Skip to the content
4 layers150.7 × 92.4 mmMasterControlUnit, the printed circuit board in 3D

MasterControlUnit

catinella/HILO1

Hardware In the LOop

Size
150.7 × 92.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
46
Nets
183
Pads
397
Tracks, vias
1,384, 117
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Jun 2025
Updated
28 Oct 2026

Overview

MasterControlUnit is an open-source printed circuit board by catinella, from the catinella/HILO repository on GitHub. It is a 4-layer board of 150.7 × 92.4 mm with 46 parts on 183 nets, routed with 1,384 tracks and 117 vias.

It is built around the ESP32-DEVKITC-VE, ADA4096-2ARMZ and APS6404L-3SQR-SN, with the 74HC138 among its other parts. Its parts include 17 ICs, 14 capacitors, 9 resistors and 3 connectors. It belongs with the ESP32 and STM32 boards of this library.

Main components

4

README

README.md

Project's banner

1.0 Files

Files/DirsDescription
firmwareThe firmware for manager MCU
PCBAll the PCBs used in the project
consoleThe software used to manage the HILO
imagesImages and diagrams used by README.md
lgpl-3.0.txtL-GPL ver 3.0 license document

2.0 Decription

The goal of this project is to get a device that allows the user to test an electronic system in an easy way, also remotely. In the 1990 when I was studying at high scool, who was developing new devices, used generic boxes with buttons, switches, LEDs, displays.... installed on it. This device allowed him to emulate the external environment.

 Testing device

It could look like useful for hobbyist, but it is an expensive, big, uncomfortable device, usually. For professional using it is not an adequate solution, because td does not allow you to see what happens in very short time slots. For example, you need to monitor a 8bit bus behaviour after one millisecond after some digital input signal. In this case, this kind of devices is absolutely unuseful. Unfortunately, many Italian companies still use the same deplorable methodology, today too! Their test plans do not respect the V-model, and their firmware developers have to work on-site only.

But the smarter companies use advanced and complicated devices that allow them to test their electronic products remotely, in deeper and easier way. These tools are very sophisticated and programmable simulator, where they can simulate the external environment in realistic and reliable way. These tools' class is called HILO (Hardware In the LOop).

This project aims to provide a low-cost and very very simple HILO. This one offers less and more limited features, obviously.

2.1 Test mode vs interactive mode

This HILO has two operating modes, that the user can set using the tester client GUI. In the first one (test-mode), the user can monitor the DUT behavior for output-pins activities that run fast or for a short time periods. In the second one the user can change the HILO's output-pins, directly, and verifies the DUT's behavior as consequence.

  • Test mode: the user has to create a DUT test-recepit where he has to define the HILO's output-pins values, when they change during the test, and the max frequency of the changes. This synchronization will be also used to read the HILO's input-pins. Before to start the test, the HILO will convert the pin-status changes definitions in a scheduled output data sequence. When this raw-data sequence is ready, a bit configuration will be sent to the output-pins on every chock pulse, and the input pins will be read.

  • Interactive mode: In this mode, the user will be able to change the HILO's output-pins values and check for the input ones status, interactively. It is a good way to get an overview on the DUT's behavior, but, because you cannot schedule the changes with a precise time, it is not adequate for real-time interactions.

2.3 Communication channel

In order to get a very fast, relayable, and flexible communication channel between the test-client software and the HILO's interface, TCP/IP limk has been selected. In fact, it allows a huge transfer rate, a very high quality error checking and retransmission, and virtually-infinite distances. It allows the test operator to work remotely respect to the HILO device, and the DUT, bviousely. In order to make the HILO device using as comfotable as possible, WiFI connection has been selected. In this way the test operator can set its own test-desk without to take care of boring cables to connect to it.

2.4 Functional scheme overview:

overview_diagram

2.5 Licence:

This project is a free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 3.0 of the License, or (at your option) any later version.

