

MotorShield
- Size
- 92 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 101
- Pads
- 256
- Tracks, vias
- 328, 159
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Oct 2022
- Updated
- 12 Jun 2023
Overview
MotorShield is an open-source printed circuit board by fuchs-harry, from the fuchs-harry/UAV_Hardware_Design repository on GitHub, published under the MIT licence. It is a 2-layer board of 92 × 92 mm with 54 parts on 101 nets, routed with 328 tracks and 159 vias.
Its parts include 21 capacitors, 9 resistors, 6 transistors, 1 IC and 1 diode.
README
README.mdUAV_Hardware_Design
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 390u | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C4, C5, C18, C19, C20, C21 |
| 6 | IRFS7530-7PPBF | footprints:TO127P1524X483-7N | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 1µ | Capacitor_SMD:C_1206_3216Metric | C11, C12, C13, C15, C17 |
| 3 | 2m | Resistor_SMD:R_2512_6332Metric | R3, R5, R7 |
| 3 | 330 | Resistor_SMD:R_1206_3216Metric | R2, R4, R6 |
| 3 | 470p | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | MountingHole_Pad | footprints:Motorpad | H1, H2, H3 |
| 3 | NetTie_2 | footprints:NetTie-2_SMD_Pad0.1mm | NT1, NT2, NT3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R8, R9 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C14, C16 |
| 2 | 220n | Capacitor_SMD:C_1206_3216Metric | C8, C9 |
| 2 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2 |
| 1 | 10µ | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 1k6 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 22µ | footprints:Inductor_SMD_5.8mmx5.2mm | L1 |
| 1 | 4.7µ | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 47µ | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 6EDL7141 | footprints:AdapterBoard | U |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP7 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | NUCLEO-F401RE | footprints:ST_NUCLEO-F401RE | U1 |
| 1 | NetTie_2 | footprints:NetTie-2_SMD_Pad0.5mm | NT4 |
| 1 | Screw_Terminal_01x02 | SamacSys_Parts:1714955 | J1 |
More from fuchs-harry/UAV_Hardware_Design
1- 4 layers64 × 43 mm

Similar boards
- 2 layers203 × 26.6 mm

- 2 layers30 × 50 mm

- 2 layers100.1 × 40 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm

- 2 layers

- 2 layers104.3 × 38.9 mm

- 2 layers

- 2 layers93.8 × 64.2 mm

PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0
Questions
How big is the MotorShield PCB?
It measures 92 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MotorShield use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorShield KiCad files?
From the fuchs-harry/UAV_Hardware_Design repository on GitHub, at the commit this page was made from: the board is MotorShieldadapted/MotorShield.kicad_pcb and its schematic MotorShield/Mosfet_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorShield design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).