6 layers90 × 94.5 mm
Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause
4 layers154.5 × 137 mm
Kup lulz
azonenberg/misc-devboards17Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
- Size
- 154.5 × 137 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 384
- Nets
- 654
- Pads
- 2,385
- Tracks, vias
- 6,518, 3,772
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Sep 2017
- Updated
- 29 Oct 2026
Overview
Kup lulz is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 154.5 × 137 mm with 384 parts on 654 nets, routed with 6,518 tracks and 3,772 vias.
It is built around the MYMGK00504ERSR, MYMGK1R812ERSR-H and MYMGK00506ERSR, with the MT25QU256ABA8E12-0AUT TR, 74LVC1T45W6 and SIT9121AI-2BF-XXS156.250000G among its other parts. Its parts include 162 capacitors, 99 resistors, 40 connectors, 16 ICs and 15 inductors. It belongs with the STM32 boards of this library.
Main components
12
MYMGK00504ERSR
SMD-23PSMD-23P DC-DC Power Modules ROHSMurataDC-DC Power ModulesMYMGK1R812ERSR-H
-1 12A 21.6W 700mV~1.8V 8V~15V 90.4% - Isolated Power Modules ROHSMurataIsolated Power Modules
MYMGK00506ERSR
SMD,9x7.5mm-40℃~+85℃ 1 24mA 3000uF 300kHz 5mm 6A 7.5mm 700mV~5V 8V~14V 95% 9mm Short Circuit Protection、Over-temperature protection、Over Current Protection、Overvoltage protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage Step-down type ±1% SMD,9x7.5mm DC-DC Power Modules ROHSMurataDC-DC Power Modules
MT25QU256ABA8E12-0AUT TR
TPBGA-24-40℃~+125℃ 1.7V~2V 1.8ms 100,000 cycles 166MHz 20 Years 256Mbit Hardware Write Protection、Software Write Protection、Write enable latch、Absolute Write Protection SPI TPBGA-24(6x8) NOR FLASH ROHSMicron TechNOR FLASH
74LVC1T45W6
SOT-26-40℃~+125℃ 1 1 1.65V~5.5V 1.65V~5.5V Bidirectional Power-Off Protection Tri-State SOT-26 Translators, Level Shifters ROHSDiodes IncorporatedTranslators, Level ShiftersSIT9121AI-2BF-XXS156.250000G
SMD3225-6P-40℃~+85℃ 156.25MHz 2.5V~3.3V 55mA LVDS ±10ppm SMD3225-6P Programmable Oscillators ROHSSiTimeProgrammable Oscillators
ADP1740ACPZ-1.8-R7
LFCSP-16(4x4)-40℃~+125℃@(Tj) 1 1.8V 160mV@(2A) 2A 3.6V 65dB@(1kHz) 90uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Reverse-polarity current protection、Adjustable soft-start Positive LFCSP-16(4x4) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AT24MAC402-XHM
TSSOP81.7V to 5.5V, I2C-Compatible (2-wire) 2-Kbit (256 x 8) Serial EEPROM with a EUI-48 AddressMicrochip TechnologyUncategorised
ECS-1612MV-250-CN-TR
SMD1612-4P-40℃~+85℃ 1.6V~3.63V 25MHz 5mA CMOS ±25ppm SMD1612-4P Crystal Oscillators ROHSECSCrystal Oscillators
MI0603J601R-10
06031 1A 200mΩ 600Ω@100MHz 0603 Ferrite Beads ROHSLairdFerrite Beads
25SVPF330M
SMD,D10xL12.6mm-55℃~+105℃ 10mm 12.6mm 25V 330uF 5000hrs@105℃ 5A@100kHz Polarized Polymer ±20% SMD,D10xL12.6mm Polymer Aluminum Capacitors ROHSPanasonicPolymer Aluminum Capacitors
SSM6N58NU,LF
UDFN-6(2x2)-50℃~+150℃ 1.8nC@4.5V 129pF 13pF 180mΩ@1.8V 1V 1W 2 N-Channel 30V 34pF 4A N-Channel ±12V UDFN-6(2x2) MOSFETs ROHSToshibaMOSFETs
Parts
384| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C112, C113, C116, C117, C137 +31 |
| 30 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C118, C119, C120, C121, C122, C123, C126, C130, C131, C132, C133, C134, C135, C136, C141, C145 +14 |
| 20 | 4.7K | azonenberg_pcb:EIA_0402_RES_NOSILK | R14, R40, R41, R42, R43, R55, R56, R57, R65, R66, R72, R73, R79, R80, R87, R88 +4 |
| 19 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R25, R27, R28, R30, R31, R32, R35, R39, R60, R61, R67, R68, R74, R75, R82, R83 +3 |
| 18 | SMPM | azonenberg_pcb:CONN_SMPM_AMPHENOL_C925-197J-51PT | J14, J17, J18, J19, J20, J21, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31 +2 |
| 17 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP26 +1 |
| 15 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C21, C28, C32, C40, C41, C59, C125, C127, C129, C157, C158, C159, C160, C161, C162 |
