Skip to the content
2 layers40 × 25 mmUSBZyno, the printed circuit board in 3D

Low cost ATTINY85 Development Board

Size
40 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
12
Pads
38
Tracks, vias
62, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
30 Aug 2022
Updated
16 Apr 2026

Overview

USBZyno is an open-source printed circuit board by bekaben, from the bekaben/ZINOATTINY repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 25 mm with 12 parts on 12 nets, routed with 62 tracks and 0 vias.

It is built around the ATTINY85-20PU and 1N4729A. Its parts include 4 resistors, 3 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

ZINOATTINY :

ZINOATTINY is a low-cost ATTINY85 board compatible with the ARDUINO IDE.
Designed in KICAD by Belkacem BENADDA for IACUBEE.

Parts

12
QtyValueFootprintReferences
21N4729ADiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
268Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R3
11,5KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
1100nfCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
1500Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4
1ATtiny85-20PPackage_DIP:DIP-8_W7.62mmU1
1Conn_01x06_FemaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1LEDLED_THT:LED_D3.0mmD3
1PolyfuseCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmF1
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ1

Similar boards

  • 2 layers100 × 100 mmController, the printed circuit board in 3D

    Controller

    profdc9/ModularTuner

    A Modular Antenna Tuner for a Phased Array Antenna System

    180 parts59
  • 2 layers12.2 × 40.4 mmBadUSB, the printed circuit board in 3D

    BadUSB

    joelsernamoreno/Attiny85-Standalone

    PCB designs based on the Attiny85 microcontroller for standalone development.

    7 parts21CC-BY-4.0
  • 2 layers60 × 80 mm1bit FA v2, the printed circuit board in 3D

    1bit FA v2

    dguuu/From-Transistor-To-CPU

    Plan to use transistor to study how to make a CPU and learn everything will happen irl.

    89 parts
  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers76.2 × 50.8 mmJerboa-8, the printed circuit board in 3D

    Jerboa-8

    strickyak/jerboa-attiny85-mod-synth

    Modular Synthesizer using an ATtiny85 chip for each module.

    23 parts31MIT

Questions

How big is the USBZyno PCB?

It measures 40 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USBZyno use?

12 parts, built around the ATTINY85-20PU and 1N4729A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USBZyno KiCad files?

From the bekaben/ZINOATTINY repository on GitHub, at the commit this page was made from: the board is DSN/USBZyno.kicad_pcb and its schematic DSN/USBZyno.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USBZyno design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).