Skip to the content
123456789

LM5164DDAR

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 10.5uA 1A 1MHz 6V~100V Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHS

Part id
ti/LM5164DDAR
Category
DC DC Converters
Package
SO-8-EP
Pins
9
In stock
2,780 at JLCPCB (C477928)
Used on
22 open-source boards

Overview

The LM5164DDAR is a DC DC Converter made by Texas Instruments in a SO-8-EP package with 9 pins. -40℃~+150℃@(TJ) 1 10.5uA 1A 1MHz 6V~100V Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LM5164DDA, from KiCad's library) and its footprint (Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm, from KiCad's library), ready for a KiCad board. 2,780 are in stock at JLCPCB (part C477928). 22 open-source boards in 16 repositories on GitHub use it.

Symbol

1GND2VIN3EN/UVLO4RON5FB6PGOOD7BST8SW9EP
Regulator_Switching:LM5164DDAFrom KiCad's library

Footprint

123456789
Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mmFrom KiCad's library

From the datasheet

14
Supply, least
6 V · VIN, recommended operating min · p. 4
Supply, most
100 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
100 V · VIN to GND, absolute max · p. 4
Junction, hottest
150 °C · Operating junction temperature max · p. 4
Takes working
600 µA · VIN active current typical, VEN = 2.5V · p. 5
Takes asleep
3 µA · VIN shutdown current typical, VEN = 0V · p. 5
Takes asleep
10.5 µA · VIN sleep current typical, VEN = 2.5V, VFB = 1.5V · p. 5
Gives
1 A · Rated continuous DC load current · p. 9
Feedback reference
1.2 V · FB regulation voltage typical, VFB falling · p. 5
Current limit
1.5 A · High-side peak current limit typical · p. 6
Current limit
1.2 A · Valley current limit typical · p. 6
Junction to air (DDA (SOIC))
43.4 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (DDA (SOIC))
16.1 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (DDA (SOIC))
59.5 K/W · Junction-to-case top thermal resistance · p. 5

What it is and has

11
Control architecture
Constant on-time (COT), synchronous step-down · p. 9
Input voltage range
6V to 100V · p. 1
Soft start
Fixed 3ms internal timer · p. 1
Protection
Peak and valley current-limit protection · p. 1
Protection
Input UVLO and thermal shutdown · p. 1
EMI
Meets CISPR 25 class 5 standard · p. 1
Power good
Open-drain indicator · p. 1
Package
DDA, SO PowerPAD, 8 pins, 4.9mm × 6mm · p. 1
Protection
Peak and valley current limit · p. 1
Protection
Thermal shutdown, automatic restart · p. 14
Power good
Open-drain output · p. 14

Around it

6
cap 2.2nF
between BST and SW; Required high-quality 50V X7R ceramic capacitor for the internal high-side gate driver. · p. 3
res 10kΩ to 100kΩ
between PGOOD and source voltage; External pullup resistor for the open-drain power good indicator. · p. 3
cap 2.2nF, 50V
between BST and SW; Required X7R ceramic bootstrap capacitor; higher capacitance can damage the internal regulator. · p. 13
res 100kΩ to 1MΩ
between VOUT and FB; RFB1 feedback divider upper resistor; keep feedback resistors close to FB. · p. 12
res 1 MΩ
between VIN and EN/UVLO; Recommended RUV1 for the input undervoltage lockout divider. · p. 14
res 10kΩ to 100kΩ
between PGOOD and pullup supply; Pullup supply must not exceed 14V. · p. 14

