hazzalemon/MPPTV3_board13rd revision of the MPPT solar charge controller PCB design
MPPT V3 is an open-source printed circuit board by hazzalemon, from the hazzalemon/MPPTV3_board repository on GitHub. It is a 4-layer board of 100 × 99.4 mm with 204 parts on 130 nets, routed with 1,337 tracks and 536 vias.
It is built around the SN65HVD234DR-JSM, UCC27211DRMR and INA240A2D, with the LM5164DDAR, TP181A1-CR and W25Q128JVSIQ TR among its other parts. Its parts include 73 capacitors, 50 resistors, 28 diodes, 26 ICs and 6 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C13, C24, C27, C29, C30, C35, C40, C41, C42, C43, C45, C46, C50, C61 |
| 14 | B110WS | easyeda2kicad:SOD-323_L1.7-W1.3-LS2.5-FD | D1, D2, D3, D4, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 12 | 10u | Capacitor_SMD:C_1210_3225Metric | C47, C49, C51, C52, C53, C54, C55, C56, C57, C58, C62, C63 |
| 10 | 1u | Capacitor_SMD:C_0402_1005Metric | C15, C16, C19, C28, C31, C36, C38, C48, C72, C73 |
| 10 | B16WS_C7420327 | easyeda2kicad:SOD-323_L1.7-W1.3-LS2.5-FD | D19, D20, D21, D22, D23, D24, D25, D26, D27, D28 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R12, R17, R18, R19, R29, R34, R35, R47, R48 |
| 8 | 300n | Capacitor_SMD:C_0402_1005Metric | C7, C8, C12, C14, C17, C18, C64, C65 |
| 8 | 4.3 | Resistor_SMD:R_0603_1608Metric | R21, R22, R31, R32, R33, R38, R39, R40 |
| 8 | S130N10LF | easyeda2kicad:TDFN-8_L5.9-W5.2-P1.27-LS6.2-BL | U1, U2, U3, U4, U9, U10, U22, U23 |
| 6 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R5, R6, R7, R24, R26 |
| 6 | 4.125k | Resistor_SMD:R_0402_1005Metric | R25, R27, R41, R42, R43, R44 |
| 6 | C_Small | Capacitor_SMD:C_0402_1005Metric | C32, C33, C68, C69, C70, C71 |
| 6 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R15, R16, R50, R51 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C4, C9, C44 |
| 4 | 470u | easyeda2kicad:CAP-TH_BD16.0-P7.50-D1.2-FD | C59, C60, C66, C67 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R13, R14, R36, R37 |
| 4 | 500 | Resistor_SMD:R_0402_1005Metric | R4, R30, R45, R46 |
| 4 | D_Zener | Diode_SMD:D_SOD-123 | D5, D6, D7, D8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 4 | UCC27211DR | easyeda2kicad:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U11, U13, U16, U17 |
| 2 | 0.5m | Resistor_SMD:R_2512_6332Metric | R20, R28 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C5, C22 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C1, C20 |
| 2 | 220u | easyeda2kicad:IND-SMD_L5.8-W5.2 | L2, L3 |
| 2 | 2m | Resistor_SMD:R_2512_6332Metric | R8, R23 |
| 2 | 2n | Capacitor_SMD:C_0402_1005Metric | C3, C21 |
| 2 | 2n | Inductor_SMD:L_0402_1005Metric | L5, L6 |
| 2 | 47u | Capacitor_SMD:C_1206_3216Metric | C6, C23 |
| 2 | 7p | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | ADS1015IDGSR | easyeda2kicad:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL | U12, U20 |
| 2 | Fan_conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J5 |
| 2 | INA240A2D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18, U21 |
| 2 | L | easyeda2kicad:33x10mm toroid | L7, L8 |
| 2 | LM5164DDAR | easyeda2kicad:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U5, U7 |
| 2 | TP181A1-CR | easyeda2kicad:SC70-6_L2.1-W1.3-P0.65-LS2.3-BL | U8, U15 |
| 2 | Thermistor_NTC | Resistor_SMD:R_0402_1005Metric | TH1, TH2 |
| 2 | XT60PW-M | easyeda2kicad:CONN-TH_XT60PW-M | CN1, CN2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C39 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 24nH | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 453k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 49.9k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 63k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | AMS1117-3.3(XBLW) | easyeda2kicad:SOT-89-3_L4.5-W2.5-P1.50-LS4.2-BR | U6 |
| 1 | AO3400_C4748804 | footprint:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | U25 |
| 1 | Antenna_Shield | Resistor_SMD:R_1206_3216Metric | AE1 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | ESP32-S3(FN8) | easyeda2kicad:QFN-56_L7.0-W7.0-P0.40-TL-EP4.0 | U14 |
| 1 | HS13L03W2C01 | easyeda2kicad:OLED-TH_L35.4-W33.5_HS13L03W2C01 | OLED1 |
| 1 | LM2901 | easyeda2kicad:SOP-14_L8.6-W3.9-P1.27-LS6.0-BL-1 | U24 |
| 1 | SN65HVD234DR | footprint:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U27 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVSIQTR | easyeda2kicad:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U19 |
Andresse2020/NovaDrone-Hardware
Complete electronic system design for a high-performance quadcopter drone, developed entirely from scratch. Includes power distribution, motor control, flight stabilization, sensor integration, and communication…
LeoDJ/USB-C_PD_PSU
A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)
LVladymyr/WAFEL-Evaluation-Board
Evaluation board for TI BQ76952 multi-chemistry BMS IC
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
Pegoku/Home-Assistant-Control-pad
This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).
It measures 100 × 99.4 mm and has 4 copper layers, 2.27 mm thick.
204 parts, built around the SN65HVD234DR-JSM, UCC27211DRMR, INA240A2D and LM5164DDAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hazzalemon/MPPTV3_board repository on GitHub, at the commit this page was made from: the board is MPPT_V3.kicad_pcb and its schematic MPPT_ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hazzalemon before reusing the design.