

DRILLTEAM
- Size
- 100 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 89
- Pads
- 341
- Tracks, vias
- 667, 59
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Dec 2024
- Updated
- 5 Feb 2026
Overview
DRILLTEAM is an open-source printed circuit board by ICRS, from the ICRS/IPRL-Electronics-Hardware repository on GitHub. It is a 2-layer board of 100 × 72 mm with 88 parts on 89 nets, routed with 667 tracks and 59 vias.
It is built around the ESP32-S3, HX711 and AMS1117-3.3, with the USBLC6-2SC6, S8550 and MBRA340T3G among its other parts. Its parts include 34 capacitors, 25 resistors, 6 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsHX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)S8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MBRA340T3G
DO-214AC1 Independent 100A 3A 40V 450mV DO-214AC Schottky Diodes ROHSTokmasSchottky DiodesTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdIPRL-Electronics-Hardware
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C13, C14, C17, C18, C19, C20, C21, C23, C24, C25, C27 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C12, C15, C22, C30, C31, C32, C33, C34 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric | R16, R17, R20, R21, R24, R25 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10, C11 |
| 4 | 1K7 | Resistor_SMD:R_0805_2012Metric | R7, R9, R11, R13 |
| 4 | 3K3 | Resistor_SMD:R_0805_2012Metric | R8, R10, R12, R14 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C6, C28 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C16, C26, C29 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric | R19, R22 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R18, R23 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x02 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | Limit Switch 1, Limit Switch 2 |
| 2 | Conn_01x03 | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | Servo 1, Servo 2 |
| 2 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U4, U6 |
| 2 | S8550 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | SW_Push | footprints:PTS645SK43SMTR92LFS | SW1, SW2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | Power In |
| 1 | Conn_01x08 | Connector_JST:JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal | Motor Driver |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | Encoder 1 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | Encoder 2 |
| 1 | Encoder 2 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | Encoder 1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LOGO | footprints:IPRL_31mm | G*** |
| 1 | Load Cell 1 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | Load Cell 1 |
| 1 | Load Cell 2 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | Load Cell 2 |
| 1 | Load Cell 3 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | Load Cell 3 |
| 1 | MBRA340T3G | Diode_SMD:D_SMA | D3 |
| 1 | TYPE-C-31-M-12 | footprints:TYPE-C-31-M-12 | J13 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | W25Q16JVUXIQ_TR | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U2 |
More from ICRS/IPRL-Electronics-Hardware
12- 4 layers101 × 175 mm

- 2 layers100 × 80 mm

- 2 layers100 × 100 mm

- 4 layers90 × 70 mm

- 2 layers100 × 100 mm

- 2 layers120 × 93 mm

- 2 layers100 × 100 mm

- 2 layers100 × 80.1 mm

- 2 layers80 × 80 mm

- 2 layers48.5 × 99.8 mm

- 2 layers100 × 60 mm

- 2 layers23 × 23 mm

Similar boards
- 2 layers100 × 100 mm

- 4 layers66 × 100 mm

- 2 layers128 × 77 mm

- 2 layers100 × 100 mm

Mcu
cs2dsb/coffee_assistant
Free and open source software distributed under the terms of both the [MIT License][lm] and the [Apache License 2.0][la].
168 parts10Apache-2.0 - 2 layers52 × 38 mm

Esp32-c3-smart scale
xmyoot/esp32-c3-smart-scale
A low-power Wi-Fi/BLE smart-scale main board, designed natively in KiCad 10. It has a 24-bit load-cell front end, USB-C Li-ion charging, an external antenna and a 35 µA standby budget.
42 parts - 4 layers62 × 46.9 mm

4LayerLabProject
ZharbolatDinmukhamed/Haptic-Glove-PCB
A wrist-mounted PCB for a haptic feedback glove, developed as part of my Research Assistantship at the Tactile Laboratory, Nazarbayev University.
122 parts - 2 layers77.2 × 44.5 mm

Esp32 rtc display
beer88/PCB-Projects-Kicad
This repository contains a collection of PCB design projects developed using KiCad, covering a range of applications in embedded systems, automation, and hardware development.
55 parts1 - 4 layers188 × 80 mm

Questions
How big is the DRILLTEAM PCB?
It measures 100 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRILLTEAM use?
88 parts, built around the ESP32-S3, HX711, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRILLTEAM KiCad files?
From the ICRS/IPRL-Electronics-Hardware repository on GitHub, at the commit this page was made from: the board is PCBs/DRILLTEAM/DRILLTEAM.kicad_pcb and its schematic PCBs/Arm Schematic V2/Arm Schematic V2/Arm Schematic V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRILLTEAM design in my own project?
Its repository states no licence, so its author keeps all rights: ask ICRS before reusing the design.