
Hand System Rev 1
NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand

ESP32 based wireless control system using ESP-NOW and CAN communication for a slope-climbing robot, featuring a custom PCB for regulated power delivery.
ESP32 is an open-source printed circuit board by teysvvv, from the teysvvv/ESP32-Wireless-Motor-Control repository on GitHub. It is a 2-layer board with 16 parts on 45 nets, routed with 144 tracks and 0 vias.
It is built around the ESP32-DEVKITC-32UE, LM2596S-5.0 and AMS1117-3.3, with the XT60PW-F among its other parts. Its parts include 4 ICs, 4 diodes, 4 connectors, 2 capacitors and 1 resistor. It belongs with the robots and motor control boards and the ESP32 boards of this library.
This project involves developing a wireless control and power supply system for a manual slope-climbing robot designed to travel from one edge of an inclined surface to the other.
The system uses two ESP32-DevKitC-32UE. The first ESP32 is connected to a Funduino joystick shield, which collects user inputs and transmits them wirelessly through ESP-NOW. The second ESP32, mounted on the robot, receives these commands and communicates with the motor controllers through CAN using an MCP2515 module.
The robot is powered by a 4S battery. To provide a regulated power supply for the ESP32, I designed a custom PCB incorporating two voltage regulation stages:
Under development and hardware testing.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N5822 | Diode_SMD:D_SMA | D1, D2, D3 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 300ohm | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47uH | Inductor_SMD:L_Wuerth_HCI-7030 | L1 |
| 1 | 47uf | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.00mm:PinHeader_1x07_P2.00mm_Vertical | J2 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x11_Pin | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J3 |
| 1 | ESP32-DEVKITC-32UE | kicad dclab:ESPRESSIF_ESP32-DEVKITC-32UE | U1 |
| 1 | LED | LED_THT:LED_D5.0mm | D4 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | MPU6050 | kicad dclab:MODULE_OC09600 | U4 |
| 1 | XT60PW-F | kicad dclab:AMASS_XT60PW-F | J1 |

NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand

cjg-1/FPV-RC-CAR
A wireless FPV control system for RC vehicles featuring real-time video transmission and custom embedded power management. Enables immersive first-person vehicle teleoperation with low-latency wireless architecture.

ErdemA33/stm32f405-flight-controller
Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.




andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

16 parts, built around the ESP32-DEVKITC-32UE, LM2596S-5.0, AMS1117-3.3 and XT60PW-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the teysvvv/ESP32-Wireless-Motor-Control repository on GitHub, at the commit this page was made from: the board is PCB_ESP32/ESP32.kicad_pcb and its schematic PCB_ESP32/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask teysvvv before reusing the design.