Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers39.1 × 44.3 mmXc9500xl 44 breakout, the printed circuit board in 3D

    Xc9500xl 44 breakout

    google/myelin-acorn-electron-hardware

    Phillip Pearson's retro hardware projects for the Acorn Electron

    32 parts59Apache-2.0
  • 4 layers38 × 25 mmPCBA DEBUG UART, the printed circuit board in 3D

    PCBA DEBUG UART

    intechstudio/grid-hardware

    28 parts59GPL-3.0
  • 2 layers86 × 13 mmPCBA INTERFACE, the printed circuit board in 3D

    PCBA INTERFACE

    intechstudio/grid-hardware

    50 parts59GPL-3.0
  • 2 layers70 × 50 mmXY ADAPTER FPC50, the printed circuit board in 3D

    XY ADAPTER FPC50

    intechstudio/grid-hardware

    6 parts59GPL-3.0
  • 2 layers98.6 × 98.6 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    46 parts59
  • 2 layers97.8 × 98 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers96.5 × 98 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    78 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    30 parts59
  • 2 layers57.1 × 53.3 mmAdapter shield, the printed circuit board in 3D

    Adapter shield

    astuder/epc901

    Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.

    19 parts58
  • 2 layers30 × 35 mmCAN Adapter Board - R1, the printed circuit board in 3D

    CAN Adapter Board - R1

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    8 parts58
  • 2 layers40 × 60 mmCFS Bus Adapter R1, the printed circuit board in 3D

    CFS Bus Adapter R1

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    46 parts58
  • 2 layers36.5 × 25.9 mmUart tt pc, the printed circuit board in 3D

    Uart tt pc

    ZhuYanzhen1/MM32_CLion

    本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.

    15 parts58AGPL-3.0
  • 2 layers13.4 × 20.1 mmPMW3610-breakout, the printed circuit board in 3D

    PMW3610-breakout

    cormoran/dya-dash-keyboard

    DYA Dash portable wireless split keyboard with 25mm trackball

    13 parts57CC-BY-4.0
  • 2 layers13.2 × 19.6 mmPMW3610-breakout, the printed circuit board in 3D

    PMW3610-breakout

    cormoran/dya-dash-keyboard

    DYA Dash portable wireless split keyboard with 25mm trackball

    11 parts57CC-BY-4.0
  • 2 layers14.8 × 11.3 mmBoard adapter DIP8, the printed circuit board in 3D

    Board adapter DIP8

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0
  • 2 layers10.2 × 10.7 mmBoard adapter DIP8-rev2, the printed circuit board in 3D

    Board adapter DIP8-rev2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    2 parts57CC-BY-SA-4.0
  • 2 layers8 × 6 mmBoard adapter SOIC8W, the printed circuit board in 3D

    Board adapter SOIC8W

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    9 parts57CC-BY-SA-4.0
  • 2 layers11.2 × 8.5 mmFlash adapter SOIC8W, the printed circuit board in 3D

    Flash adapter SOIC8W

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0
  • 2 layers11.2 × 11.6 mmFlash adapter SOIC16, the printed circuit board in 3D

    Flash adapter SOIC16

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0