Skip to the content
2 layers45.5 × 35 mmTraffic light controller, the printed circuit board in 3D

Traffic light controller

Yuvaraaj-007/KiCad-Learning

This repository contains my PCB design practice projects created while learning KiCad.

Size
45.5 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
21
Pads
42
Tracks, vias
158, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Jun 2026
Updated
4 Jul 2026

Overview

Traffic light controller is an open-source printed circuit board by Yuvaraaj-007, from the Yuvaraaj-007/KiCad-Learning repository on GitHub. It is a 2-layer board of 45.5 × 35 mm with 11 parts on 21 nets, routed with 158 tracks and 0 vias.

It is built around the NE555D. Its parts include 5 resistors, 3 diodes, 2 ICs and 1 capacitor.

Main components

1

README

README.md

KiCad Learning Projects

This repository contains my PCB design practice projects created while learning KiCad.

Projects

1. LED PCB Design

  • My first PCB design project
  • Designed a simple LED circuit with a current-limiting resistor
  • Learned schematic creation, PCB routing, and DRC verification

2. 555 Timer LED Blinking Circuit

  • Designed an astable multivibrator using the 555 Timer IC
  • Created an LED blinking circuit using resistor-capacitor timing components
  • Learned the working of the 555 Timer in astable mode
  • Improved PCB layout and routing skills

3. Push Button LED Circuit

  • Designed a circuit to control an LED using a push button switch
  • Learned switch connections and basic input-output circuits
  • Practiced schematic design and PCB layout creation

4. Transistor LED Circuit

  • Designed an LED switching circuit using a transistor
  • Learned the basics of transistor operation and switching applications
  • Improved understanding of electronic components and PCB design workflow

5. Traffic light controller

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Traffic light controller design
  • Complex PCB routing and component placement

6. Temperature control

  • Working of DHT11 sensor
  • I2C principle of nano
  • Implementing displays in PCB
  • PCB schematic and footprints

7. Door lock system using RFID

  • Working of RC522 module
  • SPI principle
  • Using servo motor in PCB design
  • Working with connectors
  • PCB routing (B-Cu)
  • Buzzer implementation

Skills I Am Learning

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Microcontrollers
  • SPI and I2C principles

Goal

To improve my PCB design skills, strengthen my electronics knowledge, and build real-world embedded and PCB projects step by step.

Parts

11
QtyValueFootprintReferences
3330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R5
1100KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
110uFCapacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mmC1
14017Package_DIP:DIP-16_W7.62mmU2
1GreenLED_THT:LED_D5.0mmD3
1NE555DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1RedLED_THT:LED_D5.0mmD1
1YellowLED_THT:LED_D5.0mmD2

More from Yuvaraaj-007/KiCad-Learning

7
  • 2 layers40.5 × 50 mmArduino Nano Development Board, the printed circuit board in 3D

    Arduino Nano Development Board

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers49.5 × 52 mmRFID door lock, the printed circuit board in 3D

    RFID door lock

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers50 × 31.5 mmLED 555timer, the printed circuit board in 3D

    LED 555timer

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    6 parts
  • 2 layers20 × 23 mmAutomatic Night lamp, the printed circuit board in 3D

    Automatic Night lamp

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    5 parts
  • 2 layers22.5 × 24 mmLED Push Button, the printed circuit board in 3D

    LED Push Button

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts
  • 2 layers14.5 × 20 mmLED Transistor, the printed circuit board in 3D

    LED Transistor

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts
  • 2 layers45.5 × 50.5 mmTemperature monitor, the printed circuit board in 3D

    Temperature monitor

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts

Similar boards

  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 2 layers140.7 × 47.4 mmEG8010 A1, the printed circuit board in 3D

    EG8010 A1

    Millisman/EG8010

    Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

    201 parts17MIT
  • 2 layers175 × 115 mmLaser Controllerv2 only for pcb test, the printed circuit board in 3D

    Laser Controllerv2 only for pcb test

    Andre1Becker/GalvOS

    Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

    122 parts11GPL-3.0
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 2 layers95 × 60 mmOpenCatFlap, the printed circuit board in 3D

    OpenCatFlap

    Alex-ala/OpenCatFlap

    Smart cat flap using Wifi+HTTP to work without a cloud.

    104 parts8
  • 2 layers39 × 66.5 mmBC250-Power, the printed circuit board in 3D

    BC250-Power

    Needleroozer/bc250-power-board

    Power Distribution PCBs for the BC-250 cards

    39 parts5
  • 6 layers210 × 119 mmClaculator Keypad, the printed circuit board in 3D

    Claculator Keypad

    Robert-Mones/Claculator

    A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.

    202 parts5
  • 2 layers155 × 30 mmRuler V2 KiCad, the printed circuit board in 3D

    Ruler V2 KiCad

    ben5049/ICRS-PCB-Ruler

    ICRS PCB ruler

    38 parts3Apache-2.0

Questions

How big is the Traffic light controller PCB?

It measures 45.5 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Traffic light controller use?

11 parts, built around the NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Traffic light controller KiCad files?

From the Yuvaraaj-007/KiCad-Learning repository on GitHub, at the commit this page was made from: the board is Traffic light controller/Traffic light controller.kicad_pcb and its schematic Arduino Nano Development Board/Arduino Nano Development Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Traffic light controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Yuvaraaj-007 before reusing the design.