Interfaces and adapters

7,328 boards

4 layers119.6 × 99.2 mm
TVS Adapter v1
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
179 parts1
2 layers
Pickit adapter
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
4 parts1
2 layers167.5 × 48 mm
Pwr breakout
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
36 parts1
4 layers99.5 × 75.2 mm
RCP PWM breakout
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
135 parts1
2 layers99 × 99 mm
Sunlord breakout
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
49 parts1
2 layers67.3 × 30.5 mm
2364 Flash ROM programmer rev 3
RetroNynjah/2364-Flash-ROM
Reprogrammable 2364 ROM replacement
6 parts1GPL-3.0
2 layers73.7 × 33 mm
MD Flash Cartridge programming Adapter Rev 4
RetroNynjah/MD-SMD-reflashable
Magic Desk 64 reflashable SMD version
5 parts1GPL-3.0
2 layers90.2 × 97.3 mm
Teensy40-bb hc05-adapter
rjhsun/nibelung
Teensy 4.0 WS8211 LED Controller
163 parts1MIT
2 layers18 × 56.1 mm
Teensy40-breakout board
rjhsun/nibelung
Teensy 4.0 WS8211 LED Controller
4 parts1MIT
2 layers10.9 × 12.3 mm
Teensy40-sd adapter
rjhsun/nibelung
Teensy 4.0 WS8211 LED Controller
3 parts1MIT
2 layers
Rectifier bridge ac dc
rnascunha/kicad-libs
Kicad libs with spice models, 3Ds and others
7 parts1MIT
2 layers149.9 × 139.7 mm
GIMIX intelligent 3 port Serial
roberto314/GIMIX_reproduction
Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard
72 parts1BSD-2-Clause
2 layers132.4 × 88.4 mm
GIMIX Serial dumb
roberto314/GIMIX_reproduction
Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard
48 parts1BSD-2-Clause
2 layers17 × 32.1 mm
Bidirectional level shifters
robertrico/hardware
Personal embedded systems portfolio — circuits, firmware, and physical builds. Each project showcases a hardware concept, toolchain, or interface.
6 parts1
4 layers91.1 × 64.4 mm
Link101 carrier
robocore-labs/link101-hardware
link101 is a multi-protocol USB interface board. One Type-C cable gives you CAN-FD, RS485, Dynamixel, Feetech, UART, I2C, and MIT Cheetah-protocol ports, all as stable Linux devices.
49 parts1CERN-OHL-S-2.0
2 layers67.5 × 45 mm
BNO BREAKOUT
robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.
17 parts1GPL-2.0
2 layers31.4 × 49 mm
BNO BREAKOUT
robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.
14 parts1GPL-2.0
2 layers42 × 61.1 mm
BNO BREAKOUT
robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.
20 parts1GPL-2.0
2 layers22 × 23 mm
Encoder Level Shifter
robotronik/cdfr2019-2A-Electronic

12 parts1
2 layers60 × 35 mm
Motor Adapter
robotronik/cdfr2019-2A-Electronic

10 parts1
2 layers189.6 × 14.6 mm
Arm interface board mirrored
Roboy/Arm_interface_board
Board containing all the control units and power distribution for the servos in the arms.
65 parts1
2 layers57.4 × 54.7 mm
Charge test
RockyMtnWolf/PY32-BQ25798-SolarCap-Charger
Solar MPPT supercapacitor charger: PY32F003 + TI BQ25798. KiCad hardware (core board + test baseboard) and firmware with UART AT-command runtime configuration.
20 parts1AGPL-3.0
4 layers255.9 × 224.5 mm
Central control unit
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
929 parts1
2 layers36.2 × 33.7 mm
Connecting connector-1-wire
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
15 parts1