| 13 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R36, R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54, R92 |
| 12 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R4, R6, R12, R18, R22, R24, R33, R34, R37, R38, R58 |
| 10 | 10 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C36, C47, C48, C49, C50, C52, C58, C111, C154, C156 |
| 10 | 22 uF 25V | azonenberg_pcb:EIA_1812_CAP_NOSILK | C1, C2, C3, C4, C12, C13, C15, C16, C17, C19 |
| 10 | 220 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C6, C7, C8, C9, C10, C11, C27, C29, C31, C33 |
| 9 | 100 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C26, C30, C34, C38, C51, C53, C54, C55, C56 |
| 9 | 22 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C63, C64, C69, C70, C75, C76, C114, C115, C144 |
| 8 | 0.5 | azonenberg_pcb:EIA_0402_RES_NOSILK | R63, R64, R70, R71, R77, R78, R85, R86 |
| 8 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C79, C80, C83, C84, C85, C86, C87, C88 |
| 8 | 4.7 uH | azonenberg_pcb:EIA_0805_INDUCTOR_NOSILK | L1, L2, L3, L4, L5, L6, L13, L14 |
| 6 | 1 uH | azonenberg_pcb:EIA_0805_INDUCTOR_NOSILK | L7, L8, L9, L10, L11, L12 |
| 6 | 33K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R13, R59, R93, R98, R99 |
| 5 | 47 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C43, C44, C45, C46, C57 |
| 5 | GREEN | azonenberg_pcb:EIA_0402_LED | D1, D5, D6, D7, D8 |
| 5 | TESTPOINT | azonenberg_pcb:TESTPOINT_SMT_0.5MM | TP1, TP2, TP3, TP4, TP6 |
| 4 | 0.1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R62, R69, R76, R84 |
| 4 | CONN_SFP_HOST | azonenberg_pcb:CONN_SFP+_AMPHENOL_UE76_A10_2000T | J7, J9, J11, J33 |
| 4 | SCREWHOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_4_40 | M2, M3, M4, M5 |
| 4 | SFP_CAGE | azonenberg_pcb:CONN_SFP_CAGE_TE_2007194-1 | J8, J10, J12, J34 |
| 3 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R10, R11, R23 |
| 3 | 74LVC1T45 | azonenberg_pcb:DFN_6_0.5MM_1.6x1.6MM_TI_DPK | U11, U12, U13 |
| 3 | CONN_01X03 | azonenberg_pcb:CONN_HEADER_2.54MM_1x3_REFLOW | J3, J39, TP7 |
| 3 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R15, R26, R29 |
| 3 | SIT9121AI-2BF-XXS156.250000G | azonenberg_pcb:OSCILLATOR_LVDS_3.2x2.5 | U16, U17, U18 |
| 2 | 2.2 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C124, C128 |
| 2 | CONN_QSFP_HOST | azonenberg_pcb:CONN_ZQSFP+_TE_1551920-2 | J15, J16 |
| 2 | CORTEX_DEBUG_ETM | azonenberg_pcb:CONN_HEADER_1.27MM_2x10_SMT_SAMTEC_FTSH-110-01-L-DV-K | J4, J41 |
| 2 | DNP | azonenberg_pcb:EIA_1210_CAP_NOSILK | C35, C37 |
| 2 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB2, FB3 |
| 2 | MYMGK00504ERSR | azonenberg_pcb:MODULE_MURATA_MYMGK00504ERSR | U5, U7 |
| 2 | MYMGK1R812ERSR | azonenberg_pcb:MODULE_MURATA_MYMGK1R812 | U2, U3 |
| 2 | QSFP_CAGE | azonenberg_pcb:CONN_ZQSFP+_CAGE_TE_4-2170705-5 | J35, J36 |
| 2 | SWITCH | azonenberg_pcb:SWITCH_RAFI_MICON_5 | SW1, SW2 |
| 2 | SZESD7471N2T5G | azonenberg_pcb:SOD882 | D3, D4 |
| 2 | TESTCLIP | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP24, TP25 |
| 1 | 1.2k | azonenberg_pcb:EIA_0402_RES_NOSILK | R7 |
| 1 | 10 uF 25V | azonenberg_pcb:EIA_1210_CAP_NOSILK | C14 |
| 1 | 100 | azonenberg_pcb:EIA_0402_RES_NOSILK | R81 |
| 1 | 100K | azonenberg_pcb:EIA_0402_RES_NOSILK | R9 |
| 1 | 2.2 uH | azonenberg_pcb:EIA_1210_CAP_NOSILK | L15 |
| 1 | 2.2k | azonenberg_pcb:EIA_0402_RES_NOSILK | R16 |
| 1 | 20k | azonenberg_pcb:EIA_0402_RES_NOSILK | R19 |
| 1 | 22 | azonenberg_pcb:EIA_0402_RES_NOSILK | R20 |
| 1 | 220 pF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C155 |
| 1 | 24.9k | azonenberg_pcb:EIA_0402_RES_NOSILK | R5 |
| 1 | 25SVPF330M | azonenberg_pcb:CAP_AL_10MM_SMT | C5 |
| 1 | 2A | azonenberg_pcb:EIA_0603_CAP_NOSILK | F1 |
| 1 | 300 | azonenberg_pcb:EIA_0402_RES_NOSILK | R21 |
| 1 | 330 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C42 |
| 1 | 4.7k | azonenberg_pcb:EIA_0402_RES_NOSILK | R17 |
| 1 | 620 | azonenberg_pcb:EIA_0402_RES_NOSILK | R8 |
| 1 | 8.06K | azonenberg_pcb:EIA_0402_RES_NOSILK | R2 |
