

- Size
- 100 × 80.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 70
- Pads
- 216
- Tracks, vias
- 430, 33
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Dec 2024
- Updated
- 5 Feb 2026
Overview
Iprld is an open-source printed circuit board by ICRS, from the ICRS/IPRL-Electronics-Hardware repository on GitHub. It is a 2-layer board of 100 × 80.1 mm with 44 parts on 70 nets, routed with 430 tracks and 33 vias.
It is built around the ADS1115IDGSR, AMS1117-3.3 and XT60PW-F. Its parts include 10 resistors, 9 capacitors, 4 ICs, 2 connectors and 2 fuses.
Main components
3ADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsXT60PW-F
-Horizontal plug Yellow - Power connector / plug connectorChangzhou Amass ElecPlug
README
README.mdIPRL-Electronics-Hardware
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R24, R27, R28, R29, R30, R33, R34 |
| 4 | Conn_01x04 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | MRS_LB1, MRS_LF1, MRS_RB1, MRS_RF1 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | E1, e2, J2 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C14, C26 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric | C28, C29 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C15, C31 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R31, R32 |
| 2 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | I_LEFT2, I_RIGHT2 |
| 2 | Fuse | local:01530007Z | F1, F2 |
| 2 | SM06B-GHS-TB_LF__SN_ | local:SM06B-GHS-TB | CONTROL_L2, CONTROL_R2 |
| 2 | XT60PW-F | local:XT60PWF | PWR_L2, PWR_R2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ADS1115IDGSR | local:SOP50P490X110-10N | IC4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U15 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J3 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U9 |
| 1 | ~ | local:Z_ESP32_DevKitC_38pin_socket | U2 |
More from ICRS/IPRL-Electronics-Hardware
12- 4 layers101 × 175 mm

- 2 layers100 × 80 mm

- 2 layers100 × 100 mm

- 4 layers90 × 70 mm

- 2 layers100 × 72 mm

- 2 layers100 × 100 mm

- 2 layers120 × 93 mm

- 2 layers100 × 100 mm

- 2 layers80 × 80 mm

- 2 layers48.5 × 99.8 mm

- 2 layers100 × 60 mm

- 2 layers23 × 23 mm

Similar boards
- 4 layers102.8 × 67 mm

Entegre fc
ErdemA33/stm32f405-flight-controller
Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.
129 parts3 - 2 layers51 × 54 mm

- 2 layers

ESP32
teysvvv/ESP32-Wireless-Motor-Control
ESP32 based wireless control system using ESP-NOW and CAN communication for a slope-climbing robot, featuring a custom PCB for regulated power delivery.
16 parts - 2 layers65 × 56 mm

- 4 layers70 × 50 mm

Stage0 5
essen48183/MinAI
A single-file C++ transformer built to be read — every mechanism of a modern LLM in ~780 lines, with a textbook companion.
72 partsMIT - 2 layers100 × 100 mm

AquaPCB
schwabix-1311/aquaPCB
Open-hardware Raspberry Pi base board for aquaPi software. 12 V supply; six 5 A MOSFET outputs for LED lamps and fans (2 with hardware PWM); 4 SSR/relay drivers; protected inputs; 1-Wire; ADS1115 with a pH amplifier on…
158 partsCERN-OHL-S-2.0 - 4 layers100 × 80 mm

Lamp rev a
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
107 parts - 6 layers235.1 × 213.7 mm

Quiver PT3 Main PCB rounded
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
164 parts617CERN-OHL-S-2.0
Questions
How big is the Iprld PCB?
It measures 100 × 80.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Iprld use?
44 parts, built around the ADS1115IDGSR, AMS1117-3.3 and XT60PW-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iprld KiCad files?
From the ICRS/IPRL-Electronics-Hardware repository on GitHub, at the commit this page was made from: the board is PCBs/Drive board V4/iprld.kicad_pcb and its schematic PCBs/Arm Schematic V2/Arm Schematic V2/Arm Schematic V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iprld design in my own project?
Its repository states no licence, so its author keeps all rights: ask ICRS before reusing the design.