mm

- 2 layers23 × 23 mm

Similar boards
- 2 layers100 × 100 mm

Led controller v5
jacob-jarick/esp-solar-contoller
esp8266 and esp32 based solar controllers targetting fronius inverter users
119 parts5GPL-3.0 - 4 layers65.6 × 91.8 mm

- 2 layers88.8 × 52.3 mm

MM36-Data Expansion
KazanNinja/MM36-Data-Hub
ESP32 based DAQ board. Fit with a 4 external 16bit 5V capable ADCs, 6-DOF IMU, and GPS breakout. Has two 5V > 3.3V & 12V > 3.3V voltage dividers
84 parts1 - 4 layers100 × 49.8 mm

- 2 layers165.1 × 110 mm

- 2 layers69 × 54 mm

Controller board
andia89/MaraXEvolution
This repository contains the hardware design and firmware for the MaraX Evolution main controller board. This project is designed to replace the stock controller of the Lelit Mara X espresso machine, adding advanced…
75 parts6 - 2 layers90 × 71 mm

Power extender
StarGate01/power-extender
Hardware and software for a power and IO extension PCB with current monitoring and I2C interface.
78 parts5MIT - 2 layers65 × 68 mm

FolkraceCar2020
CASE-Association/FolkraceCar
Project for the Folkrace robot that CASE Board used in the Swedish Robotic Championship 2020
74 parts2Apache-2.0
Questions
How big is the Arm Schematic V2 PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arm Schematic V2 use?
94 parts, built around the ADS1115IDGS, AMS1117-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arm Schematic V2 KiCad files?
From the ICRS/IPRL-Electronics-Hardware repository on GitHub, at the commit this page was made from: the board is PCBs/Arm Schematic V2/Arm Schematic V2/Arm Schematic V2.kicad_pcb and its schematic PCBs/Arm Schematic V2/Arm Schematic V2/Arm Schematic V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arm Schematic V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ICRS before reusing the design.