
Melodio NavWheel
zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.

Your Ultimate Portable Music Companion For Home Automation.
Melodio SelfMate V2 is an open-source printed circuit board by zeeblaze, from the zeeblaze/Melodio-SelfMate repository on GitHub. It is a 4-layer board of 55 × 97 mm with 121 parts on 151 nets, routed with 733 tracks and 131 vias.
It is built around the TPA6130A2RTJR, USB2244-AEZG-06 and AP2112K-3.3, with the BQ24075RGT, MPU-6500 and PCM5102PW among its other parts. Its parts include 47 capacitors, 37 resistors, 12 ICs, 6 connectors and 6 switches. It belongs with the ESP32 boards of this library.
Melodio Self-Mate is a cutting-edge portable electronic device designed to revolutionize your music experience. At its core lies the powerful ESP32-S3, providing unparalleled performance and versatility. This innovative gadget seamlessly combines music playback, Spotify streaming, and programmability, making it the go-to choice for music enthusiasts and programmers that wants to look into how smart devices work.
This portable programmable device packs a lot into its little brain, including and not Limited to, IR(receiver and transmitter), High speed mass storage, SD card, touch wheel technology, USB switch, which gives it a endless possibility of what is achievable with it.
ESP32-S3: Melodio makes use of ESP32-S3 as its heart which ensures high-performance and efficiency, enabling a seamless user experience.
DAC: Melodio uses the high quality TI PCM5102A 32bit, 348kHz, 112dB audio stereo DAC to output digital audio signal coming from the ESP32-S3 as analog signal for the headphone amplifier.
HEADPHONE AMP: High quality analog audio signal coming from the PCM5102A is received by yet another high quality headphone amplifier from Texas Instrument, TI TPA6130A2 138-mW stereo analog input headphone amplifier with I2C control interface, which then output its amplified audio signal to a headphone jack. The I2c control interface of this amplifier allows the volume of the amplifier output audio to be controlled from the software.
DISPLAY: Melodio implements a 1.8 inch 128x160 ST7735 TFT display as a visual interface.
MASS STORAGE
USB SWITCH
BUTTONS: There are four buttons on the side of Melodio:
Volume Up Volume Down Boot_0(for entering programming mode) Reset Volume Up and Volume Down buttons control the headphone amp directly from software, so their functionalities can be altered and hardcode the amplifier volume directly from software.
SLIDER SWITCHES
SPOTIFY CONNECT
MUSIC PLAYER
STEMMA QT CONNECTOR
IR (Transmitter and Receiver)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C12, C17, C19, C21, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33 +6 |
| 18 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R11, R14, R17, R18, R21, R22, R23, R25, R26, R27, R28, R29, R33, R34 +2 |
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C8, C9, C10, C20, C22, C35 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C40, C41, C42, C43, C45, C46, C47 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R12, R15, R31, R32 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R5, R6, R35, R36 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C11, C13 |
| 3 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 1k1 | Resistor_SMD:R_0402_1005Metric | R24, R30 |
| 2 | 1mR | Resistor_SMD:R_0402_1005Metric | R7, R16 |
| 2 | 2n2 | Capacitor_SMD:C_0402_1005Metric | C14, C16 |
| 2 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U9, U12 |
| 2 | DNP | Capacitor_SMD:C_0402_1005Metric | C15, C18 |
| 2 | RED | LED_SMD:LED_0402_1005Metric | D3, D4 |
| 2 | SW_USB | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW3, SW6 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 24MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | BATTERY_CONN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_EVQP7C | SW1 |
| 1 | BQ24075RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U10 |
| 1 | ESP32-S3-WROOM-1-N4R4 | Melodio-SelfMate-V2:ESP32-S3-WROOM-1-N8R8 | U2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D5 |
| 1 | MPU-6500 | Melodio-SelfMate-V2:MPU-6500 | U4 |
| 1 | Micro_SD_Card_Det2 | Melodio-SelfMate-V2:MOLEX_503398-1892 | J6 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Qtouch | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J5 |
| 1 | RST | Button_Switch_SMD:SW_SPST_EVQP7C | SW2 |
| 1 | SFH4346 | Melodio-SelfMate-V2:LED_5mm_Side_Mount | D2 |
| 1 | STEMMA_QT | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J1 |
| 1 | TPA6130A2RTJR | Melodio-SelfMate-V2:TPA6130A2RTJR | U5 |
| 1 | USB2244-AEZG-06 | Melodio-SelfMate-V2:USB2244-AEZG-06 | U6 |
| 1 | USB3740B-AI2 | Package_DFN_QFN:UQFN-10_1.3x1.8mm_P0.4mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | VOL_DOWN | Button_Switch_SMD:SW_SPST_EVQP7C | SW5 |
| 1 | VOL_UP | Button_Switch_SMD:SW_SPST_EVQP7C | SW4 |
| 1 | ~ | Melodio-SelfMate-V2:1.8inch_TFT_128x160 | U8 |
| 1 | ~ | Melodio-SelfMate-V2:IRM-V838M3-C-TR1 | U7 |
| 1 | ~ | Melodio-SelfMate-V2:SMD_PJ-399E-6A | J2 |
| 1 | ~ | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm | U11 |

zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.


bnahill/audiopulse-embedded
Miniature DPOAE infant hearing loss screening device

alx-alexpark/radio-keychain
It uses the connected headphones as an antenna, and is powered off a CR2032 coin cell. The FM tuner used is the Si4702, which supports the 76-108MHz frequency range.


LastZactionHero/infinite-keyboard
Infinite Keyboard is a portable musical scratchpad. It continously captures of every note played on the integrated keyboard as MIDI data, saved directly to an SD card.

tracelabs-pcb/usb-audio-interface
USB-C Audio Interface PCB — UAC2, Headset, Mic Preamp — KiCad 4-Layer

hnz1102/shared-usb-memory
USB Memory with One-touch Switching Between Two Device Connections

lukasznowarkiewicz/M2SmartHome
Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.
It measures 55 × 97 mm and has 4 copper layers, 1.6 mm thick.
121 parts, built around the TPA6130A2RTJR, USB2244-AEZG-06, AP2112K-3.3 and BQ24075RGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zeeblaze/Melodio-SelfMate repository on GitHub, at the commit this page was made from: the board is Melodio-SelfMate-V2.kicad_pcb and its schematic Melodio-NavWheel/Melodio-NavWheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zeeblaze before reusing the design.