Skip to the content
2 layers50 × 31.5 mmLED 555timer, the printed circuit board in 3D

This repository contains my PCB design practice projects created while learning KiCad.

Size
50 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
7
Pads
18
Tracks, vias
44, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Jun 2026
Updated
4 Jul 2026

Overview

LED 555timer is an open-source printed circuit board by Yuvaraaj-007, from the Yuvaraaj-007/KiCad-Learning repository on GitHub. It is a 2-layer board of 50 × 31.5 mm with 6 parts on 7 nets, routed with 44 tracks and 0 vias.

It is built around the NE555P. Its parts include 3 resistors, 1 capacitor, 1 IC and 1 diode.

Main components

1

README

README.md

KiCad Learning Projects

This repository contains my PCB design practice projects created while learning KiCad.

Projects

1. LED PCB Design

  • My first PCB design project
  • Designed a simple LED circuit with a current-limiting resistor
  • Learned schematic creation, PCB routing, and DRC verification

2. 555 Timer LED Blinking Circuit

  • Designed an astable multivibrator using the 555 Timer IC
  • Created an LED blinking circuit using resistor-capacitor timing components
  • Learned the working of the 555 Timer in astable mode
  • Improved PCB layout and routing skills

3. Push Button LED Circuit

  • Designed a circuit to control an LED using a push button switch
  • Learned switch connections and basic input-output circuits
  • Practiced schematic design and PCB layout creation

4. Transistor LED Circuit

  • Designed an LED switching circuit using a transistor
  • Learned the basics of transistor operation and switching applications
  • Improved understanding of electronic components and PCB design workflow

5. Traffic light controller

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Traffic light controller design
  • Complex PCB routing and component placement

6. Temperature control

  • Working of DHT11 sensor
  • I2C principle of nano
  • Implementing displays in PCB
  • PCB schematic and footprints

7. Door lock system using RFID

  • Working of RC522 module
  • SPI principle
  • Using servo motor in PCB design
  • Working with connectors
  • PCB routing (B-Cu)
  • Buzzer implementation

Skills I Am Learning

  • PCB schematic design
  • PCB layout and routing
  • Design Rule Check (DRC)
  • KiCad workflow
  • Electronic circuit design
  • 555 Timer applications
  • Switch and transistor circuits
  • Microcontrollers
  • SPI and I2C principles

Goal

To improve my PCB design skills, strengthen my electronics knowledge, and build real-world embedded and PCB projects step by step.

Parts

6
QtyValueFootprintReferences
1100KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
110uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1LEDLED_THT:LED_D5.0mmD1
1NE555PPackage_DIP:DIP-8_W7.62mmU1

More from Yuvaraaj-007/KiCad-Learning

7
  • 2 layers45.5 × 35 mmTraffic light controller, the printed circuit board in 3D

    Traffic light controller

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    11 parts
  • 2 layers40.5 × 50 mmArduino Nano Development Board, the printed circuit board in 3D

    Arduino Nano Development Board

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers49.5 × 52 mmRFID door lock, the printed circuit board in 3D

    RFID door lock

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    9 parts
  • 2 layers20 × 23 mmAutomatic Night lamp, the printed circuit board in 3D

    Automatic Night lamp

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    5 parts
  • 2 layers22.5 × 24 mmLED Push Button, the printed circuit board in 3D

    LED Push Button

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts
  • 2 layers14.5 × 20 mmLED Transistor, the printed circuit board in 3D

    LED Transistor

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts
  • 2 layers45.5 × 50.5 mmTemperature monitor, the printed circuit board in 3D

    Temperature monitor

    Yuvaraaj-007/KiCad-Learning

    This repository contains my PCB design practice projects created while learning KiCad.

    4 parts

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the LED 555timer PCB?

It measures 50 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED 555timer use?

6 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED 555timer KiCad files?

From the Yuvaraaj-007/KiCad-Learning repository on GitHub, at the commit this page was made from: the board is LED_555timer/LED_555timer.kicad_pcb and its schematic Arduino Nano Development Board/Arduino Nano Development Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED 555timer design in my own project?

Its repository states no licence, so its author keeps all rights: ask Yuvaraaj-007 before reusing the design.