Skip to the content
2 layers30 × 122 mmCampus hub, the printed circuit board in 3D

mechanical keyboard conversion for a framework 13

Size
30 × 122 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
153
Pads
354
Tracks, vias
983, 123
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Sep 2026
Updated
7 Sep 2026

Overview

Campus hub is an open-source printed circuit board by flurples, from the flurples/campus repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 122 mm with 66 parts on 153 nets, routed with 983 tracks and 123 vias.

It is built around the TPS62901RPJR, USB2244-AEZG-06 and USB5744/2G, with the TUSB1046-DCIRNQR among its other parts. Its parts include 34 capacitors, 14 resistors, 6 connectors, 4 ICs and 2 crystals.

Main components

4

README

README.md

campus

mechanical keyboard conversion for a framework 13

IMG_3377-adjusted build video: https://youtu.be/kGHAUogFsYY

about

campus is designed to be a drop-in replacement housing for a framework 13 that features a hhkb layout kailh choc mechanical keyboard.

you will need

  • a framework 13 laptop
bottom chassis parts
  • bottom chassis (cnc)
  • bottom-bracket-R, L & M (3d print)
input cover parts
  • input cover (cnc)
  • plate (cnc)
  • 3x knobs (cnc)
  • 1x touchpad-clamp-R & L (3d print)
  • 2x touchpad-clamp-top (3d print)
lid parts
  • lid (cnc)
  • bezel (3d print)
  • lid-corner-cap-R & L (3d print)
other hardware
  • 60x kailh choc switches
  • choc stabilizers (2x 2u, 1x 6.25u)
  • compatible keycaps (be sure to get 6.25u space, 1.75u shift, etc)
  • 3x ec12 low profile encoders
  • m1.6 x 3mm heat set inserts
  • m2 x 4mm heat set inserts
  • m2 x 2.5mm heat set inserts
  • 5x m2 x 20mm flat head hex screws (to screw the chassis together)
  • 3x m2 x 8mm set screws (for the knobs)
  • 4x 1" OD rubber bumpers
  • variety of double sided tapes
  • epoxy

build notes

bottom chassis, input cover, lid, knobs, and plate were cnc'd from aluminum. all 3d printed parts were printed in petg to avoid breaking down over the years. heat set inserts for screw holes to mount factory components are installed into the bottom-brackets, which are then epoxied to the bottom-chassis. due to jlcpcb's minimum thickness requirements, the input and lid do not use heat set inserts. instead, the aluminum is directly tapped.

the keyboard workaround

the usb hub was too complex and I wasn't able to get it working. because the keyboard was originally meant to connect internally through the usb hub, I ended up simply bypassing the usb hub entirely, bypassing it with a unified daughterboard s1. in case anyone wants to attempt to diagnose why, I've uploaded the kicad files as is for reference.

disclaimer

campus is a highly involved project and will require completely tearing down your framework laptop and transplanting all the components into an objectively worse-designed chassis than the factory framework chassis. some features will be lost, for example, the privacy switches built into the webcam module, or the little buttons that lock the expansion cards in place. I am not a professional electronics designer, so expect to perform some janky workarounds to get the laptop functioning as it should. I am not responsible for any issues you may encounter with the build, so please use the files with caution.

I do not sell any products, and I am not affiliated with any vendors who claim to sell my designs. if you choose to support these vendors, I am not responsible for any issues you may encounter with them.

