4 layers185 × 95 mm
Steel form Dish washer PART 1
R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product
131 parts
4 layers230 × 196.7 mm
Steel form Dish washer
R-Mutura/DISHWASHERContains hardware and Software implementation of a dishwasher product
- Size
- 230 × 196.7 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 156
- Nets
- 202
- Pads
- 557
- Tracks, vias
- 1,470, 222
- Pours
- 33
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Jan 2022
- Updated
- 10 Mar 2022
Overview
Steel form Dish washer is an open-source printed circuit board by R-Mutura, from the R-Mutura/DISHWASHER repository on GitHub. It is a 4-layer board of 230 × 196.7 mm with 156 parts on 202 nets, routed with 1,470 tracks and 222 vias.
It is built around the ATMEGA2560-16AU, MAC223A6,127 and HLK-PM01, with the LM358, MPR121QR2 and MOC3021 among its other parts. Its parts include 56 resistors, 20 connectors, 18 capacitors, 13 diodes and 12 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12
ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAC223A6,127
TO-220ABTO-220AB Thyristors (SCR)/Modules ROHSWeEn SemiconductorsTRIACs
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
MPR121QR2
QFN-20(3x3)-40℃~+85℃ 1.71V~3.6V 12 29uA 2kV 3uA Capacitive Touch QFN-20(3x3) Touch Sensors ROHSNXP SemiconductorsTouch Sensors
MOC3021
DIP-6-55℃~+110℃ 1 1.15V 1000V/us 1A 330mW 400V 50mA 5kV 6 No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSLite-OnTriac, SCR Output Optoisolators
EAST1616RGBA8
SMD-6P,1.6x1.6mm120° SMD-6P,1.6x1.6mm RGB LEDs ROHSEverlight ElectronicsRGB LEDs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
EL817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 18us 18us 5.8mA 50% 50V 5kV 600% 9V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
CNR-10D511KBTSA
插件2.5kA 260pF@1kHz 320V 410V 459V~561V 70J 845V 插件 Varistors ROHSCNRVaristors
B5819WS
SOD-323-55℃~+125℃ 1A 1mA@40V 25A 40V 900mV@3A Independent SOD-323 Schottky Diodes ROHSMDDSchottky Diodes
Parts
156| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R6, R8, R10, R23, R24, R25, R35, R36, R37, R39, R42, R43, R45 |
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C10, C12, C13, C14, C15, C16, C17, C18 |
| 9 | CNR-10D511KBTSA | Varistor:RV_Disc_D15.5mm_W5.9mm_P7.5mm | RV1, RV2, RV3, RV4, RV5, RV6, RV10, RV11, RV12 |
| 9 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 7 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R5, R19, R26, R27, R28, R38 |
| 6 | B5819WS | Diode_SMD:D_SOD-323 | D4, D5, D6, D10, D11, D12 |
| 6 | SRA-05VDC-CL | greencharge-footprints:SRA-05VDC-CL | K1, K2, K3, K4, K5, K6 |
| 5 | 100R | Resistor_SMD:R_0603_1608Metric | R18, R46, R48, R49, R51 |
| 5 | 200R | Resistor_SMD:R_0402_1005Metric | R7, R32, R33, R34, R44 |
| 5 | 800R | Resistor_SMD:R_0402_1005Metric | R20, R21, R22, R40, R41 |
| 5 | mmbt3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q5, Q6 |
| 4 | 4.7k | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R15 |
| 4 | MOC3021 | digikey-footprints:DIP-6_W7.62mm | U5, U6, U7, U8 |
| 4 | Q_TRIAC_A1A2G | Package_TO_SOT_THT:TO-220-3_Vertical | D7, D8, D9, D13 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric | R29, R30, R31 |
| 3 | 4.7K | Resistor_SMD:R_0603_1608Metric | R52, R53, R55 |
| 3 | VDR-14D181K | Varistor:RV_Disc_D15.5mm_W5.9mm_P7.5mm | RV7, RV8, RV9 |
| 2 | 150R | Resistor_SMD:R_0603_1608Metric | R47, R50 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 47K | Resistor_SMD:R_0805_2012Metric | R16, R17 |
| 2 | 500R | Resistor_SMD:R_0402_1005Metric | R9, R11 |
| 2 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J5, J18 |
| 2 | EAST1616RGBA8 | greencharge-footprints:EAST1616RGBA8 | U10, U11 |
| 2 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 100u | Capacitor_SMD:CP_Elec_5x5.4 | C7 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R56 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 75K | Resistor_SMD:R_0603_1608Metric | R54 |
