
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Baset1-media converter is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 100.5 × 62.5 mm with 180 parts on 131 nets, routed with 1,575 tracks and 582 vias.
It is built around the KSZ9031RNXCA, FT234XD-R and ECS-1612MV-250-CN-TR, with the RCLAMP0514M, MI0603J601R-10 and 0826-1G1T-23-F among its other parts. Its parts include 65 capacitors, 53 resistors, 11 diodes, 10 ICs and 5 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C3, C11, C12, C18, C19, C24, C25, C30, C31, C32, C33, C34, C35, C36, C37, C38 +12 |
| 12 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R8, R21, R23, R24, R25, R26, R27, R28, R45, R52, R53 |
| 11 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C2, C7, C13, C14, C15, C16, C17, C20, C21, C22, C23 |
| 11 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 9 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R2, R3, R4, R5, R9, R10, R11, R43, R44 |
| 8 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R13, R14, R15, R16, R17, R18, R22, R32 |
| 8 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 |
| 7 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C1, C26, C27, C28, C29, C55, C56 |
| 7 | GREEN | azonenberg_pcb:EIA_0603_LED | D1, D2, D3, D4, D5, D6, D9 |
| 6 | 4.7uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C43, C44, C45, C46, C47, C48 |
| 5 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R12, R20, R29, R33, R34 |
| 4 | 10 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C62, C63, C64, C65 |
| 4 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R36, R39, R40, R41 |
| 4 | SCREWHOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_4_40 | MH1, MH2, MH3, MH4 |
| 4 | SZESD7471N2T5G | azonenberg_pcb:SOD882 | D7, D8, D10, D11 |
| 3 | 2.2 uH | azonenberg_pcb:INDUCTOR_YUDEN_NRS5030 | L1, L2, L3 |
| 3 | 2.49K | azonenberg_pcb:EIA_0402_RES_NOSILK | R37, R38, R42 |
| 3 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C59, C60, C61 |
| 2 | 10 nF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C5, C10 |
| 2 | 27 | azonenberg_pcb:EIA_0402_RES_NOSILK | R6, R7 |
| 2 | 47 pF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C6, C8 |
| 2 | CONN_01X02 | azonenberg_pcb:CONN_HEADER_2.54MM_1x2 | J4, JP1 |
| 2 | CONN_01x3 | azonenberg_pcb:CONN_HEADER_2.54MM_1x3 | TP1, TP2 |
| 2 | ECS-1612MV-250-CN | azonenberg_pcb:OSCILLATOR_1.6x1.2 | U5, U9 |
| 2 | RCLAMP0514M | azonenberg_pcb:SOP_10_0.5MM_3MM | U6, U7 |
| 2 | TESTCLIP | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP14, TP15 |
| 1 | 0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J3 |
| 1 | 1.02M | azonenberg_pcb:EIA_0402_RES_NOSILK | R51 |
| 1 | 100K | azonenberg_pcb:EIA_0402_RES_NOSILK | R35 |
| 1 | 12.1K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R19 |
| 1 | 162K | azonenberg_pcb:EIA_0402_RES_NOSILK | R47 |
| 1 | 1A | azonenberg_pcb:EIA_0402_RES_NOSILK | F1 |
| 1 | 1K/DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R30 |
| 1 | 2.2K | azonenberg_pcb:EIA_0402_RES_NOSILK | R31 |
| 1 | 232K | azonenberg_pcb:EIA_0402_RES_NOSILK | R48 |
| 1 | 255K | azonenberg_pcb:EIA_0402_RES_NOSILK | R50 |
| 1 | 33 nF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C58 |
| 1 | 4.7 nF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C57 |
| 1 | 464K | azonenberg_pcb:EIA_0402_RES_NOSILK | R49 |
| 1 | 511K | azonenberg_pcb:EIA_0402_RES_NOSILK | R46 |
| 1 | CONN_01X05 | azonenberg_pcb:CONN_HEADER_2.54MM_1x5 | J1 |
| 1 | DLW32MH101XT2L | azonenberg_pcb:CMC_1210 | FL1 |
| 1 | DP83TG720S-Q1 | azonenberg_pcb:QFN_36_0.5MM_6x6MM | U8 |
| 1 | FT234XD | azonenberg_pcb:DFN_12_0.5MM_3x3MM | U2 |
| 1 | KSZ9031RN | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U4 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | M1 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | M2 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | M3 |
| 1 | LTC3374-QFN | azonenberg_pcb:QFN_38_0.5MM_5x7MM | U3 |
| 1 | NCP45521-H | azonenberg_pcb:DFN_8_0.5MM_2x2MM | U10 |
| 1 | SSM6N58NU | azonenberg_pcb:DFN_6_0.65MM_2x2MM_GDS | Q1 |
| 1 | STM32F031-QFN28 | azonenberg_pcb:QFN_28_0.5MM_4x4MM_NOPAD | U1 |
| 1 | UX60SX-MB-5ST | azonenberg_pcb:CONN_HIROSE_UX60S-MB-5ST_MINI_USB | J2 |

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo


azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs

azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch

azonenberg/latentpacket
The LATENTPACKET network infrastructure platform

azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling



It measures 100.5 × 62.5 mm and has 4 copper layers, 4.69 mm thick.
180 parts, built around the KSZ9031RNXCA, FT234XD-R, ECS-1612MV-250-CN-TR and RCLAMP0514M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is baset1-media-converter/baset1-media-converter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).