For further details please read the full LGPL text file. You should find a copy of the GNU General Public License document in the root folder of the project; if not, write to the

text
Free Software Foundation, Inc.,
59 Temple Place, Suite 330,
Boston, MA  02111-1307  USA

Parts

46
QtyValueFootprintReferences
10100nFCapacitor_SMD:C_1206_3216MetricC3, C4, C5, C6, C7, C8, C9, C10, C11, C12
10APS6404L-3SQR-SNAPS6404L-3SQR-SN:APS6404L-3SQR-SN_APYU2, U3, U4, U6, U7, U8, U9, U10, U11, U12
3Conn_02x09_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_VerticalDirControl_1, FusesStatus_1, I/O-LinesToMicro_1
210nFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
210uFCapacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mmC13, C14
212KResistor_SMD:R_1206_3216MetricR4, R5
21KResistor_SMD:R_1206_3216MetricR6, R7
222KResistor_SMD:R_1206_3216MetricR8, R9
24.7KResistor_SMD:R_1206_3216MetricR2, R3
274HC13874HC138:SOIC127P600X175-16NU13, U14
1100KResistor_SMD:R_1206_3216MetricR1
1ADA4096-2ARMZADA4096-2ARMZ:RM_8_ADIU17
1An-INConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1ESP32-DevKitCEspressif:ESP32-DevKitCU16
1LD1117S33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1MCP23017_SOPackage_SO:SOIC-28W_7.5x17.9mm_P1.27mmU15
1Reset ButtonConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1STM32F407G-DISC1STM32F407G-DISC1:MODULE_STM32F407G-DISC1U1
1Start ButtonConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2

More from catinella/HILO

2

Similar boards

  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 4 layers17.8 × 38.1 mmReDIP SID, the printed circuit board in 3D

    ReDIP SID

    daglem/reDIP-SID

    MOS 6581 / 8580 SID FPGA emulation platform

    103 parts121
  • 4 layers105 × 60 mmPicocart64 v2, the printed circuit board in 3D

    Picocart64 v2

    khill25/Dreamdrive

    Open source Retro Rom Carts and ODEs by Dreamcraft Industries

    162 parts26
  • 4 layers56 × 87.8 mmPicogus104, the printed circuit board in 3D

    Picogus104

    UzixLS/picogus104

    PicoGUS sound card for PC/104 interface

    114 parts23
  • 2 layers30.7 × 20 mmQspi pmod, the printed circuit board in 3D

    Qspi pmod

    mole99/qspi-pmod

    A QSPI Pmod board designed in KiCad containing one Flash and two SPRAMs

    15 parts16Apache-2.0
  • 4 layers62.8 × 61.7 mmCf mp3-player, the printed circuit board in 3D

    Cf mp3-player

    will127534/cf-mp3-player

    A simple MP3/WAV/FLAC player using CF card

    119 parts16MIT
  • 6 layers44.5 × 36 mmDefcon-34-v3, the printed circuit board in 3D

    Defcon-34-v3

    bunnie/dc34-core-hw

    Core module hardware design

    187 parts10CERN-OHL-W-2.0
  • 4 layers40 × 16 mmIce dongle, the printed circuit board in 3D

    Ice dongle

    emeb/ice-dongle

    USB-C Dongle with ice40 UP5k FPGA

    48 parts7MIT

Questions

How big is the MasterControlUnit PCB?

It measures 150.7 × 92.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the MasterControlUnit use?

46 parts, built around the ESP32-DEVKITC-VE, ADA4096-2ARMZ, APS6404L-3SQR-SN and 74HC138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MasterControlUnit KiCad files?

From the catinella/HILO repository on GitHub, at the commit this page was made from: the board is PCB/MasterControlUnit/main.kicad_pcb and its schematic PCB/ElectricProtections/fuses.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MasterControlUnit design in my own project?

Its repository states no licence, so its author keeps all rights: ask catinella before reusing the design.