Skip to the content
4 layers10.1 × 12.2 mmT20-l431-som, the printed circuit board in 3D

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Size
10.1 × 12.2 mm
Copper layers
4
Thickness
0.8 mm
Parts
54
Nets
123
Pads
439
Tracks, vias
1,072, 297
Pours
7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Sep 2017
Updated
29 Oct 2026

Overview

T20-l431-som is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 10.1 × 12.2 mm with 54 parts on 123 nets, routed with 1,072 tracks and 297 vias.

It is built around the T20W80I4, MX25U3232FBHI02 and SIT8021AI-J4-XXS-16.000000, with the TPS22916BYFPR and MPZ0603S470CT000 among its other parts. Its parts include 34 capacitors, 9 resistors, 9 ICs and 2 inductors. It belongs with the computers and single-board computers boards and the STM32 boards of this library.

Main components

5

Parts

54
QtyValueFootprintReferences
301 uFazonenberg_pcb:EIA_0201_CAP_NOSILKC1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C22, C23, C24 +14
910Kazonenberg_pcb:EIA_0201_RES_NOSILKR1, R2, R3, R4, R5, R6, R7, R8, R9
34.7 uF 2.5Vazonenberg_pcb:EIA_0201_CAP_NOSILKC29, C30, C31
2MPZ0603S470CT000azonenberg_pcb:EIA_0201_CAP_NOSILKL1, L2
10.01 uFazonenberg_pcb:EIA_0201_CAP_NOSILKC20
174LVC1T45_DSBGA_YZPazonenberg_pcb:BGA_6_1.5x0.9_0.5MM_TI_YZPU6
1LP3986TL-2518/NOPBazonenberg_pcb:BGA_8_0.5MM_1.6MM_TI_YZR0008U5
1MODULE_INTERNAL_T20_L431_HOSTazonenberg_pcb:MODULE_INTERNAL_T20_L431_HOSTU4
1MX25U3232Fazonenberg_pcb:BGA_12_0.5MM_2x2MM_MX25U3232F_WLCSPU3
1NCP139AFCT120T2Gazonenberg_pcb:BGA_6_1.3x1.0_0.4MMU9
1SIT8021AI-J4-XXS-16.000000azonenberg_pcb:OSCILLATOR_SIT8021_WLCSPU8
1STM32L431-WLCSP64azonenberg_pcb:BGA_64_0.35MM_3p1MM_STM32L431U1
1T20W80azonenberg_pcb:BGA_80_0.4MM_4p4x3p5_T20W80U2
1TPS22916BYFPRazonenberg_pcb:BGA_4_0.4MM_0.8x0.8_TI_YFP0004U7

More from azonenberg/misc-devboards

12
  • 4 layers154.5 × 137 mmKup lulz, the printed circuit board in 3D

    Kup lulz

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    384 parts17BSD-3-Clause
  • 6 layers90 × 94.5 mmFpga stm32-ifaces, the printed circuit board in 3D

    Fpga stm32-ifaces

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    274 parts17BSD-3-Clause
  • 4 layers108 × 115.5 mmProcess test-0402-reduction, the printed circuit board in 3D

    Process test-0402-reduction

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    206 parts17BSD-3-Clause
  • 4 layers100.5 × 62.5 mmBaset1-media converter, the printed circuit board in 3D

    Baset1-media converter

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    180 parts17BSD-3-Clause
  • 4 layers77 × 71.5 mmKsz9031-eval, the printed circuit board in 3D

    Ksz9031-eval

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    173 parts17BSD-3-Clause
  • 4 layers73 × 88 mmFpga test kintex676-artix484, the printed circuit board in 3D

    Fpga test kintex676-artix484

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    161 parts17BSD-3-Clause
  • 4 layers42 × 157.5 mmQuad relay mux, the printed circuit board in 3D

    Quad relay mux

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    102 parts17BSD-3-Clause
  • 4 layers35 × 73.5 mmLpr rgmii phy, the printed circuit board in 3D

    Lpr rgmii phy

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    86 parts17BSD-3-Clause
  • 4 layers105 × 28.5 mmTragiclaser phy, the printed circuit board in 3D

    Tragiclaser phy

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    83 parts17BSD-3-Clause
  • 4 layers74 × 58 mmLtc3374-test, the printed circuit board in 3D

    Ltc3374-test

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    77 parts17BSD-3-Clause
  • 2 layers66 × 93.5 mmChristmas tree, the printed circuit board in 3D

    Christmas tree

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    65 parts17BSD-3-Clause
  • 4 layers57 × 60 mmT20-l431-carrier, the printed circuit board in 3D

    T20-l431-carrier

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    60 parts17BSD-3-Clause

Similar boards

  • 4 layers81 × 37 mmMaidenhead pocket locator, the printed circuit board in 3D

    Maidenhead pocket locator

    EdmundLimBoEn/gps-maidenhead-device

    Open-source portable GNSS Maidenhead grid locator with a 16x2 LCD

    117 parts
  • 4 layers50 × 16 mmPmeter, the printed circuit board in 3D

    Pmeter

    Guiimartinho/bike-powermeter

    Medidor de potência para bicicleta, aberto do extensômetro ao pod: torque por ponte de classe transdutor no braço do pedivela, BLE Cycling Power e ANT+ Bicycle Power. Firmware Zephyr, placa e case gerados por programa.

    59 parts
  • 4 layers21.5 × 11.5 mmImutag nand, the printed circuit board in 3D

    Imutag nand

    tag-designs/hardware

    Hardware designs for tags and bases

    37 parts2CERN-OHL-P-2.0
  • 4 layers52.7 × 47.9 mmAnalyzerBoxPCB fork, the printed circuit board in 3D

    AnalyzerBoxPCB fork

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    54 parts5.1kGPL-3.0
  • 4 layers29.2 × 75.2 mmPicoGUS Hand386, the printed circuit board in 3D

    PicoGUS Hand386

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    54 parts805
  • 4 layers48 × 80 mmBoard latest, the printed circuit board in 3D

    Board latest

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    54 parts397Apache-2.0
  • 4 layers27.3 × 32.3 mmMixer breakout, the printed circuit board in 3D

    Mixer breakout

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    54 parts205
  • 4 layers101 × 97 mmKeybase, the printed circuit board in 3D

    Keybase

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    54 parts114

Questions

How big is the T20-l431-som PCB?

It measures 10.1 × 12.2 mm and has 4 copper layers, 0.8 mm thick.

What parts does the T20-l431-som use?

54 parts, built around the T20W80I4, MX25U3232FBHI02, SIT8021AI-J4-XXS-16.000000 and TPS22916BYFPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the T20-l431-som KiCad files?

From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is t20-l431-som/t20-l431-som.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the T20-l431-som design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).