
Hand System Rev 1
NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand

API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand
Hand System Rev 1 is an open-source printed circuit board by NHuang58, from the NHuang58/Piano_Hand_Electronics repository on GitHub. It is a 4-layer board of 154.7 × 113.4 mm with 58 parts on 122 nets, routed with 254 tracks and 0 vias.
It is built around the ESP32-DEVKITC-32UE, LM2596S-5.0 and PCA9685PW, with the IRLZ44N among its other parts. Its parts include 28 resistors, 8 ICs, 4 capacitors, 2 transistors and 1 connector. It belongs with the audio and music and robots and motor control boards and the ESP32 boards of this library.
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand.
The KiCAD files have a full PCB design for the barrel jack, LM2896, motor servers, stepper motor driver, and microphone. This includes the Gerber files, drill files, and bill of materials. It also includes the libraries for the symbols and footprints used in this project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 10 | 220 | Resistor_SMD:R_0805_2012Metric | R23, R24, R25, R26, R27, R36, R37, R38, R39, R40 |
| 10 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3, M4, M5, M6, M8, M9, M10, M11 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R14, R28, R35 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | LM2596 | PCB_Components:LM2596 | U2, U5, U6 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R15 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R13, R16 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q3 |
| 2 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U7, U8 |
| 1 | 100 μF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | A4988_Stepper_Motor_Driver | Module:Pololu_Breakout-16_15.2x20.3mm | U3 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | ESP32-DEVKITC-32UE | DEVKIT_V1_ESP32-WROOM-32:MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
| 1 | Stepper_Motor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | M7 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U4 |

NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand

NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand



teysvvv/ESP32-Wireless-Motor-Control
ESP32 based wireless control system using ESP-NOW and CAN communication for a slope-climbing robot, featuring a custom PCB for regulated power delivery.



havrak/UAV-project
Building a UAV as part of my final year on high school, now my hobby project


UWCubeSat/PHAT-3-Main-Board
PCB design for the PHAT-3 weather balloon payload's main board, housing a radio, sensors, camera, and buck converter.
It measures 154.7 × 113.4 mm and has 4 copper layers, 1.6 mm thick.
58 parts, built around the ESP32-DEVKITC-32UE, LM2596S-5.0, PCA9685PW and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NHuang58/Piano_Hand_Electronics repository on GitHub, at the commit this page was made from: the board is Spring_2026_Final/Hand_System_Rev_1/Hand_System_Rev_1.kicad_pcb and its schematic Fall_2025/Hand_System_Rev_1/555timer/555timer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NHuang58 before reusing the design.