
Interfaces and adapters
7,328 boards- 2 layers58 × 51 mm

- 2 layers31.3 × 30.2 mm

USB DB9 Adapter
hagbardZ/Martendo-USB-AMIGA-JoystickInterface_Kicad
Kicad Project for the USB-DB9 Amiga Interface
41 parts - 2 layers50.8 × 22.9 mm

Classic MIDI FeatherWing
hajdbo/Classic_MIDI_FeatherWing
A classic MIDI interface FeatherWing with provisions for DIN-5 and TRS TypeB connectors.
21 parts - 2 layers

- 2 layers55.2 × 52.5 mm

- 2 layers130 × 118.3 mm

- 2 layers20.3 × 30.3 mm

Slickbug
HalFrgrd/slickbug
A small SWD programmer using the Seeed Studio XIAO RP2040. I wanted a compact debugger with a tiny target footprint (roughly 4.8mm by 1.1mm).
10 partsMIT - 2 layers64 × 25 mm

AXI UART PCB
hananeaouragh-ops/axi-uart-fpga-usbc-board
AXI4-Lite UART peripheral in Verilog for Cyclone II (Quartus II, ModelSim) with a USB-C to UART breakout board designed in KiCad 10.
6 partsMIT - 2 layers18.5 × 10.5 mm

Lm3670-breakout
hannes-hochreiner/lm3670-breakout
Breakout board for the LM3670 DC-DC converter.
14 partsMIT - 2 layers12 × 14 mm

MMA8452Q breakout
hannes-hochreiner/MMA8452Q-breakout
A breakout board for the MMA8452Q 3-axis accelerometer
7 partsMIT - 2 layers29 × 25 mm

Rfm98-breakout
hannes-hochreiner/rfm98-breakout
Breakout board for the RFM98 LoRa transceiver module.
23 partsMIT - 2 layers17 × 26.9 mm

STM32L011F4P6-breakout
hannes-hochreiner/STM32L011F4P6-breakout
Simple breakout board for the STM32L011F4P6
13 partsMIT - 2 layers15.5 × 12 mm

Ts4231 breakout
hansihe/openwatchman
Made this because the ones triad makes are too expensive!
26 parts - 2 layers25 × 35 mm

- 4 layers22.3 × 52.2 mm

- 2 layers32 × 16 mm

Usb to uart bridge
Harshavar8jdm/cp2102-usb-to-uart-bridge
The design includes specific additions to address reliability issues common in similar modules, specifically the addition of TVS diodes for ESD protection and proper CC pin termination for USB-C standard compliance.
12 parts - 2 layers28 × 22 mm

Micro sd spi breakout module
Harshavar8jdm/micro-sd-spi-breakout-module
A compact, high-performance, 2-layer MicroSD Card Breakout Board designed in KiCad for embedded microcontrollers using the SPI (Serial Peripheral Interface) bus.
6 parts - 2 layers31.5 × 19.5 mm

USB to UART Converter
harshavardhana47/USB-to-UART-Converter
Designed a USB Type-C to UART interface using the CP2102 IC in KiCad for reliable serial communication between a computer and embedded systems.
19 parts - 4 layers90.8 × 58.8 mm

HALSER
hatlabs/HALSER-hardware
Hat Labs Serial Interface Device hardware design files
199 partsCC-BY-4.0 - 2 layers15.2 × 12.7 mm

- 2 layers50.8 × 22.9 mm

Swd featherwing
hearthsinger/swd-featherwing
Debugging featherwing for Adafruit feathers
15 partsGPL-3.0 - 2 layers60 × 76 mm

MMS2-Gameboy Cart Adapter
Heber-co-uk/MMS2-Gameboy-Cart-Adapter
Adapter PCB for the Gameboy cartridge add-on for Multisystem2
71 partsGPL-3.0 - 2 layers63.5 × 44.5 mm

RP2040 MPG
heli2src/GRBL_MPG_DRO_with_Teensy_and_mpgWheels
Control of the grpHall with a small touch display and mpg-wheels connected via RS485
19 partsGPL-2.0 - 2 layers49.5 × 37.5 mm