gallery

IMG_3318 IMG_3347 IMG_3354 IMG_3349 IMG_3359 IMG_3319 IMG_E3424

Parts

66
QtyValueFootprintReferences
230.1uFCapacitor_SMD:C_0805_2012MetricC10, C11, C12, C15, C16, C17, C19, C20, C21, C22, C25, C26, C27, C28, C29, C31 +7
710kResistor_SMD:R_0805_2012MetricR6, R7, R8, R9, R10, R14, R15
422pFCapacitor_SMD:C_0805_2012MetricC23, C24, C33, C34
20.33uFCapacitor_SMD:C_0805_2012MetricC5, C6
212kResistor_SMD:R_0805_2012MetricR4, R12
24.7uFCapacitor_SMD:C_0805_2012MetricC18, C30
2CrystalCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1, Y2
2USB3_Acampus-parts:692121230100J2, J3
110uFCapacitor_SMD:C_0805_2012MetricC9
1113kResistor_SMD:R_0805_2012MetricR3
11MResistor_SMD:R_0805_2012MetricR5
11uFCapacitor_SMD:C_0805_2012MetricC13
11uHInductor_SMD:L_1008_2520MetricL1
122uFCapacitor_SMD:C_0805_2012MetricC14
124.9kResistor_SMD:R_0805_2012MetricR2
133Resistor_SMD:R_0805_2012MetricR11
15.1kResistor_SMD:R_0805_2012MetricR1
18Padcampus-parts:8PadH1
1Conn_01x04Connector_Molex:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_VerticalJ1
1HDMI_Acampus-parts:SAMESKY_HD07-19-RVS-MSMT-TRJ5
1LOGOcampus-parts:campus-3mmG***
1Micro_SD_Cardcampus-parts:104031-0811_MOLJ4
1TPS62901RPJRcampus-parts:QFN_902RPJR_TEXU3
1TUSB1046-DCIRNQRcampus-parts:RNQ40_TEXU1
1USB2244-AEZG-06campus-parts:QFN36_6X6MC_MCHU4
1USB5744/2Gcampus-parts:VQFN56_2G_MCHU2
1USB_C_Plugcampus-parts:MOLEX_1054440001P1

The 63 most common of 66 parts.

More from flurples/campus

1
  • 2 layers307 × 85 mmCampus keyboard, the printed circuit board in 3D

    Campus keyboard

    flurples/campus

    mechanical keyboard conversion for a framework 13

    293 parts41GPL-3.0

Similar boards

  • 6 layers100 × 100 mmUsb power board, the printed circuit board in 3D

    Usb power board

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    409 parts5Apache-2.0
  • 4 layers150 × 112 mmBoard v3-83pct, the printed circuit board in 3D

    Board v3-83pct

    dmz006/brain-drain

    Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

    302 parts2
  • 6 layersFcBoard, the printed circuit board in 3D

    FcBoard

    raonslab2/fcBoardKicad

    ACU5EV (Zynq UltraScale+ XCZU5EV) SoM용 캐리어 보드 KiCad 프로젝트

    45 parts
  • 4 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    183 parts
  • 4 layers80 × 86 mmESP C5-CAN SNIFFER, the printed circuit board in 3D

    ESP C5-CAN SNIFFER

    sundevilmotorsports/pcb-dev

    PCB development repository

    73 parts3
  • 4 layers71 × 75 mmAS 3, the printed circuit board in 3D

    AS 3

    beaked99/air-scales

    2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.

    92 parts
  • 6 layers220 × 100 mmMotion card placement, the printed circuit board in 3D

    Motion card placement

    DeadlySIn777/Controller

    Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review

    203 parts
  • 4 layers55 × 97 mmMelodio SelfMate V2, the printed circuit board in 3D

    Melodio SelfMate V2

    zeeblaze/Melodio-SelfMate

    Your Ultimate Portable Music Companion For Home Automation.

    121 parts53

Questions

How big is the Campus hub PCB?

It measures 30 × 122 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Campus hub use?

66 parts, built around the TPS62901RPJR, USB2244-AEZG-06, USB5744/2G and TUSB1046-DCIRNQR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Campus hub KiCad files?

From the flurples/campus repository on GitHub, at the commit this page was made from: the board is pcb/campus-hub/campus-hub.kicad_pcb and its schematic pcb/campus-hub/campus-hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Campus hub design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).