4 layers154.5 × 137 mm
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
384 parts17BSD-3-Clause
4 layers105 × 28.5 mm
Tragiclaser phy
azonenberg/misc-devboards17Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
- Size
- 105 × 28.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 173
- Pads
- 479
- Tracks, vias
- 1,140, 181
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 26 Sep 2017
- Updated
- 29 Oct 2026
Overview
Tragiclaser phy is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 105 × 28.5 mm with 83 parts on 173 nets, routed with 1,140 tracks and 181 vias.
It is built around the XC6SLX25-2FTG256C and ADP322ACPZ-145-R7. Its parts include 32 resistors, 28 capacitors, 4 ICs, 3 connectors and 1 diode. It belongs with the FPGA and CPLD boards of this library.
Main components
2Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C1, C15, C16, C18, C20, C21, C22, C23, C24, C25, C26, C27, C28 |
| 11 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C3, C4, C5, C6, C7, C11, C12, C13, C14, C17, C19 |
| 6 | 1k | azonenberg_pcb:EIA_0402_RES_NOSILK | R2, R3, R15, R16, R17, R18 |
| 6 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R19, R23, R24, R25, R26, R27 |
| 5 | CONN_01X01 | azonenberg_pcb:TESTPOINT_SMT_0.5MM | TP7, TP8, TP10, TP11, TP12 |
| 4 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R10, R12, R13 |
| 4 | 953 | azonenberg_pcb:EIA_0402_RES_NOSILK | R33, R34, R37, R38 |
| 4 | SMA | azonenberg_pcb:CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | TP1, TP4, TP5, TP6 |
| 3 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R14, R20, R21 |
| 3 | 100 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C8, C9, C10 |
| 2 | 115 | azonenberg_pcb:EIA_0402_RES_NOSILK | R7, R8 |
| 2 | 16 | azonenberg_pcb:EIA_0402_RES_NOSILK | R5, R6 |
| 2 | 2.26k | azonenberg_pcb:EIA_0402_RES_NOSILK | R9, R11 |
| 1 | 100 | azonenberg_pcb:EIA_0402_RES_NOSILK | R4 |
| 1 | 100 MHz | azonenberg_pcb:OSCILLATOR_3.2x2.5 | U4 |
| 1 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R28 |
| 1 | 4.7k | azonenberg_pcb:EIA_0402_RES_NOSILK | R22 |
| 1 | ADP322ACPZ-145-R7 | azonenberg_pcb:QFN_16_0.5MM_3x3MM | U2 |
| 1 | BEL_FUSE_0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J2 |
| 1 | CONN_01X01 | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP9 |
| 1 | CONN_01X12 | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA | P1 |
| 1 | CONN_3_PWROUT | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1 |
| 1 | DNP | azonenberg_pcb:SOIC_8_3.9MM | U3 |
| 1 | DNP | azonenberg_pcb:EIA_0402_CAP_NOSILK | C2 |
| 1 | GREEN | azonenberg_pcb:EIA_0603_LED | D1 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_polarity_center_5x1.4mm | G*** |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | G*** |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | G*** |
| 1 | XC6SLX25-2FTG256C | azonenberg_pcb:BGA_256_17x17_FULLARRAY_1MM | U1 |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J1 |
Questions
How big is the Tragiclaser phy PCB?
It measures 105 × 28.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tragiclaser phy use?
83 parts, built around the XC6SLX25-2FTG256C and ADP322ACPZ-145-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tragiclaser phy KiCad files?
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is tragiclaser-phy/tragiclaser-phy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tragiclaser phy design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from azonenberg/misc-devboards
12- 6 layers90 × 94.5 mm
Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause - 4 layers108 × 115.5 mm
Process test-0402-reduction
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
206 parts17BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers77 × 71.5 mm
Ksz9031-eval
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
173 parts17BSD-3-Clause - 4 layers73 × 88 mm
Fpga test kintex676-artix484
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
161 parts17BSD-3-Clause - 4 layers42 × 157.5 mm
Quad relay mux
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
102 parts17BSD-3-Clause - 4 layers35 × 73.5 mm
Lpr rgmii phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
86 parts17BSD-3-Clause - 4 layers74 × 58 mm
Ltc3374-test
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
77 parts17BSD-3-Clause - 2 layers66 × 93.5 mm
Christmas tree
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
65 parts17BSD-3-Clause - 4 layers57 × 60 mm
T20-l431-carrier
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
60 parts17BSD-3-Clause - 4 layers10.1 × 12.2 mm
T20-l431-som
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
54 parts17BSD-3-Clause
Similar boards
- 4 layers65 × 60 mm
Reworkctf reworkctf
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
143 parts21MIT - 4 layers36 × 50.2 mm
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0 - 4 layers30 × 30 mm
ReCamera 2002 S4 GC2053 Sensor Board V1.0 SCH&PCB 250905
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
83 parts495Apache-2.0 - 4 layers95 × 56 mm
- 4 layers32 × 30 mm
- 4 layers44 × 39 mm
Ad9864 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
83 parts205 - 4 layers60 × 28 mm
- 4 layers43.4 × 25.4 mm
R820t2 breakout
emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
83 parts85