4 layers64 × 43 mm UAV HWE Design, the printed circuit board in 3D

UAV HWE Design

Size: 64 × 43 mm
Copper layers: 4
Thickness: 4.69 mm
Parts: 96
Nets: 101
Pads: 354
Tracks, vias: 738, 204
Pours: 14
Routed: Yes
KiCad: KiCad 6 (file 20211014)
Created: 13 Oct 2022
Updated: 12 Jun 2023

Overview

UAV HWE Design is an open-source printed circuit board by fuchs-harry, from the fuchs-harry/UAV_Hardware_Design repository on GitHub, published under the MIT licence. It is a 4-layer board of 64 × 43 mm with 96 parts on 101 nets, routed with 738 tracks and 204 vias.

It is built around the LM2901. Its parts include 34 capacitors, 27 resistors, 6 transistors, 6 connectors and 3 ICs. It belongs with the STM32 boards of this library.

Main components

LM2901
UncategorisedTexas Instruments

README

README.md

UAV_Hardware_Design

Category and platform

STM32

Project files

Show this board on your page

https://pcbkit.io/boards/fuchs-harry/UAV_Hardware_Design

The board's own page, for a message or a post.

Source

Repository: fuchs-harry/UAV_Hardware_Design
Board file: UAV_HWE_Design/UAV_HWE_Design.kicad_pcb
Commit: 82bbb57
Licence: MIT

Parts

Qty	Value	Footprint	References
12	R_Small	Resistor_SMD:R_0402_1005Metric	R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27
6	100n	Capacitor_SMD:C_0402_1005Metric	C4, C5, C6, C7, C8, C13
6	1µ	Capacitor_SMD:C_1206_3216Metric	C1, C19, C20, C22, C23, C24
6	IRFS7530-7PPBF	footprints:TO127P1524X483-7N	Q1, Q2, Q3, Q4, Q5, Q6
5	MountingHole_Pad	footprints:Motorpad	H5, H6, H7, H8, H9
4	C_Small	Capacitor_SMD:C_0402_1005Metric	C31, C32, C33, C34
4	MountingHole	MountingHole:MountingHole_3.2mm_M3	H1, H2, H3, H4
4	TestPoint_2Pole	Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical	TP1, TP2, TP3, TP4
3	100p	Capacitor_SMD:C_0402_1005Metric	C28, C29, C30
3	2m	Resistor_SMD:R_2512_6332Metric	R13, R14, R15
3	330	Resistor_SMD:R_0402_1005Metric	R2, R3, R4
3	470p	Capacitor_SMD:C_0402_1005Metric	C9, C10, C12
3	Conn_01x03	Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical	J1, J5, J6
2	10k	Resistor_SMD:R_0402_1005Metric	R1, R11
2	1u	Capacitor_SMD:C_1206_3216Metric	C14, C15
2	2.2k	Resistor_SMD:R_0402_1005Metric	R5, R6
2	220n	Capacitor_SMD:C_0402_1005Metric	C26, C27
2	4.7µ	Capacitor_SMD:C_1206_3216Metric	C3, C18
2	Conn_01x04	Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical	J2, J4
1	100nF	Capacitor_SMD:C_0402_1005Metric	C17
1	10n	Capacitor_SMD:C_0402_1005Metric	C2
1	10µ	Capacitor_SMD:C_1206_3216Metric	C21
1	12k	Resistor_SMD:R_0402_1005Metric	R8
1	22µ	footprints:Inductor_SMD_5.8mmx5.2mm	L2
1	2m	Capacitor_THT:CP_Radial_D13.0mm_P7.50mm	C16
1	2u2	Capacitor_SMD:C_1206_3216Metric	C11
1	3.3	Diode_SMD:D_SOD-123	D2
1	39n	Inductor_SMD:L_0402_1005Metric	L1
1	3k	Resistor_SMD:R_0402_1005Metric	R10
1	3k3	Resistor_SMD:R_0402_1005Metric	R12
1	470	Resistor_SMD:R_0402_1005Metric	R9
1	47µ	Capacitor_SMD:C_1206_3216Metric	C25
1	49k9	Resistor_SMD:R_0402_1005Metric	R7
1	6EDL7141	footprints:QFN50P700X700X90-49N-3-2	U2
1	Conn_01x05	Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical	J3
1	LM2901	Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm	U3
1	NetTie_2	footprints:NetTie-2_SMD_Pad0.5mm	NT1
1	NetTie_2	NetTie:NetTie-2_SMD_Pad2.0mm	NT2
1	RED	LED_SMD:LED_1206_3216Metric	D1
1	STM32F446RCTx	Package_QFP:LQFP-64_10x10mm_P0.5mm	U1
1	SW_SPDT	SamacSys_Parts:MFP113D	SW1

Similar boards

2 layers300 × 53 mm
BMW E30 VFL SI Board
FabianGmeiner/BMW_E30_SI_Board
Reverse engineering and improving the BMW E30 service indicator board
112 parts20GPL-3.0
4 layers180 × 120 mm
MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0
2 layers85 × 50 mm
DataAcquisitionUnit
RobertGawron/HardwareDataLogger
Data logger shield based on STM32+ESP32. Has: LCD, keyboard, WIFi, UART and SD card for data storage. Input is as pulse counter and UART communication.
70 parts6MIT
6 layers268 × 230 mm
Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0
2 layers79.7 × 80 mm
Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1
4 layers100 × 99.4 mm
MPPT V3
hazzalemon/MPPTV3_board
3rd revision of the MPPT solar charge controller PCB design
204 parts1
2 layers148.6 × 83.8 mm
New BSPD
Full-Blue-Racing/FBR24-Electronics
This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.
62 parts
2 layers126.9 × 56 mm
Płytka z czujnikami
KamilWuu/Line_Follower_ZACZ
line follower robot
93 parts

Questions

How big is the UAV HWE Design PCB?

It measures 64 × 43 mm and has 4 copper layers, 4.69 mm thick.

What parts does the UAV HWE Design use?

96 parts, built around the LM2901. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UAV HWE Design KiCad files?

From the fuchs-harry/UAV_Hardware_Design repository on GitHub, at the commit this page was made from: the board is UAV_HWE_Design/UAV_HWE_Design.kicad_pcb and its schematic MotorShield/Mosfet_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UAV HWE Design design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).