Skip to the content
2 layers14.5 × 20 mmLED Transistor, the printed circuit board in 3D

This repository contains my PCB design practice projects created while learning KiCad.

Size
14.5 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
5
Pads
9
Tracks, vias
12, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Jun 2026
Updated
4 Jul 2026

Overview

LED Transistor is an open-source printed circuit board by Yuvaraaj-007, from the Yuvaraaj-007/KiCad-Learning repository on GitHub. It is a 2-layer board of 14.5 × 20 mm with 4 parts on 5 nets, routed with 12 tracks and 0 vias.

It is built around the BC547. Its parts include 2 resistors, 1 diode and 1 transistor.

Main components

1

README

README.md

KiCad Learning Projects

This repository contains my PCB design practice projects created while learning KiCad.

Projects

1. LED PCB Design

  • My first PCB design project
  • Designed a simple LED circuit with a current-limiting resistor
  • Learned schematic creation, PCB routing, and DRC verification

2. 555 Timer LED Blinking Circuit

  • Designed an astable multivibrator using the 555 Timer IC
  • Created an LED blinking circuit using resistor-capacitor timing components
  • Learned the working of the 555 Timer in astable mode
  • Improved PCB layout and routing skills

3. Push Button LED Circuit

  • Designed a circuit to control an LED using a push button switch
  • Learned switch connections and basic input-output circuits
  • Practiced schematic design and PCB layout creation

4. Transistor LED Circuit

  • Designed an LED switching circuit using a transistor
  • Learned the basics of transistor operation and switching applications
  • Improved understanding of electronic components and PCB design workflow

5. Traffic light controller

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Traffic light controller design
  • Complex PCB routing and component placement

6. Temperature control

  • Working of DHT11 sensor
  • I2C principle of nano
  • Implementing displays in PCB
  • PCB schematic and footprints

7. Door lock system using RFID

  • Working of RC522 module
  • SPI principle
  • Using servo motor in PCB design
  • Working with connectors
  • PCB routing (B-Cu)
  • Buzzer implementation

Skills I Am Learning

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Microcontrollers
  • SPI and I2C principles

Goal

To improve my PCB design skills, strengthen my electronics knowledge, and build real-world embedded and PCB projects step by step.

Parts

4
QtyValueFootprintReferences
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
1BC547Package_TO_SOT_THT:TO-92_InlineQ1
1LEDLED_THT:LED_D5.0mmD1

More from Yuvaraaj-007/KiCad-Learning

7
  • 2 layers45.5 × 35 mmTraffic light controller, the printed circuit board in 3D

    Traffic light controller

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    11 parts
  • 2 layers40.5 × 50 mmArduino Nano Development Board, the printed circuit board in 3D

    Arduino Nano Development Board

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers49.5 × 52 mmRFID door lock, the printed circuit board in 3D

    RFID door lock

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers50 × 31.5 mmLED 555timer, the printed circuit board in 3D

    LED 555timer

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    6 parts
  • 2 layers20 × 23 mmAutomatic Night lamp, the printed circuit board in 3D

    Automatic Night lamp

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    5 parts
  • 2 layers22.5 × 24 mmLED Push Button, the printed circuit board in 3D

    LED Push Button

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts
  • 2 layers45.5 × 50.5 mmTemperature monitor, the printed circuit board in 3D

    Temperature monitor

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts

Similar boards

  • 2 layers83.3 × 65.3 mmSimonShield, the printed circuit board in 3D

    SimonShield

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    46 parts14kMIT
  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers99.1 × 99.7 mmRC6502 General Video Adapter, the printed circuit board in 3D

    RC6502 General Video Adapter

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    80 parts193GPL-3.0
  • 2 layers55.9 × 38.6 mmMega Amp, the printed circuit board in 3D

    Mega Amp

    theacodes/genesynth

    A Sega Genesis inspired synthesizer

    40 parts178Apache-2.0
  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99

Questions

How big is the LED Transistor PCB?

It measures 14.5 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED Transistor use?

4 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED Transistor KiCad files?

From the Yuvaraaj-007/KiCad-Learning repository on GitHub, at the commit this page was made from: the board is LED_Transistor/LED_Transistor.kicad_pcb and its schematic Arduino Nano Development Board/Arduino Nano Development Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED Transistor design in my own project?

Its repository states no licence, so its author keeps all rights: ask Yuvaraaj-007 before reusing the design.