2 layers41.3 × 28.2 mm
2 layers226 × 236.9 mm
Workshop Payload
CasuariusSYC/Payload01EEPISAT- Size
- 226 × 236.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 90
- Pads
- 300
- Tracks, vias
- 953, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Oct 2026
- Updated
- 15 Oct 2026
Overview
Workshop Payload is an open-source printed circuit board by CasuariusSYC, from the CasuariusSYC/Payload01EEPISAT repository on GitHub. It is a 2-layer board of 226 × 236.9 mm with 86 parts on 90 nets, routed with 953 tracks and 10 vias.
It is built around the ESP32-DEVKITC-32UE, SAM-M10Q-00B and LM2596S-ADJ, with the MP1584EN, BMP280 and LM358 among its other parts. Its parts include 28 connectors, 24 resistors, 11 ICs, 10 diodes and 7 capacitors. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-DEVKITC-32UE
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
SAM-M10Q-00B
LGA-20Hot start acceleration LGA-20 GNSS Modules ROHSu-bloxGNSS Modules
LM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC ConvertersMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised1N4729A
DO-41GDO-41G Zener Diodes ROHSluJingZener Diodes
SJ1-3525N
插件插件 Audio Connectors ROHSCUIAudio Connectors
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED | LED_THT:LED_D5.0mm | D4, D5, D6, D7, D9, D10, D11 |
| 6 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R12, R13, R20, R22, R23 |
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R7, R9 |
| 4 | 8.4V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12, J13, J22, J23 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R16, R17 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric | R18, R19 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C5, C6 |
| 2 | 1N5822 | Diode_THT:D_DO-201_P12.70mm_Horizontal | D2, D3 |
| 2 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R15 |
| 2 | 220uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C3, C4 |
| 2 | 2604-1302 | 2604-1302:WAGO_2604-1302 | J5, J6 |
| 2 | 3V3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14, J15 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1, C2 |
| 2 | 5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10, J11 |
| 2 | 5V Detonator | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J20, J21 |
| 2 | 68uH | Inductor_SMD:L_APV_ANR3015 | L1, L2 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U4, U5 |
| 2 | MP1584 | Custom Library:MP1584 | U2, U3 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U10, U11 |
| 2 | Pin Detonator | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J24, J25 |
| 1 | 0.1 | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | 1.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 1N4729A | Diode_THT:D_DO-201_P12.70mm_Horizontal | D1 |
| 1 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 1 | BMP280 | Custom Library:BMP280 | U8 |
| 1 | Backup Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | ESP32-DEVKITC-32U | ESP32-DEVKITC-32U:MODULE_ESP32-DEVKITC-32U | U6 |
| 1 | GY-521 | GY-521:MODULE_GY-521 | U7 |
| 1 | Kontak 1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J28 |
| 1 | Kontak 2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J27 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LoRa Ra-02 SX1278 | Custom Library:LoRa Ra-02 SX1278 | U9 |
| 1 | RBF Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | SAM-M10Q | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | SJ1-3525N | SJ1-3525N:CUI_SJ1-3525N | J26 |
| 1 | Servo 1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | Servo 2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | Servo 3 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J9 |
| 1 | Socket LoRa 1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J18 |
| 1 | Socket LoRa 2 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J16 |
| 1 | Socket LoRa MCU 1 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J17 |
| 1 | Socket LoRa MCU 2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J19 |
More from CasuariusSYC/Payload01EEPISAT
2- 2 layers58.1 × 59.1 mm
Similar boards
- 2 layers41.3 × 31.2 mm
Levitator
QuartzAl/Projects-showcase
Main repository where I keep all of my project showcases related to Electrical Engineering These include PCB designs, electronic circuits, code snippets, and more.
13 parts - 2 layers149.9 × 99.5 mm
- 2 layers100 × 100 mm
- 2 layers12.2 × 40.4 mm
BadUSB
joelsernamoreno/Attiny85-Standalone
PCB designs based on the Attiny85 microcontroller for standalone development.
7 parts21CC-BY-4.0 - 2 layers40 × 25 mm
- 2 layers60 × 80 mm
1bit FA v2
dguuu/From-Transistor-To-CPU
Plan to use transistor to study how to make a CPU and learn everything will happen irl.
89 parts - 4 layers154.7 × 113.4 mm
Hand System Rev 1
NHuang58/Piano_Hand_Electronics
API using Music 21 and MIDI to convert midi files and piano notes to coordinates for a piano hand
58 parts - 4 layers45 × 89 mm
Questions
How big is the Workshop Payload PCB?
It measures 226 × 236.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Workshop Payload use?
86 parts, built around the ESP32-DEVKITC-32UE, SAM-M10Q-00B, LM2596S-ADJ and MP1584EN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Workshop Payload KiCad files?
From the CasuariusSYC/Payload01EEPISAT repository on GitHub, at the commit this page was made from: the board is Workshoop 1/PCB/Payload1(Revisi 1)/Workshop Payload/Workshop Payload.kicad_pcb and its schematic Workshoop 1/PCB/Payload1(Revisi 1)/Workshop Payload/.history/Actuator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Workshop Payload design in my own project?
Its repository states no licence, so its author keeps all rights: ask CasuariusSYC before reusing the design.