| 1 | AC_PWR_IN | greencharge-footprints:KF8500-4PIN | J2 |
| 1 | AMS1117-3.3 | digikey-footprints:SOT-223 | U2 |
| 1 | AP2301 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | ATmega2560-16AU | Package_QFP:TQFP-100_14x14mm_P0.5mm | U3 |
| 1 | BOILER HEATER CONNECTOR | greencharge-footprints:KF8500-4PIN | J12 |
| 1 | Conn_01x03_Male | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J8 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x10_Male | greencharge-footprints:custom_connector_0.83pitch | J20 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | DRAIN PUMP CONNECTOR | greencharge-footprints:SHDR2W100P0X508_1X2_1070X900X1380P | J11 |
| 1 | EL817 | Package_DIP:DIP-4_W7.62mm | U4 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MAG_DOOR_SENSOR | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J4 |
| 1 | MB6S | Package_TO_SOT_SMD:TO-269AA | D3 |
| 1 | MPR121QR2 | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U12 |
| 1 | PS1240P02BT | digikey-footprints:Piezo_Transducer_THT_PS1240P02BT | BZ1 |
| 1 | Pressure Switch 1 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J13 |
| 1 | Pressure Switch 2 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J14 |
| 1 | RTD_BOILER_SENSOR | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | RTD_TANK_SENSOR | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J3 |
| 1 | SCREEN CONNECTOR | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Horizontal | J19 |
| 1 | SOLENOID CONNECTOR | greencharge-footprints:SHDR2W100P0X508_1X2_1070X900X1380P | J10 |
| 1 | SW_Push | greencharge-footprints:K2-1187SQ-D4SW-06 | SW1 |
| 1 | TANK HEATER | greencharge-footprints:KF8500-2PIN | J17 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | WASH PUMP CONNECTOR | greencharge-footprints:SHDR2W100P0X508_1X2_1070X900X1380P | J9 |
| 1 | peristaltic_pump_1 | greencharge-footprints:SHDR2W100P0X508_1X2_1070X900X1380P | J15 |
| 1 | peristaltic_pump_2 | greencharge-footprints:SHDR2W100P0X508_1X2_1070X900X1380P | J16 |
More from R-Mutura/DISHWASHER
2- 4 layers230 × 35 mm
Steel form Dish washer PART 2
R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product
25 parts
Similar boards
- 2 layers43.8 × 25 mm
Calve heater
R-Mutura/calve_heater
Hardware and software Implementation of a calf heater fabric
70 parts1 - 2 layers34 × 94 mm
- 4 layers494.3 × 200 mm
- 4 layers163.3 × 389.8 mm
KilnController
Erhannis/KilnController
ESP32 BLE kiln controller PCB, KiCAD; 2 thermocouples, 3 heating elements.
82 parts1 - 4 layers45 × 65 mm
Console
maltaisn/game-console
Small handheld game console with 6 buttons, 1.5" grayscale display, with bootloader and multi-games support.
84 parts5Apache-2.0 - 2 layers46.4 × 80 mm
3Phase
eauel/openzmeter
openzmeter (oZm) is an Open Source system designed for power quality analysis and smart energy metering in power networks. It has been designed to comply with international standards IEC 61000-4-30 and EN 50160.
153 partsGPL-3.0 - 2 layers85 × 75 mm
Geiger Counter
perpuchaty/MQTT-Geiger-Counter
Portable Geiger counter with WiFi and MQTT. Home assistant compatible
137 parts - 2 layers40 × 80.6 mm
Questions
How big is the Steel form Dish washer PCB?
It measures 230 × 196.7 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Steel form Dish washer use?
156 parts, built around the ATMEGA2560-16AU, MAC223A6,127, HLK-PM01 and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Steel form Dish washer KiCad files?
From the R-Mutura/DISHWASHER repository on GitHub, at the commit this page was made from: the board is dish_washwer_hardware/src/Steel_form_Dish_washer.kicad_pcb and its schematic dish_washwer_hardware/src/AC_ACTUATORS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Steel form Dish washer design in my own project?
Its repository states no licence, so its author keeps all rights: ask R-Mutura before reusing the design.