2 layers80 × 30 mm
Interfaces and adapters
7,328 boards- 2 layers30 × 25 mm
- 2 layers27 × 30 mm
- 2 layers41 × 41 mm
Tmc2208-adapter
pedrominatel/esp-rcnow
ESP-IDF project for remote control based on the ESP-NOW protocol.
7 partsApache-2.0 - 2 layers50 × 70 mm
- 4 layers56 × 65 mm
- 4 layers56 × 65 mm
RPi interface
pete4radio/SAMWISE-1-2-HW-Training
SAMWISE boards existing or newly ordered March 2025
47 parts - 4 layers100 × 50 mm
USB Hub
Phil-CIA/Development-Station-Power-Supply
3 channel bench supply with current and voltage plotting
82 parts - 4 layers42 × 58 mm
OpenROV Topside Interface 2.6A
PhilipMcGaw/robot-NautiPi
NautiPi is the physical hardware and embedded-project repository for the robot projects. It contains electronics, PCB and KiCad work, Arduino projects, component records, mechanical references, photographs, and retained…
20 parts - 2 layers14 × 35 mm
Programmer
PHS-SMCS/Falconia-Beacon
Falconia Beacon is an ATTINY816-based, CR2032-powered LED beacon board used to make the Falconia rover visible to the SMCS Pi-in-the-sky satellite.
13 parts - 2 layers19.4 × 21.4 mm
Xiao rp gpio adapter
phyreact/reactor
Robots that help AI sense and interact with the physical world.
2 parts - 2 layers19.4 × 21.4 mm
Xiao s3 gpio adapter
phyreact/reactor
Robots that help AI sense and interact with the physical world.
2 parts - 2 layers136.8 × 33.5 mm
Adapter board
picafe/bicolor-matrix
A 32x8 bicolor LED matrix module based on the Holtek HT16K33A LED driver.
9 parts - 2 layers21.6 × 19 mm
Breakout 10TSSOP
piercehowell/DIGIMUSER
Digital vocal effect processor "stompbox" that applies a variety of real-time signal processing algorithms to alther the voice of a singer.
4 partsMIT - 2 layers148.9 × 56 mm
- 2 layers41.4 × 11.2 mm
TTGO T Call
poesel/Power_DS3231_Adapter
A small adapter board to switch power with a DS3231 breakout board
6 partsMIT - 2 layers90 × 55 mm
USB HUB
poggersv2/Card-Tools
I decided on the macro pad because I use software that requires alot of shortcuts (and also because I'm lazy lol).
29 parts - 2 layers21.6 × 22.9 mm
- 2 layers26.5 × 40 mm
- 2 layers66 × 55.9 mm
Comm Bridge
Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge
Bridge circuit for several peripheral
98 parts - 2 layers34.3 × 99.7 mm
Truss connector breakout
practable/truss
The truss remote laboratory has been designed for use with Structural Engineering and Engineering Design courses at the University of Edinburgh.
14 partsAGPL-3.0 - 4 layers175 × 155 mm
Contact router
pratham-cloud-ctrl/Project-SCCI-RH
A digital spinal cord-computer interface concept: research, eight KiCad boards, nRF5340 firmware and FreeCAD assemblies.
159 parts - 4 layers155 × 150 mm
Controller carrier
pratham-cloud-ctrl/Project-SCCI-RH
A digital spinal cord-computer interface concept: research, eight KiCad boards, nRF5340 firmware and FreeCAD assemblies.
72 parts - 4 layers175 × 155 mm
Current driver
pratham-cloud-ctrl/Project-SCCI-RH
A digital spinal cord-computer interface concept: research, eight KiCad boards, nRF5340 firmware and FreeCAD assemblies.
160 parts