Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers24.8 × 13.8 mmQspimux, the printed circuit board in 3D

    Qspimux

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    16 parts57CC-BY-SA-4.0
  • 4 layers14 × 23.2 mmQspimux2, the printed circuit board in 3D

    Qspimux2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    13 parts57CC-BY-SA-4.0
  • 2 layers22.3 × 14 mmQspimux2-pinheader adapter, the printed circuit board in 3D

    Qspimux2-pinheader adapter

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    5 parts57CC-BY-SA-4.0
  • 2 layers26.7 × 50.8 mmAdapter, the printed circuit board in 3D

    Adapter

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    8 parts57CC-BY-4.0
  • 2 layers26.7 × 50.8 mmAdapter, the printed circuit board in 3D

    Adapter

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    3 parts57CC-BY-4.0
  • 2 layers68.6 × 53.3 mmRescueAVRAdapter, the printed circuit board in 3D

    RescueAVRAdapter

    felias-fogg/RescueAVR

    An Arduino sketch that is able to do high-voltage programming in order to resurrect bricked AVR MCUs (you need a bit of HW on a breadboard or some special Arduino shields as well)

    8 parts56
  • 2 layers18 × 16.8 mm24LCXXX, the printed circuit board in 3D

    24LCXXX

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    17 parts56Apache-2.0
  • 2 layers17.5 × 22.6 mmADS1X15, the printed circuit board in 3D

    ADS1X15

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    20 parts56Apache-2.0
  • 2 layers25.4 × 17.8 mmADS1X15, the printed circuit board in 3D

    ADS1X15

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    23 parts56Apache-2.0
  • 2 layers18 × 20.2 mmADXL32X, the printed circuit board in 3D

    ADXL32X

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    15 parts56Apache-2.0
  • 2 layers18 × 22.6 mmADXL345, the printed circuit board in 3D

    ADXL345

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    24 parts56Apache-2.0
  • 2 layers25.4 × 17.8 mmAPDS-9960, the printed circuit board in 3D

    APDS-9960

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    26 parts56Apache-2.0
  • 2 layers17.8 × 25.4 mmATTiny85, the printed circuit board in 3D

    ATTiny85

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    30 parts56Apache-2.0
  • 2 layers17.8 × 22.9 mmATTinyX12, the printed circuit board in 3D

    ATTinyX12

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    27 parts56Apache-2.0
  • 2 layers30.5 × 17.8 mmATTinyX14, the printed circuit board in 3D

    ATTinyX14

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    29 parts56Apache-2.0
  • 2 layers38.1 × 17.8 mmATTinyX16, the printed circuit board in 3D

    ATTinyX16

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    32 parts56Apache-2.0
  • 2 layers43.2 × 17.8 mmATTinyX17, the printed circuit board in 3D

    ATTinyX17

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    33 parts56Apache-2.0
  • 2 layers17.8 × 14.4 mmBME280, the printed circuit board in 3D

    BME280

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    21 parts56Apache-2.0
  • 2 layers25.4 × 17.8 mmBME280, the printed circuit board in 3D

    BME280

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    28 parts56Apache-2.0
  • 2 layers17.8 × 14.4 mmBME680, the printed circuit board in 3D

    BME680

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    21 parts56Apache-2.0
  • 2 layers17.8 × 14.4 mmBMP280, the printed circuit board in 3D

    BMP280

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    21 parts56Apache-2.0
  • 2 layers25.4 × 17.8 mmBMX055, the printed circuit board in 3D

    BMX055

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    30 parts56Apache-2.0
  • 2 layers25.4 × 17.8 mmBNO055, the printed circuit board in 3D

    BNO055

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    32 parts56Apache-2.0
  • 2 layers18 × 20.1 mmCCS811, the printed circuit board in 3D

    CCS811

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    28 parts56Apache-2.0