
Dabao v3c sdcard
Supermagnum/Galdralag-firmware
A cryptographic framework for Baochip-1x .

Core module hardware design
Defcon-34-v3 is an open-source printed circuit board by bunnie, from the bunnie/dc34-core-hw repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 6-layer board of 44.5 × 36 mm with 187 parts on 123 nets, routed with 1,854 tracks and 413 vias.
It is built around the MT3406, MT3608 and ZD25Q64BSIGT, with the APS6404L-3SQR-SN, EMS4000RSW and SN74LVC1G04DCKR among its other parts. Its parts include 50 capacitors, 37 resistors, 15 diodes, 12 ICs and 9 transistors.
This contains the KiCAD files for the core module hardware design.
See defcon's support page for more details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | TestPoint | common:TestPoint_Pad_D1.2mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +16 |
| 17 | 0.1uF, 10V, X5R | Capacitor_SMD:C_0201_0603Metric | C1, C2, C5, C6, C19, C22, C24, C27, C28, C37, C38, C39, C40, C41, C43, C69 +1 |
| 11 | ESD5451N-MS | Diode_SMD:D_SOD-882D | D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 7 | 22uF, 6.3V, X5R | Capacitor_SMD:C_0603_1608Metric | C4, C8, C10, C12, C26, C35, C46 |
| 6 | 0 ohm | Resistor_SMD:R_0402_1005Metric | R20, R24, R32, R33, R34, R35 |
| 6 | 100k, 1% | Resistor_SMD:R_0201_0603Metric | R8, R10, R19, R29, R31, R36 |
| 6 | DMG1012T | common:SOT-523-B | Q1, Q4, Q5, Q6, Q7, Q8 |
| 5 | 1.0uF, 10V, X5R | Capacitor_SMD:C_0201_0603Metric | C7, C21, C29, C31, C56 |
| 5 | 10uF, 6.3V, X5R | Capacitor_SMD:C_0402_1005Metric | C11, C18, C36, C61, C63 |
| 5 | 2.2uF, 6.3V, X5R | Capacitor_SMD:C_0201_0603Metric | C17, C20, C23, C25, C30 |
| 5 | 22pF C0G | Capacitor_SMD:C_0201_0603Metric | C3, C13, C14, C32, C33 |
| 4 | 1N5819WS | common:D_SOD-323-B | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 10k, 1% | Resistor_SMD:R_0201_0603Metric | R9, R26, R28 |
| 3 | 2.2k, 1% | Resistor_SMD:R_0402_1005Metric | R3, R4, R11 |
| 3 | 2.2uH, >1A | Inductor_SMD:L_0805_2012Metric | L1, L4, L5 |
| 3 | MT3406 | Package_TO_SOT_SMD:SOT-23-5 | U4, U9, U10 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT3, NT4, NT5 |
| 3 | SW_Push | common:SW_Push_1P1T_XKB_TS-1187A | SW3, SW4, SW5 |
| 2 | 100 ohm | Resistor_SMD:R_0402_1005Metric | R2, R6 |
| 2 | 22k, 1% | Resistor_SMD:R_0201_0603Metric | R22, R27 |
| 2 | 33pF C0G | Capacitor_SMD:C_0201_0603Metric | C15, C16 |
| 2 | 4.7M | Resistor_SMD:R_0402_1005Metric | R12, R16 |
| 2 | 5.1k, 1% | Resistor_SMD:R_0402_1005Metric | R23, R30 |
| 2 | Fiducial | common:IRIS fiducial 0.4mm | FID1, FID2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U6, U7 |
| 1 | 1 ohm | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 10uF, 25V, X5R | Capacitor_SMD:C_0603_1608Metric | C68 |
| 1 | 10uH 1.35A | Inductor_SMD:L_APV_ANR252012 | L2 |
| 1 | 130k, 1% | Resistor_SMD:R_0201_0603Metric | R14 |
| 1 | 1500pF, 50V, X7R | Capacitor_SMD:C_0402_1005Metric | C67 |
| 1 | 18.2k, 1% | Resistor_SMD:R_0201_0603Metric | R13 |
| 1 | 200k, 1% | Resistor_SMD:R_0201_0603Metric | R18 |
| 1 | 22uF, 25V, X5R | Capacitor_SMD:C_0805_2012Metric | C34 |
| 1 | 26-pin FPC | common:HRS_FH34SRJ-26S-0.5SH(50) | P1 |
| 1 | 2x6 male 2mm | Connector_PinHeader_2.00mm:PinHeader_2x06_P2.00mm_Vertical | J6 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm | Y2 |
| 1 | 33k, 1% | Resistor_SMD:R_0201_0603Metric | R15 |
| 1 | 4.7uF, 25V, X5R | Capacitor_SMD:C_0805_2012Metric | C52 |
| 1 | 4.7uH 2A FTC252010S4R7MBCA | Inductor_SMD:L_1008_2520Metric | L3 |
| 1 | 43.2k, 1% | Resistor_SMD:R_0201_0603Metric | R7 |
| 1 | 470k, 1% | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 47k, 1% | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 48.000MHz / Y322548MLBCX | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 510, 1% | Resistor_SMD:R_0201_0603Metric | R44 |
| 1 | 6.8k, 1% | Resistor_SMD:R_0201_0603Metric | R25 |
| 1 | 750k, 1% | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | AO3415A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | APS6404L-3SQR-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BAO1X2S4F | common:WLCSP-71_9x8_4.062x3.762mm | U8 |
| 1 | CH112OL001A V0 | common:ER-OLED-1.12_BACKSIDE-1.5mm-offset | DS1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | EMS4000RSW | common:QFN-10_1.4x1.8_Pitch0.4mm | U11 |
| 1 | Fiducial | common:IRIS fiducial2 0.4mm | FID3 |
| 1 | Haoyu TS-1513B | common:TS-1513B | SW2 |
| 1 | JTD2301 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | LIS2DH12TR | Package_LGA:LGA-12_2x2mm_P0.5mm | U5 |
| 1 | LML-GC2145-66DQR | common:GC2145-lens-up | NT1 |
| 1 | SI2302-2.3A | Package_TO_SOT_SMD:SOT-23 | Q9 |
| 1 | SN74LVC1G04DCKR | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U12 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SW_Push | common:TS24CA | SW1 |
| 1 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP8 |
| 1 | USB_C_Receptacle_USB2.0_16P | common:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | ZD25Q64BSIGT | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | ~ | common:HRS_FH34SRJ-24S-0.5SH(50) | CM1 |

Supermagnum/Galdralag-firmware
A cryptographic framework for Baochip-1x .

Oscyloskop444/Omni-Rover
Micro size rover base with mecanum omni wheels for diverse movement possibilities featuring GPIO and I2C bus expansion ports to use with future attachments secured on its top.

jlcjak/neurband
Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.

callumsnowden/emfkart
A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.

betz-engineering/ui_board_1u
User interface PCB for 1U chassis front-panels

lrodorigo/heishamon-lr-aquarea-board
A simple alternative hardware implementation for the great HeishaMon board for communicating with Panasonic heatpumps


misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
It measures 44.5 × 36 mm and has 6 copper layers, 0.8 mm thick.
187 parts, built around the MT3406, MT3608, ZD25Q64BSIGT and APS6404L-3SQR-SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bunnie/dc34-core-hw repository on GitHub, at the commit this page was made from: the board is defcon-34-v3.kicad_pcb and its schematic daric.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).