Skip to the content
PCBKitNew board
NE555P, in 3D

NE555P

Texas Instruments

0℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHS

Extended
Category
Timers , Counters
Package
DIP-8
Pins
8

Overview

The NE555P is a timers , Counter made by Texas Instruments in a DIP-8 package with 8 pins. 0℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHS.

PCBKit's library has its KiCad symbol (Timer:NE555P, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 32,275 are in stock at JLCPCB (part C46749). 575 open-source boards in 500 repositories on GitHub use it.

Symbol

GND1VCC8TRIG2OUT3RST4CONT5THRES6DISCH7
Timer:NE555PFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

From the datasheet

14
Supply, least
4.5 V · VCC, recommended operating min · p. 4
Supply, most
16 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
18 V · VCC, absolute max · p. 4
Works from
0 °C · Operating free-air temperature min · p. 4
Works up to
70 °C · Operating free-air temperature max · p. 4
Junction, hottest
150 °C · Operating virtual junction temperature absolute max · p. 4
Takes working
10 mA · VCC typical, 15V, output low, no load · p. 6
Takes working
3 mA · VCC typical, 5V, output low, no load · p. 6
Takes at most
15 mA · VCC max, 15V, output low, no load · p. 6
A pin gives at most
225 mA · OUT source or sink absolute max · p. 4
Junction to air (P (PDIP))
98.5 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (P (PDIP))
77.8 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (P (PDIP))
61 K/W · Junction-to-board thermal resistance · p. 5
Edge
100 ns · Output rise time typical, CL = 15pF, TA = 25°C, 20% to 80% · p. 7

What it is and has

3
Timing range
Microseconds to hours · p. 1
Operating modes
Astable or monostable · p. 1
Duty cycle
Adjustable · p. 1

Specifications

46
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature range; with respect to GNDmax 18 V4
Output current IOSource or sink; ±225 mAmax 225 mA4
Operating virtual junction temperature TJmax 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±500 Vmax 500 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per ANSI/ESDA/JEDEC JS-002; ±1500 Vmax 1500 V4
Supply voltage VCCNE555; over operating free-air temperature rangemin 4.5 · max 16 V4
Output current IOSource or sink; ±200 mAmax 200 mA4
Operating free-air temperature TANE555min 0 · max 70 °C4
Junction-to-ambient thermal resistance RθJANE555; P (PDIP), 8 PINStyp 98.5 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)NE555; P (PDIP), 8 PINStyp 77.8 °C/W5
Junction-to-board thermal resistance RθJBNE555; P (PDIP), 8 PINStyp 61 °C/W5
Junction-to-top characterization parameter ψJTNE555; P (PDIP), 8 PINStyp 43.9 °C/W5
Junction-to-board characterization parameter ψJBNE555; P (PDIP), 8 PINStyp 60.3 °C/W5
THRES voltage levelNE555; VCC = 15V, TA = 25°Cmin 8.8 · typ 10 · max 11.2 V5
THRES voltage levelNE555; VCC = 5V, TA = 25°Cmin 2.4 · typ 3.3 · max 4.2 V5
THRES currentVCC = 5V to 15V, TA = 25°Ctyp 30 · max 250 nA5
TRIG voltage levelNE555; VCC = 15V, TA = 25°Cmin 4.5 · typ 5 · max 5.6 V5
TRIG voltage levelNE555; VCC = 5V, TA = 25°Cmin 1.1 · typ 1.67 · max 2.2 V5
TRIG currentNE555; TRIG at 0V, VCC = 5V to 15V, TA = 25°Ctyp 0.5 · max 2 uA5
RESET voltage levelVCC = 5V to 15V, TA = 25°Cmin 0.3 · typ 0.7 · max 1 V5
RESET currentRESET at VCC, VCC = 5V to 15V, TA = 25°Ctyp 0.1 · max 0.4 mA5
RESET currentNE555; RESET at 0V, VCC = 5V to 15V, TA = 25°Ctyp -0.4 · max -1.5 mA5
DISCH switch off-state currentVCC = 5V to 15V, TA = 25°Ctyp 20 · max 100 nA5
DISCH switch on-state voltageNE555; VCC = 5V, IO = 8mA, TA = 25°Ctyp 0.15 · max 0.4 V5
CONT voltage (open circuit)NE555; VCC = 15V, TA = 25°Cmin 9 · typ 10 · max 11 V6
CONT voltage (open circuit)NE555; VCC = 5V, TA = 25°Cmin 2.6 · typ 3.3 · max 4 V6
Low-level output voltageNE555; VCC = 15V, IOL = 10mA, TA = 25°Ctyp 0.1 · max 0.25 V6
Low-level output voltageNE555; VCC = 15V, IOL = 50mA, TA = 25°Ctyp 0.4 · max 0.75 V6
Low-level output voltageNE555; VCC = 15V, IOL = 100mA, TA = 25°Ctyp 2 · max 2.5 V6
Low-level output voltageVCC = 15V, IOL = 200mA, TA = 25°Ctyp 2.5 V6
Low-level output voltageNE555; VCC = 5V, IOL = 5mA, TA = 25°Ctyp 0.1 · max 0.35 V6
Low-level output voltageNE555; VCC = 5V, IOL = 8mA, TA = 25°Ctyp 0.15 · max 0.4 V6
High-level output voltageNE555; VCC = 15V, IOH = –100mA, TA = 25°Cmin 12.75 · typ 13.3 V6
High-level output voltageVCC = 15V, IOH = –200mA, TA = 25°Ctyp 12.5 V6
High-level output voltageNE555; VCC = 5V, IOH = –100mA, TA = 25°Cmin 2.75 · typ 3.3 V6
Supply currentNE555; Output low, no load, VCC = 15V, TA = 25°Ctyp 10 · max 15 mA6
Supply currentNE555; Output low, no load, VCC = 5V, TA = 25°Ctyp 3 · max 6 mA6
Supply currentNE555; Output high, no load, VCC = 15V, TA = 25°Ctyp 9 · max 13 mA6
Supply currentNE555; Output high, no load, VCC = 5V, TA = 25°Ctyp 2 · max 5 mA6
Temperature coefficient of timing intervalNE555; Each timer, monostable, TA = MIN to MAX; VCC = 5V to 15Vtyp 50 ppm/°C7
Temperature coefficient of timing intervalNE555; Each timer, astable, TA = MIN to MAX; VCC = 5V to 15Vtyp 150 ppm/°C7
Supply-voltage sensitivity of timing intervalNE555; Each timer, monostable; VCC = 5V to 15V, TA = 25°Ctyp 0.1 · max 0.5 %/V7
Supply-voltage sensitivity of timing intervalNE555; Each timer, astable; VCC = 5V to 15V, TA = 25°Ctyp 0.3 %/V7
Output-pulse rise time trNE555; CL = 15pF, TA = 25°C, 20% to 80%; VCC = 5V to 15Vtyp 100 · max 300 ns7
Output-pulse fall time tfNE555; CL = 15pF, TA = 25°C, 80% to 20%; VCC = 5V to 15Vtyp 100 · max 300 ns7

