2 layers40 × 50 mm
Ms9282 carrier adapter
parzivail/dxc3000-hdmi
MS9282-based HDMI conversion module for the Sony DXC-3000(A)
18 parts1CERN-OHL-P-2.0
Interfaces and adapters
7,328 boards- 2 layers150 × 45 mm
Smu front
PaulBichl/vibepcb-smu
VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM
22 parts1 - 2 layers41.4 × 64 mm
WIZnet adapter
Pconst167/sol-1
Sol-1 is a homebrew CPU and Minicomputer built from 74HC logic. It is published here for educational purposes.
3 parts1 - 2 layers40 × 56.1 mm
NFC Programmer
pedrotrenado/programador-NFC
Este proyecto tiene como objetivo el diseño e implementación de un sistema electrónico para la actualización del firmware de sensores a través de la tecnología NFC (Near Field Communication).
41 parts1 - 2 layers20 × 38.1 mm
Debug Adapter
PicoballoonLabs/Debug-Boards
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
34 parts1MIT - 2 layers46 × 59 mm
- 2 layers50 × 57 mm
RobustEEG Adapter
ppolGTMonster/RobustEEG_forUHFMRI
Hardware for an Open Source EEG usable in high magnetic Fields
4 parts1 - 2 layers50 × 50 mm
Stm32f765-breakout board
Prachannagven/stm32f765-facial-detection
A project built around the STM32F765VIT6 chip to perform basic facial detection and to act as a flight controller for a micro drone.
45 parts1 - 2 layers37.8 × 25.1 mm
0xjmux ESP PROG Adapter ESPPROG Adapter
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
11 parts1 - 2 layers48 × 41 mm
Bbogush nand programmer nand programmator
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
42 parts1 - 2 layers56.1 × 35.8 mm
Jana Marie EF S Adapter lensmount v1.1
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
40 parts1 - 2 layers61.7 × 26.9 mm
Jana Marie hoverboard breakout bobbycar
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
29 parts1 - 2 layers37.6 × 16.1 mm
Jana Marie USB I2C BRIDGE USB I2C BRIDGE
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
17 parts1 - 4 layers18 × 149 mm
Miceuz rs485-moist sensor rs485-moist sensor
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
31 parts1 - 2 layers44.1 × 35.3 mm
- 2 layers139.1 × 55.1 mm
- 2 layers20.3 × 15.3 mm
- 4 layers95 × 95 mm
- 2 layers38.1 × 31.8 mm
ESP-012 adapter
raspibo/nckicad
Raccolta di informazioni, progetti Kicad, utilizzata durante il non-corso Kicad di Raspibo.
8 parts1 - 2 layers25.4 × 42.9 mm
- 2 layers100 × 79 mm
NX J401-Adapter
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
36 parts1 - 2 layers120 × 79 mm
NX J401-Adapter
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
80 parts1 - 4 layers120.3 × 79 mm
NX J401-Adapter v7
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
136 parts1 - 4 layers140.5 × 138.4 mm
RoboRIO interface v3
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
91 parts1