Specifications

53
ParameterConditionsAs printedPage
Input voltageVIN to GNDmin -0.3 · max 100 V4
Input voltageEN to GNDmin -0.3 · max 100 V4
Input voltageFB to GNDmin -0.3 · max 5.5 V4
Input voltageRON to GNDmin -0.3 · max 5.5 V4
Bootstrap capacitorExternal BST to SW capacitancemin 1.5 · max 2.5 nF4
Output voltageBST to GNDmin -0.3 · max 105.5 V4
Output voltageBST to SWmin -0.3 · max 5.5 V4
Output voltageSW to GNDmin -1.5 · max 100 V4
Output voltageSW to GND (20ns transient)min -3 V4
Output voltagePGOOD to GNDmin -0.3 · max 14 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± ratingmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ± ratingmax 500 V4
Input voltage VINmin 6 · max 100 V4
Switch node voltage VSWmax 100 V4
Enable voltage VEN/UVLOmax 100 V4
Load current ILOADNOM = 1 Atyp 1 · max 1.25 A4
Switching frequency FSWmax 1000 kHz4
External BST to SW capacitance CBSTNOM = 2.2 nFtyp 2.2 nF4
Programmable on-time tONmin 50 · max 10000 ns4
Junction-to-ambient thermal resistance RθJADDA (SOIC), 8 PINStyp 43.4 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DDA (SOIC), 8 PINStyp 59.5 °C/W5
Junction-to-board thermal resistance RθJBDDA (SOIC), 8 PINStyp 16.1 °C/W5
Junction-to-top characterization parameter ΨJTDDA (SOIC), 8 PINStyp 4 °C/W5
Junction-to-board characterization parameter ΨJBDDA (SOIC), 8 PINStyp 16.3 °C/W5
Junction-to-case (bottom) thermal resistance RθJC(bot)DDA (SOIC), 8 PINStyp 3.9 °C/W5
VIN shutdown current IQ-SHUTDOWNVIN = 24V, VEN = 0Vtyp 3 · max 15 uA5
VIN sleep current IQ-SLEEP1VIN = 24V, VEN = 2.5V, VFB = 1.5Vtyp 10.5 · max 25 uA5
VIN active current IQ-ACTIVEVIN = 24V, VEN = 2.5Vtyp 600 · max 880 uA5
Shutdown threshold VSD-RISINGVEN/UVLO risingtyp 1.1 V5
Shutdown threshold VSD-FALLINGVEN/UVLO fallingmin 0.45 V5
Enable threshold VEN-RISINGVEN/UVLO risingmin 1.45 · typ 1.5 · max 1.55 V5
Enable threshold VEN-FALLINGVEN/UVLO fallingmin 1.35 · typ 1.4 · max 1.44 V5
FB regulation voltage VREFVFB fallingmin 1.181 · typ 1.2 · max 1.218 V5
On-time1 tON1VVIN = 6V, RRON = 75kΩtyp 5000 ns5
On-time2 tON2VVIN = 6V, RRON = 25kΩtyp 1650 ns5
On-time3 tON3VVIN = 12V, RRON = 75kΩtyp 2550 ns5
On-time4 tON4VVIN = 12V, RRON = 25kΩtyp 830 ns5
FB upper threshold for PGOOD high to low VPG-UTHVFB risingmin 1.105 · typ 1.14 · max 1.175 V5
FB lower threshold for PGOOD high to low VPG-LTHVFB fallingmin 1.055 · typ 1.08 · max 1.1 V5
PGOOD upper and lower threshold hysteresis VPG-HYSVFB fallingtyp 60 mV5
PGOOD pulldown resistance RPGVFB = 1Vtyp 30 Ω5
Gate drive UVLO VBST-UVVBST risingtyp 2.7 · max 3.4 V5
High-side MOSFET RDSON RDSON-HSISW = –100mAtyp 0.725 Ω5
Low-side MOSFET RDSON RDSON-LSISW = 100mAtyp 0.33 Ω5
Internal soft-start time tSSmin 1.75 · typ 3 · max 4.75 ms6
Peak current limit threshold (HS) IPEAK1min 1.25 · typ 1.5 · max 1.75 A6
Peak current limit threshold (LS) IPEAK2min 1.25 · typ 1.5 · max 1.75 A6
Min of (IPEAK1 or IPEAK2) minus IVALLEY IDELTA-ILIMmin 200 · typ 300 mA6
Valley current limit threshold IVALLEYmin 0.95 · typ 1.2 · max 1.4 A6
Thermal shutdown threshold TSDTJ risingtyp 175 °C6
Thermal shutdown hysteresis TSD-HYStyp 10 °C6

Pins, by the datasheet

9
1 GND
Ground connection for internal circuits. · p. 3
2 VIN
Supply input for the high-side MOSFET and internal bias regulator; connect directly to the input supply with short, low impedance paths. · p. 3
3 EN/UVLO
Precision enable and undervoltage lockout programming input; below 1.1V shuts down, between 1.1V and 1.5V enables standby, and above 1.5V begins startup. · p. 3
4 RON
A resistor to GND sets the buck switch on-time. · p. 3
5 FB
Feedback input of voltage regulation comparator. · p. 3
6 PGOOD
Power good indicator; connect to a source voltage through a 10kΩ to 100kΩ pullup resistor. · p. 3
7 BST
Bootstrap gate-drive supply; connect a high-quality 2.2nF 50V X7R ceramic capacitor between BST and SW. · p. 3
8 SW
Switching node connecting the high-side MOSFET source and low-side MOSFET drain; connect to the power inductor. · p. 3
— EP
Exposed pad has no internal electrical connection; connect to GND and a large copper plane to reduce thermal resistance. · p. 3

Ordering codes, by the datasheet

6
LM5164DDAR
SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAU or NIPDAUAG finish · p. 34
LM5164DDAR.A
SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAU finish · p. 34
LM5164DDARG4
SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAU finish · p. 34
LM5164DDARG4.A
SO PowerPAD (DDA), 8 pins · 2500 units, large tape and reel; NIPDAU finish · p. 34
LM5164DDAT
SO PowerPAD (DDA), 8 pins · 250 units, small tape and reel; NIPDAU or NIPDAUAG finish · p. 34
LM5164DDAT.A
SO PowerPAD (DDA), 8 pins · 250 units, small tape and reel; NIPDAU finish · p. 34

Open-source boards using it

22See all 22
  • 8 layers64 × 56 mmPS GAN-60W, the printed circuit board in 3D

    PS GAN-60W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    89 parts4MIT
  • 6 layers56.7 × 54.7 mmBetter md80, the printed circuit board in 3D

    Better md80

    darshp848/bldc-controller-60v

    60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.

    144 parts1
  • 4 layers100 × 99.4 mmMPPT V3, the printed circuit board in 3D

    MPPT V3

    hazzalemon/MPPTV3_board

    3rd revision of the MPPT solar charge controller PCB design

    204 parts1
  • 2 layers40 × 72 mmBCU, the printed circuit board in 3D

    BCU

    Coilchain/Coilchain-Hardware

    70 partsApache-2.0
  • 4 layers71.8 × 70.7 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ishaansalian/dash-motor-controller

    Motor control PCB for the Dash humanoid robot project.

    79 parts
  • 4 layers100 × 100 mmPower feed, the printed circuit board in 3D

    Power feed

    liorknafo/power-feed-manual-mill

    DIY stepper power feed for a SIEG X3.5D mill: electromagnetic clutch, RP2040 controller PCB, Rust firmware, build123d CAD

    195 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the LM5164DDAR?

Yes. The symbol is Regulator_Switching:LM5164DDA and the footprint Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM5164DDAR?

SO-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the LM5164DDAR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM5164DDAR?

JLCPCB lists it as part C477928, with 2,780 in stock; the sellers' links on this page open their listings.

What can replace the LM5164DDAR?

Parts like it in the library: the LM5164DDAT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM5164DDAR?

22 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.