Pins, by the datasheet

8
1 GND
Ground. · p. 3
2 TRIG
Start of timing input; TRIG < ½ CONT sets output high and discharge open. · p. 3
3 OUT
High current timer output signal. · p. 3
4 RESET
Active low reset input forces output and discharge low. · p. 3
5 CONT
Controls comparator thresholds, outputs 2/3 × VCC, and allows bypass capacitor connection. · p. 3
6 THRES
End of timing input; THRES > CONT sets output low and discharge low. · p. 3
7 DISCH
Open collector output to discharge timing capacitor. · p. 3
8 VCC
Input supply voltage, 4.5V to 16V. · p. 3

Parameters

17
Current - Supply
10mA
Current - Supply(Max)
15mA
Features
Adjustable duty cycle oscillation
Frequency
100kHz
Junction Temperature(Max)
150℃
Operating Temperature
0℃~+70℃
Output Current
200mA
Output Current per Pin(Max)
225mA
Rise Time
100ns
Supply Current
2mA
Thermal Resistance(Junction to Ambient)
98.5℃/W
Thermal Resistance(Junction to Board)
61℃/W
Thermal Resistance(Junction to Case)
77.8℃/W
Timer Number
1
Type
555 Type,计时器/振荡器(单路)
Voltage - Supply
4.5V~16V
Voltage - Supply(Absolute Max)
18V

Order codes

1

Pinout

8
The pins of the NE555P
PinNameType
1GNDPower in
2TRIGInput
3OUTOutput
4RSTInput
5CONTPassive
6THRESInput
7DISCHInput
8VCCPower in

Open-source boards using it

All 575
  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/NE555P" title="NE555P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/NE555P.jpg" alt="NE555P" width="1200" height="900">
A picture that opens the part, for a README
[![NE555P](https://pcbkit.io/embed/parts/ti/NE555P.jpg?size=s)](https://pcbkit.io/parts/ti/NE555P)

Questions

Is there a KiCad symbol and footprint for the NE555P?

Yes. The symbol is Timer:NE555P and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NE555P?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the NE555P datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the NE555P?

JLCPCB lists it as part C46749, with 32,275 in stock; the sellers' links on this page open their listings.

What can replace the NE555P?

Parts like it in the library: the SA555P by Texas Instruments, the NE555D by Texas Instruments, the NE556N by Texas Instruments and the LM555CMM by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NE555P?

575 boards in 500 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8