2 layers102.4 × 46.9 mm
EG8010 A0
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
164 parts17MIT
2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG801017Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
- Size
- 140.7 × 47.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 201
- Nets
- 148
- Pads
- 594
- Tracks, vias
- 1,194, 421
- Pours
- 44
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Oct 2023
- Updated
- 23 Oct 2023
Overview
EG8010 A1 is an open-source printed circuit board by Millisman, from the Millisman/EG8010 repository on GitHub, published under the MIT licence. It is a 2-layer board of 140.7 × 47.4 mm with 201 parts on 148 nets, routed with 1,194 tracks and 421 vias.
It is built around the LM358, TLP250(F) and EL817, with the EG8010, NE555D and 1N4148W among its other parts. Its parts include 85 resistors, 30 capacitors, 19 ICs, 16 diodes and 14 transistors.
Main components
7
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
TLP250(F)
DIP-8-20℃~+85℃ 1 1.5A 1.8V 10V~35V 2.5kV 20mA 500ns 500ns 5V 5kV/us 5mA DC DIP-8 Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
EL817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 18us 18us 5.8mA 50% 50V 5kV 600% 9V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators
EG8010
LQFP-32(7x7)-45℃~+85℃ 2.7V~5.5V 23.4kHz Over Voltage Protection、Under Voltage Protection、Over Current Protection、Soft Start、Overtemperature protection (OTP) LQFP-32(7x7) AC-DC Controllers and Regulators ROHSEG MicroAC-DC Controllers And Regulators
NE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
US1M
SMA-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
README
README.mdEG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
EG8010_A0
EG8010_A0 is the inverter version to replace EGS002. Uses TLP250 optical isolated drivers and a Totem-pole current amplifier to drive high gate capacitance MOSFET transistors. A four-pin Kelvin circuit is used for all connections.
The connection diagram has a minimum of parts. An external +5V power supply is not required if the 7805 is populated on board. The fan is controlled directly from the printed circuit board. Twisted wires are indicated by ovals. Please don't separate them.
MIT License
Design is distributed under the terms of the MIT license.
You can use this project for personal and business. You can make it and sell it. You may modify this project as you see fit. You are bound by the copyright.
NO WARRANTIES of any kind are given!
All actions are at your OWN RISK!
Copyright (c) 2023, Sergey Kostyanoy contact@arduino.uno
Parts
201| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R12, R15, R16, R18, R19, R20, R24, R26, R29, R33, R42, R50, R51 +10 |
| 23 | 4.7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R27, R35, R36, R37, R38, R39, R45, R46, R47, R48, R49, R57, R58, R59, R60 +7 |
| 23 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R31, R32, R34, R40, R41, R43, R44, R52, R53, R55, R56, R64, R65, R67, R68 +7 |
| 11 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C8, C20, C21, C22, C23, C26, C27, C28, C29 |
| 10 | 600Ω@100MHz | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB9, FB10, FB11 |
| 10 | 1N4148W | Diode_SMD:D_SOD-123 | D6, D8, D9, D10, D11, D12, D13, D15, D16, D17 |
| 8 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R13, R21, R22, R23, R25, R30, R75 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C13, C16, C30, C32 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q13, Q15 |
| 4 | 10uF 35V | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C10, C12, C15, C18 |
| 4 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C11, C14, C17 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C31 |
| 4 | C2.54_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3, J4 |
| 4 | NPN | Package_TO_SOT_SMD:TO-252-2 | Q6, Q7, Q9, Q11 |
| 4 | PNP | Package_TO_SOT_SMD:TO-252-2 | Q5, Q8, Q10, Q12 |
| 4 | TLP250 | Package_DIP:DIP-8_W7.62mm_Socket | U12, U13, U14, U15 |
| 4 | TLP250 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | U1, U4, U5, U6 |
| 4 | US1M | Diode_SMD:D_SMA | D2, D3, D4, D5 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R76, R77 |
| 2 | 10K** | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R79, R96 |
| 2 | 25K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 2 | 7805 | Package_TO_SOT_SMD:TO-252-2 | U7, U11 |
| 2 | EL817 | Package_DIP:DIP-4_W7.62mm_Socket_LongPads | U17, U18 |
| 2 | EL817 | Package_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U9, U16 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_8.9x8mm_SilkScreen | OSHW1, OSHW2 |
| 1 | 12Mhz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 12Mhz | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | 330pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 68K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R95 |
| 1 | AMC1200 | Package_DIP:DIP-8_W7.62mm_Socket | U10 |
| 1 | AMC1200 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | U3 |
| 1 | C2.54_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | LCD12832 |
| 1 | CURRENT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | DT0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
| 1 | DT1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP4 |
| 1 | EG8010 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | FRQSEL0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | FRQSEL1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | High Voltage! | Symbol:High_Voltage_Logo_10mm | HV1 |
| 1 | IP+ | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP9 |
| 1 | IP- | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP10 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U20 |
| 1 | MODSEL | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP7 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U19 |
| 1 | OVC | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D14 |
| 1 | SPWTYP | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP8 |
| 1 | SST | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP6 |
| 1 | STATUS | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | VOLTAGE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | VVVF | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP5 |
| 1 | ~ | Symbol:KiCad-Logo2_5mm_SilkScreen | KICAD2 |
| 1 | ~ | Symbol:KiCad-Logo2_6mm_SilkScreen | KICAD1 |
More from Millisman/EG8010
1Similar boards
- 2 layers96.8 × 49.5 mm
EGS002proMAX
shreya2717/Solar-Rooftop-Financing-Market-Risk-Analysis
Solar energy is the cleanest and most available renewable energy source. The Modern technology can harness this energy for a variety of uses, including producing electricity, providing light and heating water for…
109 parts - 2 layers37 × 90 mm
- 2 layers55.5 × 120 mm
- 2 layers66 × 35 mm
Flyback 2
ArgonautGit/kicad-projects
Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.
27 parts - 4 layers230 × 196.7 mm
Steel form Dish washer
R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product
156 parts - 4 layers99.9 × 99.9 mm
- 2 layers95 × 55 mm
Wifi geiger counter
atomicra1n/wifi-geiger-counter
A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.
64 parts - 4 layers170 × 90 mm
Questions
How big is the EG8010 A1 PCB?
It measures 140.7 × 47.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EG8010 A1 use?
201 parts, built around the LM358, TLP250(F), EL817 and EG8010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EG8010 A1 KiCad files?
From the Millisman/EG8010 repository on GitHub, at the commit this page was made from: the board is EG8010_A1/EG8010_A1.kicad_pcb and its schematic EG8010_A0/EG8010_A0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EG8010 A1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).