| 1 | ADP1740ACPZ-1.8-R7 | azonenberg_pcb:QFN_16_0.65MM_4x4MM | U8 |
| 1 | AT24MAC402 | azonenberg_pcb:DFN_8_0.5MM_2x3MM_TALL | U15 |
| 1 | BLM31KN271SH1L | azonenberg_pcb:EIA_1206_CAP_NOSILK | FB1 |
| 1 | CONN_01X05 | azonenberg_pcb:CONN_HEADER_2.54MM_1x5_REFLOW | TP8 |
| 1 | CONN_IBC_MGMT | azonenberg_pcb:CONN_MOLEX_PICOBLADE_5POS_0532610571 | J2 |
| 1 | CONN_PCIE_PWR_8PIN | azonenberg_pcb:CONN_MOLEX_MINIFITJR_8POS_0039291087 | J1 |
| 1 | DNP | azonenberg_pcb:EIA_0402_CAP_NOSILK | C39 |
| 1 | ECS-1612MV-250-CN | azonenberg_pcb:OSCILLATOR_1.6x1.2 | U6 |
| 1 | FAN_01 | azonenberg_pcb:CONN_MOLEX_KK_0470531000 | J13 |
| 1 | HEATSINK | azonenberg_pcb:HEATSINK_WAKEFIELDVETTE_960-27-12-D-AB-0 | M1 |
| 1 | JUMPER_0402 | azonenberg_pcb:EIA_0402_JUMPER | J5 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | M6 |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | M7 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | M9 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | M8 |
| 1 | MT25QU256ABA8E12-0AUT | azonenberg_pcb:BGA_24_6x8_DEPOP1_1MM | U10 |
| 1 | MYMGK00506ERSR | azonenberg_pcb:MODULE_MURATA_MYMGK00504ERSR | U4 |
| 1 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J38 |
| 1 | RED | azonenberg_pcb:EIA_0402_LED | D2 |
| 1 | SSM6N58NU | azonenberg_pcb:DFN_6_0.65MM_2x2MM_GDS | Q1 |
| 1 | STM32H735-UFBGA176-25 | azonenberg_pcb:BGA_201_10x10_DEPOP_0.65MM_OSHPARK | U14 |
The 381 most common of 384 parts.
Questions
How big is the Kup lulz PCB?
It measures 154.5 × 137 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Kup lulz use?
384 parts, built around the MYMGK00504ERSR, MYMGK1R812ERSR-H, MYMGK00506ERSR and MT25QU256ABA8E12-0AUT TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kup lulz KiCad files?
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is kup-lulz/kup-lulz.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kup lulz design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from azonenberg/misc-devboards
12- 4 layers108 × 115.5 mm
Process test-0402-reduction
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
206 parts17BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers77 × 71.5 mm
Ksz9031-eval
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
173 parts17BSD-3-Clause - 4 layers73 × 88 mm
Fpga test kintex676-artix484
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
161 parts17BSD-3-Clause - 4 layers42 × 157.5 mm
Quad relay mux
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
102 parts17BSD-3-Clause - 4 layers35 × 73.5 mm
Lpr rgmii phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
86 parts17BSD-3-Clause - 4 layers105 × 28.5 mm
Tragiclaser phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
83 parts17BSD-3-Clause - 4 layers74 × 58 mm
Ltc3374-test
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
77 parts17BSD-3-Clause - 2 layers66 × 93.5 mm
Christmas tree
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
65 parts17BSD-3-Clause - 4 layers57 × 60 mm
T20-l431-carrier
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
60 parts17BSD-3-Clause - 4 layers10.1 × 12.2 mm
T20-l431-som
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
54 parts17BSD-3-Clause
Similar boards
- 10 layers151 × 111 mm
Switch engine
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
369 parts36BSD-3-Clause - 10 layers165 × 121 mm
Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause - 8 layers145 × 139 mm
Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause - 4 layers100 × 70 mm
Mp2-xc7k test
azonenberg/stm32mp2-baremetal-tests
Experimenting with bare metal STM32MP2 development
351 parts4BSD-3-Clause - 8 layers126 × 117 mm
- 10 layers130 × 90 mm
- 4 layers48 × 45.5 mm
Stm32h750-expansion
azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs
73 parts1BSD-3-Clause - 4 layers67 × 65 mm
Common ibc
azonenberg/common-ibc
48-12V 72W intermediate bus converter common to all of my larger FPGA projects
112 parts6BSD-3-Clause