Skip to the content
12

25SVPF330M

PanasonicExtended

-55℃~+105℃ 10mm 12.6mm 25V 330uF 5000hrs@105℃ 5A@100kHz Polarized Polymer ±20% SMD,D10xL12.6mm Polymer Aluminum Capacitors ROHS

Part id
panasonic/25SVPF330M
Category
Polymer Aluminum Capacitors
Package
SMD,D10xL12.6mm
Pins
2
In stock
170 at JLCPCB (C178367)
Used on
6 open-source boards

Overview

The 25SVPF330M is a polymer Aluminum Capacitor made by Panasonic in a SMD,D10xL12.6mm package with 2 pins. -55℃~+105℃ 10mm 12.6mm 25V 330uF 5000hrs@105℃ 5A@100kHz Polarized Polymer ±20% SMD,D10xL12.6mm Polymer Aluminum Capacitors ROHS.

PCBKit's library has its KiCad symbol (Device:C_Polarized, from KiCad's library) and its footprint (Capacitor_SMD:CP_Elec_10x12.6, from KiCad's library), ready for a KiCad board. 170 are in stock at JLCPCB (part C178367). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:C_PolarizedFrom KiCad's library

Footprint

12
Capacitor_SMD:CP_Elec_10x12.6From KiCad's library

Pinout

2
The pins of the 25SVPF330M
PinNameType
1—Passive
2—Passive

Open-source boards using it

6
  • 4 layers154.5 × 137 mmKup lulz, the printed circuit board in 3D

    Kup lulz

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    384 parts17BSD-3-Clause
  • 10 layers165 × 121 mmTriggercrossbar, the printed circuit board in 3D

    Triggercrossbar

    azonenberg/triggercrossbar

    Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling

    633 parts8BSD-3-Clause
  • 4 layers67 × 65 mmCommon ibc, the printed circuit board in 3D

    Common ibc

    azonenberg/common-ibc

    48-12V 72W intermediate bus converter common to all of my larger FPGA projects

    112 parts6BSD-3-Clause
  • 10 layers151 × 111 mmSwitch engine, the printed circuit board in 3D

    Switch engine

    azonenberg/latentred

    Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch

    369 parts36BSD-3-Clause
  • 6 layers90 × 94.5 mmFpga stm32-ifaces, the printed circuit board in 3D

    Fpga stm32-ifaces

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    274 parts17BSD-3-Clause
  • 4 layers45.6 × 131 mmPd booster-16amps, the printed circuit board in 3D

    Pd booster-16amps

    mikegoelzer/Homebrew-ECP5-SBC

    Kicad files for homebrew hobbyist computer with custom RISC-V CPU

    82 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 25SVPF330M?

Yes. The symbol is Device:C_Polarized and the footprint Capacitor_SMD:CP_Elec_10x12.6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 25SVPF330M?

SMD,D10xL12.6mm, with 2 pins. Its footprint is drawn on this page.

Where is the 25SVPF330M datasheet?

Panasonic publishes it: the Datasheet link on this page opens it.

Where can I order the 25SVPF330M?

JLCPCB lists it as part C178367, with 170 in stock; the sellers' links on this page open their listings.

What can replace the 25SVPF330M?

Parts like it in the library: the 35SVPK330M by Panasonic, the PA25V330M6X9 by jieerrui, the PA25V330M5X11 by jieerrui and the PA25V330M6X12 by jieerrui. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 25SVPF330M?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.